John Deere Grease
John Deere Grease
Shop John Deere Multi-Purpose SD Polyurea Grease TY6341
Shop Multi-Purpose Extreme-Duty Synthetic Grease TY25744
Shop Multi-Purpose HD Lithium Complex Grease TY24416
Shop John Deere Multi-Purpose Lithium Grease PT507
Shop Special-Purpose HD Water-Resistant Grease TY24425
Shop Special-Purpose Corn Head Grease AN102562
The purpose of grease is to replace dry friction with either thin-film or fluid-film friction. Choose the correct grease by assessing load, speed, or intermittent action of the moving part. Grease is for use in applications where oil will not collect, such as open bearings or gears. Operating conditions affect grease selection for each application. Conditions include ambient and operating temperature, ambient or water resistance, oxidation stability, etc. The performance characteristics of the grease also need to be understood, including the thickener type, the grease grade (consistency), and the viscosity of the base oil. Grease lubricants are semisolid and have several important advantages: They resist squeezing out, they are useful under heavy load conditions, and they provide sustained lubrication
into areas that are difficult to access.
A lubricant, either grease or oil, by itself is not an enduring substance. It has a service life requiring replacement to allow bearings
to reach their highest potential life span.
Not sure what grease is right for your equipment?
We got you covered give us a call @ 309.392.2150 or look it up your with our
Shop John Deere Multi-Purpose SD Polyurea Grease TY6341
· Ideal in rolling-contact applications
· Premium grease
· -15 to 380°F (-26 to 193°C)
· For high-temperature, extreme-pressure conditions
· Used for initial lubrication at the factory in U-joints and axle bearings
· For excellent protection in corrosive and wet conditions
· Compatible with most other types of grease
· Excellent for all-purpose applications, especially those requiring a severe-duty grease
· Our best multi-purpose grease
Equipment manufacturers' extended service intervals
· NLGI grade 2
· JDM J13E1, J13E4, J13E5 and J25C
· GC-LB
Physical Properties
· Green color (emerald)
· Polyurea thickened
· Paraffinic-base oil with EP and anti-rust additives
Test Analysis
Penetration @ 77°F (25°C), 60 strokes |
275-295 mm/10 |
Dropping point, degrees F |
500°F |
Timken OK load, minimum |
45 lb (20.4 kg) |
Water washout @ 175°F (79.5°C), loss |
2% |
Oxidation pressure drop @ 100 hours, maximum |
10 psi |
Shop Multi-Purpose Extreme-Duty Synthetic Grease TY25744
With the Multi-Purpose Extreme Duty Synthetic Grease there is no need to buy several different greases for different applications. One product can be used for all applications – in the home and on the farm.
Features & Benefits
With the Multi-Purpose Extreme Duty Synthetic Grease there is no need to buy several different greases for different applications. One product can be used for all applications – in the home and on the farm.
Synthetic with Teflon™; no silicone
Premium grease
USDA food-grade, rated H-1, non-toxic, odorless
Repels dirt, dust and grime
Prevents rust and corrosion
Water- and saltwater-proof
Will not drip, run or evaporate
Non-staining
·GC-LB rating, grade 2 grease
“K” certified Kosher product
Dielectric grease ideal for sealing, protecting, and insulating electrical components and connectors
Applications
-45°F to 450°F (-42.7°C to 232°C)
· Tolerates extremely high and cold operating temperatures
· For use around food-processing areas
· Farm, construction and commercial equipment – universal joints, wheel bearings, suspension systems, and brake calipers
· Marine – inboard/outboard drives, prop shafts
· General-purpose – windows, garage doors, hinges, bicycles, shop tools, locks, and many other applications
Service Rating
NLGI grade 2, NLGI (GC-LB), Food Grade (NSF H-1)
Test Analysis
Penetration @ 77°F (25°C), 60 strokes |
280 mm/10 |
Dropping point, oF |
500°F minimum |
Timken OK load, minimum |
40 lb |
Water washout @ 175°F, loss |
4% |
Oxidation pressure drop @ 100 hours, maximum |
10 psi |
Shop Multi-Purpose HD Lithium Complex Grease TY24416
High-temperature and extreme-pressure grease
Applications
· -15 to 350°F (-26 to 177°C)
· Heavy-duty, long-lasting grease
· High-quality grease in heavy-duty applications where lithium greases are recommended or preferred
· For wheel bearings, universal joints, suspension systems, ball joints, and anti-friction plain bearings
· A very good multi-purpose grease
Service Rating
Meets equipment manufacturers’ extended service interval
· NLGI grade 2
· JDM J13C3, J13C3A, and J13C6
· GC-LB
Physical Properties
· Amber color
· Lithium-complex thickened
· Formulated to prevent corrosion and water washout
· Paraffinic-base oil with EP and anti-rust additives
Test Analysis
Dropping point, degrees F |
500°F minimum |
Timken OK load, minimum |
60 lb (27.2 kg) |
Water washout @ 175°F (79.5°C), loss |
4% |
4 Ball EP Weld |
400 kg minimum |
Shop John Deere Multi-Purpose Lithium Grease PT507
Applications
· Ideal for all-season, general-purpose lubrication applications
· -30 to 290°F (-34 to 143°C)
· For light- to medium-duty wheel bearings and U-joints
· Excellent performance in light-duty applications
· A good multi-purpose grease
Service Rating
· NLGI grade 2
· JDM J13C3A and J13C3
Physical Properties
· Reddish brown
· Lithium thickened with high-density polyethylene
Test Analysis
Penetration @ 77°F (25°C), 60 strokes 265-295 mm/10
Dropping point, degrees F 360°F
Shop Special-Purpose HD Water-Resistant Grease TY24425
Applications
· Lawn and grounds care equipment
· Agricultural and industrial machine
· Marine applications
· 0 to 290°F (-18 to 143°C)
· Formulated with higher-viscosity base oil to prevent water washout
Service Rating
· Meets equipment manufacturers’ extended service interval
NLGI grade
Physical Properties
· Blue color
· Lithium 12 thickened
Test Analysis
Dropping point, degrees F 360°F minimum
Rust test, saltwater pass
Timken OK load, minimum 50 lb (22.7 kg)
Water washout @ 175°F (80°C), loss 4%
Shop Special-Purpose Corn Head Grease AN102562
Applications
· Formulated for John Deere corn head and other slow-speed gear cases equal or less than 1000 rpm
· Extra-soft grade of lubricating grease for older John Deere corn heads
· -30 to 330°F (-34 to 165°C)
Service Rating
· NLGI grade 0
· JDMJ13A5, J13E6, and J25A
Physical Properties
· Green color
· Contains extreme-pressure additives
· Excellent at high and low temperatures
· Resists moisture and water washout
· Polyurea thickened
· Contains anti-rust properties
Test Analysis
Penetration @ 77°F (25°C), 60 strokes |
355-385 mm/10 |
Dropping point, degrees F |
450°F |
Timken OK load, minimum |
40 lb (18.1 kg) |
Water washout @ 175°F, loss |
10% |
Oxidation pressure drop @ 100 hours, maximum |
10 psi |