JOHN DEERE - C451R Back

C451R VARIABLE CHAMBER WRAPPING BALERS

VARIABLE CHAMBER WRAPPING BALER
High capacity, high performance 2.2 m wide pre-cutter
Wide hydraulic drop-floor clears even the worst blockage with ease
3 powered fixed rolls and 2 large diameter belt driving rolls inside the chamber

ROUND AFTER ROUND
Whether youre working with dry hay or silage, the 1 Series Round balers are designed to meet the demands of your operation. Utilize data to gain valuable insights to maximize the potential of your field, ensuring the highest quality feed for your cattle.

INTRODUCING THE 1 SERIES ROUND BALERS
A revolutionary leap in baler innovation with cutting-edge technology and advanced features. Capture near real-time moisture and weight data which can be stored and analyzed through the John Deere Operations Center.

NET LIFT ASSIST
Work smarter, not harder. All 1 Series Balers feature the option to include integrated net lift assist, making the loading of net wrap safer and easier.

NET WRAP
John Deere Cover Edge with TamaTec+ and John Deere Edge to Edge with TamaTec+ provide a unique combination of net strength, roll weight, and roll consistency.

GREEN-GARD HAY PRESERVATIVE
Fresh quality bales are the basis of a successful hay operation. And with John Deere GREEN-GARD hay preservative, you can retain the freshness, color and quality of all types of hay by inhibiting mold growth, heating and spoilage.

G5E MONITOR
We packed a lot into our new G5e Display. For one, you get a colorful, easy-to-read 8-inch touchscreen to give you more space for more work details. All in bright, colorful 1080 HD. The G5e gives you clear, insightful data that you can track and adjust on-the-go to get more consistent bales.

BALE DOCUMENTATION WITH JOHN DEERE OPERATIONS CENTER
Monitor and gain insights into your field performance, nutrient-use efficiency, and residue removal with Bale Documentation. By importing your data into the John Deere Operations Center, you can make informed decisions cutting after cutting, year after year, to improve efficiency in your fields.

MAINTENANCE & RELIABILITY

GENUINE AND GUARANTEED
Your John Deere Dealer offers a comprehensive parts inventory, highly trained service technicians, and the expertise to help you get the most out of your equipment investment. Genuine John Deere agricultural parts installed by an authorized John Deere Dealer carry a 12-month, unlimited-hour warranty including labor. If you prefer to handle repairs yourself, all John Deere parts sold carry a 6-month warranty3.

ROUND BALER WEAR PARTS BOX
We know the last thing you want to do is make a trip to the dealership. Thats why we developed the Round Baler Wear Parts Box. With 25 of the most common wear parts on the John Deere 8, 9 and Zero Series 6-ft. diameter round balers, youll be covered when those maintenance needs arise.

FEATURES

VERSATILE, PRODUCTIVE, AND DURABLE PREMIUM PICKUP

CAM-TRACK DESIGN OFFERS THE BEST VERSATILITY
Cam-track technology provides an efficient solution for such needs. The traditional stripper design provides reduced space between the pickup tines and rotor feeder, while the tine motion helps to avoids pinching.
The cam-less technology requires long strippers, creating a dead zone between the tines and rotor. Additionally, fixed tines can easily pinch crops in sticky conditions, causing plugs that need to be manually removed.

The cam-track pickup features a low turning speed and big bearings on both side of the tine bars. The cam lever is made of forged steel. All these features guarantee a long component life and low maintenance.

PREMIUM PICKUP PUSHES HARVESTING CAPACITY A STEP FORWARD
The C451R Wrapping Baler is designed for the most demanding operators. The pickup features only premium components and concepts such as:

2.2-m (7.2-ft) wide pickup, with a 1.92-m (6.3-ft) tine-to-tine distance - this important width provides comfort and speed capacity when harvesting the largest swaths.

Five tine bars - the fifth bar allows the tines to rake two more times per second versus the John Deere standard four-tine pickup.

O-shaped tubular tine bars with central spider reinforcement - tine bars are assembled with ball bearings on the central spider, and central spiders highly limit tine bars bending in the very heavy crops.

6mm (0.23-in.) diameter galvanized tines with high strength to harvest the toughest crops.

