Skip Nav

John Deere 60G Compact Excavator

Commercial Worksite

John Deere 60G Compact Excavator



The possibilities are almost endless with the John Deere 60G Compact Excavator from Cross Implement in Minier Illinois.

John Deere 60G Compact Excavator 13228 82,108.00 
7120 1 6'1" (1.85M) LONG ARM 0 1,748.00 
9555 1 ANGLE BLADE 0 4,602.00 
TOTAL 13228 88,458.00
24" Bucket


Net Power 39.6 kW (53 hp) @ 2,000 rpm
Operating Weight 6145 kg (13,547 lb.)
Max. Digging Depth 3.77 m (12 ft. 4 in.)
Max. Digging Reach 6.23 m (20 ft. 5 in.)


New $88,458
Now $72,900*

Lease From $9,900/yr x 5yr 200Hour PO $35,500

Loan Rate Terms*
0.0% 12 Mo
1.9% 24 Mo 
2.9% 36 Mo
3.6% 60 Mo

Lease Quote Payment Schedule
Payment Type Payment Date Payment Amount
Payment: 03/24/2015 $ 9,429.21
Payment: 03/24/2016 $ 9,429.21
Payment: 03/24/2017 $ 9,429.21
Payment: 03/24/2018 $ 9,429.21
Payment: 03/24/2019 $ 9,429.21
Purchase Option: 03/24/2020 $ 35,500.00
Total: 03/24/2020 $ 82,646.05

This quote is valid until the Contract Date shown above.
Thank you for using John Deere Financial from Cross Implement in Minier Illinois.

*Qualifies for Low Rate JDF Financing Plus Applicable Participation Fees, Additional Terms and conditions apply. Subject to John Deere Credit Approval with Qualified Down Payment. Not everyone will qualify for low rate option. Residency restrictions may apply.   Offers available on new equipment and in the U.S. only. Prices and savings in U.S. dollars. Product features are based on published information at the time of publication. Product features are subject to change without notice. Items pictured may contain features available for additional charge. Engine horsepower is for comparison purposes and may be less.  Some Restrictions Apply.  Subject to Availability. See Dealer for Details. This schedule is only an estimate. Purchases & Leases not made for production agriculture are subject to sales tax which is in addtion to pricing listed above. Before operating or riding, always refer to the safety and operating information on the vehicle, and in the Operator’s Manual.Offer good thru April 30 2015*

The John Deere 60G Compact Excavator compact size and reduced-tail-swing design enable this small-but-mighty machine to specialize in close-quarters work. But that’s not the only reason to run one. Its highly fuel-efficient, direct-injected diesel meets rigid Final Tier 4 emissions standards and is noticeably quiet so you can put it to work almost anywhere, any time. Standard-equipped with backfill blade, mechanical quick-coupler, and auxiliary hydraulics, plus any of the many optional John Deere Worksite Pro™ attachments, it can make a sizeable impact on your productivity. And profitability.



John Deere 60G Compact Excavator Key Features


  • Meets EPA Final Tier 4 (FT4)/EU Stage IV engine standards.

  • Multifunction monitor displays vital machine info.

  • Larger front windshield provides even better visibility.

  • Additional service door provides easy access.

John Deere 60G Compact Excavator Engine


Final Tier 4The EPA FT4/EU Stage IV technology in our excavators is simple, fuel efficient, fully integrated, and fully supported. Exhaust gas recirculationIt employs field-proven cooled exhaust gas recirculation (EGR) for reducing NOX, and a diesel particulate filter and diesel oxidation catalyst to reduce particulate matter.Auto-idle/Auto-shutdownAuto-idle automatically reduces engine speed when hydraulics aren’t in use. Auto-shutdown further preserves every precious drop of fuel.Impressive torqueLarge diesels deliver impressive torque for more pull-through power when the going gets tough.

John Deere 60G Compact Excavator Hydraulics


Power/economy work modesPower/economy work modes allow you to match engine speed to the application. Select power mode and get the higher engine speeds needed for most general digging work. For lighter digging demands, economy mode reduces engine speed and noise, while improving fuel efficiencyReturn-flow selector valveReturn-flow selector valve accommodates both one- and two-way hydraulic-driven attachments. Make changes with just a twist of the wrist.O-ring face-seal hydraulic fittings virtually eliminate aggravating and costly oil leaks.