Tines are designed to fold to replace potential shear bolt or cam clutch overload safety. 6-mm (0.23-in.) diameter tines push pickup maximum intake capacity up to 18 kW (24.1 hp), a value often not reached by machines using cam or shear bolt protected pickup.

Stainless-steel strippers (exclusive feature) that give highly durable rust protection, perfect gliding capacity no matter the material, and is much more resistant to acid damage caused by additive uses (propionic acid).

HIGH-CAPACITY FEEDING SYSTEM BOOSTS PRODUCTIVITY
The C451R and C461R Balers use the premium pickup that is also equipped on high-spec V4X1R Variable Chamber Balers. To fit all conditions, the baler is available with a 2-m (6.56-ft) or 2.2-m (7.22-ft) width.

The pickup, driven by 19.05-mm (0.75-in.) heavy-duty chains, features five tubular tine bars with a low rotating speed. The large-diameter strippers allow five tine bars in the pickup. With bearings added to the cam track, all these features provide a smooth and quiet ride with extended uptime.

In addition to the high-spec features, the C451R and C461R benefit from stainless-steel strippers, a market exclusive. Stainless steel provides the following advantages:

No rust
Constant gliding capacity
High resistance to aggressive additives such as propionic acids

The C451R and C461R Balers pickup uses the cam-track design, providing a better solution to harvesting wet crops. Contrary to the cam-less design, the cam track pickup:

Features a short space between the tines and rotor, limiting dead zone
Avoids pinching area, so no crops are plugged into the pickup drums

HIGH-CAPACITY (HC) ROTOR FOR HIGHER PRODUCTIVITY AND DURABILITY

To maximize productivity in the toughest swaths, the F441R Baler features an HC Premium rotor design. Exclusive 48-cm (18.9-in.) converging augers are aligned with the rotor, limiting the free space between pickup teeth and rotor. Plugging risk is also decreased and crop transfer is highly improved. The simple HC Premium rotor design also reduces the number of moving parts and provides reliability. For example, stress on the rotor is distributed along the rotor to avoid overhang load on the bearings.

Additionally, all rotors feature tines that are made of Hardox wear plate which drastically improves wear resistance, especially in rocky fields (Hardox wear plate tines provide 80 percent or more resistance versus traditional S700 grade steel).

The C451R and C461R are only available with a pre-cutter, offering space between knives as short as 40 mm (1.57 in.) or 80 mm (3.15 in.).

HIGH CUTTING QUALITY PROVIDES BETTER FORAGE
The C451R and C461R Balers are efficient in baling a high amount of cut silage. The MaxiCut HC 13 Premium and MaxiCut HC 25 Premium feature exclusive high- quality knives, providing several advantages:

Bulk heat treatment to reduce risk of knife breakage.
Surface heat treatment of the cutting area to provide better cutting quality and knife durability.

A knife slot fillers set is delivered as standard with all machines featuring the pre-cutter. When using the MaxiCut HC Premium pickup without knives, dust and harvest matter can fill knife slots. This keeps the knives from returning to the cutting position, and plugs must be manually removed to free the knives.

SELECT NUMBER OF KNIVES FROM THE CAB TO INCREASE UPTIME
The C451R and C461R can be used on several kinds of crops, in which knives can be engaged or removed. No matter the rotor type or monitor, this operation is easily managed from the cab.

When using the MaxiCut HC 25 Premium pre-cutter, crops can be cut as short as 40 mm (1.57 in.), but only half of the knives can be engaged. This system proposes to use two different sets of knives for the same cutting width, to allow the use of sharp knives longer. By using sharpened knives versus blunt, fuel consumption can be decreased by up to 10 percent.

DROP FLOOR CAN REMOVE THE WORST PLUGS
No matter the operator experience, plugs can still occur, especially with large silage swaths. The C451R and C461R are equipped as a base with a drop floor unplugging system. The drop floor features exclusive advantages, such as:

Full-width design - by covering the full pickup width, the device can remove plugs, even located under converging augers.
Parallel kinematic - no rear or front hinge means no narrowing. The F441R drop floor offers a constant 40-mm (1.6-in.) free space through the feeding channel when activated. This is enough to decompress the crops and avoid crop loss.

No matter the pre-cutter or monitor type, the drop floor unplugging system can be easily managed from the cab.

Hardox is a trademark of SSAB Technology AB.

HIGH-CAPACITY (HC) PREMIUM ROTORS GRAB THE TOUGHEST SWATHS

THE C451R BENEFITS FROM THE PROVEN HC ROTOR CONCEPT, FEATURING AN IN-LINE DESIGN

By using the HC premium rotor a device available on John Deere round balers since 2012 the C451R feeding system offers:

Limited distance from the pickup to rotor tines to reduce plugging, especially in brittle straw or short silage
Reduced number of bearings and distributed loads along the rotor to increase reliability
Large 48-cm (18.9-in.) diameter converging augers facilitate crop transfer

The overall result is optimized crop flow that avoids all dead area where crops stay for a long time.

This smooth and regular crop flow guarantees high feeding capacity, especially in short crops such as brittle straw or sticky silage.

MAXICUT HC 13 PREMIUM ROTOR OFFERS STANDARD CUTTING LENGTH COUPLED WITH HIGH PRODUCTIVITY AND VERSATILITY
The C451R Wrapping Baler can be delivered with a MaxiCut HC 13 Premium rotor.

The rotor features:
Close to 50-cm (19.7-in.) diameter rotor for high inertia and feeding capacity.
Three tines per turn (instead of two on G-Series RotoFlow HC)
Tines fully enclosing the tube (instead of spikes on G-Series RotoFlow HC), giving higher tine resistance and longer component lifetime
0/13 knives engagement from the display. No need to leave the cab to manage knives.
80-mm (3.1-in.) knife spacing when all knives are engaged, a standard cutting length that gives a good compromise between crop quality and power consumption.
Heavy-duty knives thanks to the double hardening and tempering treatment. Crops are perfectly cut for long, requiring less fuel consumption and sharpening operations.
Hardox wear plate material (similar to R-Series) to provide a long lifespan and high resistance to foreign objects (Hardox wear plate tines provide 80 percent or more resistance versus traditional S700 grade steel).
Individually spring-loaded knives to avoid component damages when grabbing foreign objects. Compared to a shear bolt or full-set hydraulic system, this technology limits the effort on the knives and/or provides non-stop safety.

MAXICUT HC 25 PREMIUM PROVIDES HIGH-QUALITY FINE CHOPPED CROPS

For enhanced forage quality or for special application (poultry bedding, fruits, and vegetables application), MaxiCut HC 25 Premium can be assembled on R-Series Balers.

As with the RotoFlow HC Premium or MaxiCut HC 13 Premium, this fine chop precutter features:

Close to 50-cm (19.7-in.) diameter rotor for high inertia and feeding capacity.
Three tines per turn (instead of two on G-Series RotoFlow HC).
Tines fully enclosing the tube (instead of spikes on G-Series RotoFlow HC), giving higher tine resistance and longer component lifetime.
Hardox wear plate material (similar to R-Series) to provide a long lifespan and high resistance to foreign objects (Hardox wear plate tines provide 80 percent or more resistance versus traditional S700 grade steel).

The fine-chop pre-cutter function offers additional features such as:

0/12/13/25 knife engagement from the display. No need to leave the cab to manage knives. When used alone, the 12 or 13 knives set provides a regular 80-mm (3.1-in.) knife spacing and limited power consumption. When paired together, knife spacing is reduced to 40 mm (1.6 in.).

Heavy-duty knives thanks to the double-hardening and tempering treatment. Crops are perfectly cut for long, requiring less fuel consumption and sharpening operations. When cutting at a regular 80-mm (31-in.) length, the two independent knife sets extend time between each sharpening process by using the first knife set one day and the second one on the next day (time between each sharpening process given can vary greatly depending on crop type and number of bales).

Individually spring-loaded knives to avoid component damage when grabbing foreign objects. Compared to a shear bolt or full-set hydraulic system, this technology limits effort on the knives and/or provides a real non-stop safety.

Hardox is a trademark of SSAB Technology AB.

EXCLUSIVE DROP-FLOOR CONCEPT REMOVES THE WORST PLUGS

DROP FLOOR WITH PARALLEL KINEMATIC PROVIDES A CONSTANT FREE SPACE TO REMOVE PLUGS

The C451R Baler comes with a drop-floor unplugging system. In case of clog, the drop floor is managed from the display simultaneously or independently from the knives. When lowering the floor, the parallel kinematic has 40-mm (1.57-in.) extra free space under the rotor and converging augers.