John Deere 60G Compact Excavator Cab Comfort


Spacious operator stationSpacious operator stations have wide entryways, making entrance and exit easier than ever. Flat, skid-resistant floor mat removes easily for clean-out. Convenient 12-volt port powers cell phones and other electronic devices. There’s also a large cup holder and seatback compartment for documents.Redesigned cabRedesigned cab’s 50-mm (2 in.) wider, 150-mm (6 in.) taller front glass and single-hinge door provide unsurpassed all-around visibility. Virtually unrestricted visibility, precise feel, and smooth control make our compacts ideal for excavating around existing utilities.Noticeably quieterAfter-treatment device, plus isochronous high-idle speed, helps keep things noticeably quiet. Rubber cab mounts further isolate the operator from noise and vibration to help reduce fatigue. Bi-level climate-control systemAutomatic, high-velocity bi-level climate-control system with auto-motive-style adjustable louvers helps keep the glass clear and the cab comfortable.

John Deere 60G Compact Excavator Ease of Control


Control-pattern selector valveGo from backhoe- to excavator-style controls with just a twist of your wrist. Control-pattern selector valve is conveniently located in a compartment beneath the seat.Pilot-control leversErgonomic short-throw pilot-control levers provide smooth, predictable low-effort fingertip operation.Foot pedalsSwing boom and foldable travel pedals are positioned where they’re easy to operate, yet allow plenty of foot room. Track speedsNo operator activation required for high-speed travel. Track speeds automatically slow to low whenever the travel motors encounter a heavier load. Includes a console-mounted, low-speed lock switch.

John Deere 60G Compact Excavator Ease of Service


Hinged door accessHinged door provides wide-open access to the side-by-side oil cooler and radiator for easier core clean-out.Operator station tiltsOperator station tilts forward 50 degrees, simplifying access to the swing motor, hydraulic control valve, engine starter motor, and alternator.Routine checksRoutine checks such as engine oil level are quickly accomplished from ground level. Convenient lube/maintenance chart helps ensure that nothing gets overlooked.Hydraulic fluid sight gaugeHydraulic fluid sight gauge and see-through coolant reservoir let you quickly check levels at a glance.Maintain proper track tensionA simple grease gun and a wrench are all it takes to quickly maintain proper track tension.Vertical spin-on filtersVertical spin-on filters allow quick and clean changes. Extended engine and hydraulic oil-change intervals let you work longer.

John Deere 60G Compact Excavator Structures and Undercarriage


Reduced-tail-swingReduced-tail-swing design makes this compact extra maneuverable and plenty productive in places with tight spaces.Heavy-duty X-frameHeavy-duty X-frame provides a solid, stable platform that resists material and dirt buildup. Rigid, reinforced D-channel side frames resist impact, providing maximum cab and component protection.Choose the tracksChoose the tracks that are best for the way you work. Rubber tracks traverse virtually any terrain, including paved surfaces. Steel tracks and steel tracks with rubber pads are also available. Optional rubber grousers combine work-anywhere flexibility with steel-track serviceability.Rubber tracksRubber tracks’ unique steel cores resist cracking. Large-diameter drive sprockets and track idlers further increase undercarriage durability.

John Deere 60G Compact Excavator Arm and Boom


Truck loading made easyTruck sideboards are no problem for these compacts. Lift height and reach are plentiful, making truck loading easy.Single-pin swing-postSingle-pin swing-post increases boom stiffness, enhancing the structural integrity of digging components. Wear-resistant hoses are routed for protection and Cordura®-wrapped where exposed.Heavy-duty shieldsHeavy-duty shields deflect material and impacts, protecting the boom cylinders and drive motors. Tungsten-carbide coatingTungsten-carbide coating creates an extremely wear-resistant surface to protect the all-important bucket-to-arm joint. Oil-impregnated bushings enhance durability and extend grease intervals to 500 hours for the arm-and-boom joint and 100 hours for the bucket joint.More digging depth or reachNeed more digging depth or reach? Choose the long-arm/heavy-counter-weight option that provides an increase in both.

John Deere 60G Compact Excavator Attachments


Auger attachmentAdd any of the many available buckets and Worksite Pro attachments to your equipment arsenal and watch utilization take off.Wedge-style couplerWedge-style coupler enables quick changes and accepts a wide variety of buckets and attachments, such as breakers and augers. Standard quick-coupler-equippedStandard quick-coupler-equipped, boom-mounted auxiliary hydraulic lines make attachment hookup a snap.Add a top clampAdd a top clamp for thumb-like dexterity that comes in handy when handling cumbersome objects or cleaning up jobsites.

John Deere 60G Compact Excavator Monitor


Enhanced monitorEnhanced monitor provides vital operating info at a glance and fingertip control of several functions, including auto-shutdown, power/economy modes, and auto exhaust-filter cleaning. Two trip metersTwo trip meters on the monitor let you track engine oil and hydraulic oil changes, or jobsite hours.


John Deere 60G Compact Excavator from Cross Implement serving Illinois from Minier serving all your John Deere Needs in the Bloomington, Peoria, Springfield, Morton, Lincoln Illinois Area.




Back to News
All Articles