By providing a constant free space, the John Deere drop floor avoids bottlenecks existing on balers using movable floors with front or rear hinges. No need to have a huge opening (that sometimes causes crop loss), only a few free centimeters (inches) are enough to remove the plug.

The worst plugs generally happen when turning with the baler. In such situations, the crops are blocked under the converging augers and the clog must be manually removed. The unique John Deere drop floor features a full width, protecting the full pickup and rotor width. Even when plugged at the converging auger level, the clog can be easily removed by the operator from the cab.

MAXD (MAXIMUM DENSITY) BALE CHAMBER PUSHES VERSATILITY AND BALE WEIGHT OVER THE LIMITS

PROVEN HIGH DENSITY AND BALE WEIGHT
A is bale diameter (cm) symmetric across the 0-degree axis, and B is bale density (kg/m3)

The C451R can produce bales from 0.8-m (2.6-ft) diameter for non-wrapped materials or 1.0-m (3.3-ft) diameter for wrapped crops up to 1.60-m (5.2-ft) diameter with a 1.21-m (4-ft) bale chamber width. The diameter of wrapped bales can be pushed up to 1.45-m (4.76-ft).

The MaxD Maximum Density bale chamber has been designed to deliver very heavy, dense, and perfectly shaped bales, officially proven by DLG.

OFFSET DENSITY ARM PROVIDES TENSION TO THE BELTS

The C451R density is provided by an offset tension arm that applies hydraulic tension to the belts and not directly to the bale. This heavy-duty component is not involved in belt length compensation, so 100 percent of hydraulic power is involved in belt tensioning.

Density is easily set from the monitor and can be adjusted from 0 to 100 percent of hydraulic pressure. A virtual gauge located on the main working page continuously follows the density increase without looking back to the baler.

Density can also be adjusted manually from the hydraulic valve in case of major failure.

WIDE ENDLESS BELTS PROVIDE DENSITY AND REDUCE CROP LOSS

The C451R Round Balers feature two wide 573-mm (22.56-in.) belts, meaning that only three free spaces are observed (one between the two belts plus one on each belt side). Compared to a traditional 5/6 belts solution, only using two belts optimizes bale coverage by approximately 4 percent. The result is significant crop loss limitation and more efficient baling process.

To be able to handle huge stress transmitted by the density arm, the belts have no lacers.

An advanced belt tracking system, including wide front pulleys and several guides located throughout the chamber, ensures accurate belt positioning, even when working in slopes or when overloading one pickup side. All edges of parts potentially in contact with the belts are chamfered to avoid belt side damage. A take-up arm manages belt tension compensation during the unloading process to avoid potential belt tracking issues.

Belts are driven by two large-diameter rubber rolls with a large contact surface that avoid belt slippage in very wet conditions. Springs linked to the density arm are located on both sides of the chamber and give enough tension to the belts from bale starting.

To limit crops from sticking, belts feature a smooth pattern. Paddles on belts' driving rolls, cleaning augers into the density arm, and other scrapers located in several places through the belts paths continuously clean the belts and remove crop accumulation around the bale chamber.

BALE CHAMBER ROLLS MAKE EASY BALE STARTING IN ALL CONDITIONS

MaxD bale chamber features three powered rolls to improve versatility and bale quality:

Rolls are positioned to give the bale a perfectly round shape, regardless of the bale diameter, and the core is ideally centered.
As belts push crops against rigid steel rolls, high pressure is easily applied and provides high-density bales.
The three powered rolls facilitate bale starting, especially in wet conditions such as silage. Forage immediately turns into the chamber, and there is no slipping risk even with the heaviest bales.

OPTIONAL HYDRAULIC BELTS SCRAPPERS CLEAN BELTS IN EXTREME CONDITIONS

Both V451R and V461R can be delivered ex-factory with optional hydraulic belts scrapper. This device limits sticky/wet/sugared crops accumulation in density arm. Thanks to the rubber pad, this cleaning system is particularly gentle with belts. Scrapper is automatically deactivated during bale ejection.

For enhanced lifetime, scrapper can be manually shut-off when baling dry materials.

HEAVY-DUTY COMPONENTS TEAM HIGH DENSITY AND DURABILITY

Heavy bales, high density, high baling speed, and high tractor power directly impacts baler durability. The C451R Round Baler includes several heavy-duty components into the bale chamber to meet growers expectations:

The front part of the bale chamber (front side sheets) the most stressed area is made with Hardox steel plates to limit impact of aggressive crop friction.
Tailgate frame is specially reinforced around the lock to handle huge tension.
Top belts driving roll receive a special heat tempering.
Lower Fast Release System (FRS) roll handling a large part of the bale weight features extra thickness (plus 40 percent versus standard rolls) for extended durability.

STANDARD SOFTCORE SYSTEM PROVIDES PERFECT CROP QUALITY

The C451R benefits from a standard advanced softcore system management:

Bale core diameter can be set from the monitor.
Softcore system can be activated/deactivated from the display.
Bale core density (different from the overall bale density) can be adjusted from 0 to 100 percent of maximum density capacity from the monitor.

Accurate softcore settings allow:
Production of better-quality forage when harvesting crops with residual moisture.
To easily unroll core of bales.

FAST RELEASE SYSTEM (FRS) A KEY TO UNBEATEN PRODUCTIVITY

WHY EACH SECOND COUNTS
The size of the tailgate directly impacts bale transfer time, and the bale chamber unloading system is a critical component in a wrapping baler.

John Deere FRS greatly decreases non-productive time and directly boosts overall baler productivity. As summarized by an official DLG Fokus test 6112F: "The signature trait of this baler is the innovative ejection system, which provides considerable advantage through a very short bale ejection time. This shortens the hold time of the baler during ejection, which can consequently lead to a higher rate of productivity."

There is an advantage to the baler compactness: by using a vertical folding structure, the C451R allows a quick transfer right after the bale has been unloaded from the chamber. FRS can close as soon as the bale leaves the unloading areas and the picking process can restart a short time after the bale has been ejected from the chamber.

On all other wrapping balers, the bale must first reach a far enough position before the tailgate can close (to avoid bale/tailgate interference risk). This transfer requires time and keeps the baler wrapping from restarting quickly.

LIGHTER TAILGATE MEANS FASTER TAILGATE
FRS provides a light structure, less than half of the traditional tailgate weight that opens the chamber quickly and removes belts from the bale.

Compared to a traditional tailgate:

FRS can be actuated by fast cylinders with reduced dampening needs.
FRS impacts the balers lifetime in a reduced way. Moving less than 250 kg (551 lb) puts less stress on the frame than moving 600 kg (1322.8 lb) in a similar time.
FRS pivot is located at the center of the chamber, not on the top of the baler. Motion is even faster, and center of gravity is not impacted much by tailgate position.

MOVING SIDE SHEETS RELEASE THE BALE FASTER
Moving side sheets help prevent the bale from getting stuck in the chamber. When the light structure opens, each side of the chamber automatically moves 50 mm (2 in.). There is no more contact between the bale and the chamber; the bale is released and quickly falls by its own weight. Even in the worst wet conditions, the unloading process is as efficient as in dry straw.

This unique feature does not require complicated hydraulic or mechanical systems to be actuated. When the tailgate goes down, simple bearings push on cams located on both side sheets and lock the chamber sides in the baling position. When the tailgate opens, the pressure on the side sheets cam is automatically released, then a return spring quickly moves the chamber walls outside.

Locks located on both baler side lock the FRS when tailgate is closed.

HIGH SPEED WRAPPING ARMS - BALE FASTER THAN EVER

BALANCED CYCLE TIME BETWEEN BALING AND BALE WRAPPING FUNCTIONS IS KEY
The design of a very efficient and productive baler is not sufficient if the film wrapping unit is not able to follow the same rhythm of work. John Deere engineers came up with smart solutions to eliminate bottle necks and boost total productivity.

The core trick to achieve such productivity is in an innovative and powerful hydraulic motor which can drive the film wrapping arm over 35 rpm speed (a record on the market) and without any compromise for operator safety, as an integrated and automatic brake could stop every motion in a short time.

CHANGING FILM ROLLS IS QUICK AND EASY
The C451R and C461R are equipped with a unique film roll storage device. Each film roll weighs about 20 kg (44 lb) and must be changed very often; this system has been designed to simplify loading and unloading operations.

On each side of the machine, five rolls are installed on a moving arm, hydraulically piloted. Managed by a control panel standing on both sides of the baler, the system prevents the operator from running from the left side to the right side to operate storage racks, as is the case on several competitive wrapping balers. The loading/unloading position has been set up to be as close as possible to the wrapping arms at a very ergonomic height.

The C451R and C461R are equipped with a unique film roll storage device. Each film roll weighs about 20 kg (44 lb) and must be changed very often; this system has been designed to simplify loading and unloading operations.

On each side of the machine, five rolls are installed on a moving arm, hydraulically piloted. Managed by a control panel standing on both sides of the baler, the system prevents the operator from running from the left side to the right side to operate storage racks, as is the case on several competitive wrapping balers. The loading/unloading position has been set up to be as close as possible to the wrapping arms at a very ergonomic height.

Details count: in the transport position, the film storage device is covered by a roof which protects film rolls from rain. This protects the film roll core, often made of cardboard, from damage.

HIGH EFFICIENCY EVEN IN SLOPES
To improve and secure bale transfer when working in very hilly condition, a bale transfer slope kit is available as option or attachment. Two tubes gently guide the bale to the wrapping area while dedicated cams limit side sheets opening, preventing the bale from going askew.

ADVANCED DISPLAYS AND ELECTRONICS ALLOW THE OPERATOR TO DRIVE THE BALER FROM THE MONITOR

The C451R Wrapping Baler uses ISOBUS architecture and can be fully set from the display. There is no need for the operator to leave the cab, even for density or greasing parameters (when equipped with optional automatic greasing system), as everything is managed from drop-down menus.

The C451R offers:

BALER SETTINGS
Knife engagement/disengagement
Knife set management (when equipped with MaxiCut HC 25 Premium)
Drop floor lowering/raising
Bale diameter adjustment
Bale density adjustment (0 to 100 percent capacity)
Softcore activation/deactivation
Softcore pressure adjustment (0 to 100 percent capacity)
Softcore diameter adjustment
Net/twine choice
Automatic/manual tying/wrapping starting
Manual net/twine cylinder control
Net layers adjustment
Net tying delay adjustment
Twine turns on each side (independent) adjustment
Twine spacing adjustment
Twine space to the edges adjustment
B-Wrap wrapping system mode activation
Automatic greasing system engagement/disengagement (when equipped with optional automatic greasing system)
Automatic greasing duration and frequency

WRAPPING UNIT SETTINGS
Automatic/manual tailgate opening and bale transfer
Transport table speed curve
Number of film layers
Automatic/manual wrapping
Wrapping arm speed curve
On the go/when stopped/manual/grouper mode dumping
Dumping speed curve
Lighting (side lights/beacon) control when option selected

BALER INFORMATION
Bale shape indicators
Current bale diameter/set bale diameter
Current bale density/set bale density
Knife set position
Drop-floor position
Near full alarm
Stop indicator
Net/twine choice
Net/twine process status
Tailgate status
Softcore status
Bale counters (10 operators x 10 fields = 100 counters)
Time counter
Clear error message

WRAPPING UNIT INFORMATION
Transport table position
Wrapping arms position
Wrapping process status (number of applied layers)
Dumping status
Greasing status
Lighting status

4240 UNIVERSAL DISPLAY ENHANCES OPERATOR COMFORT
The C451R can be delivered with various monitors. At the top of the baler range, the 4240 Universal Display can be ordered. This monitor features a 21.5-cm (8.5-in.) diagonal color display. The touchscreen offers an intuitive and user-friendly interface that easily allows operators to adjust and control various settings.

The 4240 Universal Display offers extended capabilities for guidance, spraying management, farm management, and FarmSight applications. To be used with ISOBUS or non-ISOBUS tractors, the 4240 Universal Display option is delivered with the following components:

4240 Universal Display
Baler to rear tractor ISOBUS plug
Baler ISOBUS plug to display harness plugged into tractor battery
Tractor cab corner to monitor harness

THE OPERATOR'S OWN ISOBUS MONITOR CAN BE USED TO OPTIMIZE COST OF ACQUISITION AND/OR COMFORT

For operators already using a built-in or external ISOBUS certified display, the C451R Baler can be delivered without a monitor. Thanks to the ISOBUS connectivity, just plug the baler to the tractor/monitor and bale.

B-Wrap is a trademark of Tama Plastic Industry.

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate