JOHN DEERE - 714 Back

JOHN DEERE 714 MULCH TILLER

HIGHLIGHTS
Simple gang depth adjustment
Coulter gangs
Three-bar frames
Stabilizer wheels

FEATURES
CRANK-ADJUST DEPTH CONTROL AVAILABLE
The crank-adjust single-point depth control is standard equipment on all models and offers the following benefits:
More precise adjustment when changing the operating depth
Easy access at the front of the machine
Accurate, repeatable depth control

SIMPLE GANG DEPTH ADJUSTMENT
The three-bar disk gang model features a mechanical depth adjustment:
Depth adjuster bolts (1) allow adjustment of individual gangs up or down within a 140-mm (5.5-in.) range.

An optional hydraulic depth adjustment (2) is available:
Allows on-the-go hydraulic adjustments to be made from the tractor seat
Gangs adjust up or down within a 140-mm (5.5-in.) range

THREE-BAR FRAMES OFFER STRENGTH
THE THREE-BAR FRAME:
Is constructed of three ranks of standards
Has strength to match higher horsepower tractors
Handles heavier residue levels

THREE-BAR FRAME MODELS HAVE THESE STRENGTH FEATURES:
One-piece welded construction
Solid steel in rear mainframe member
102-mm x 102-mm (4-in. x 4-in.) cross members
51-mm x 102-mm (2-in. x 4-in.) side members
76-mm x 127-mm (3-in. x 5-in.) diagonal frame supports

LONG, NARROW HITCH FOR GOOD MANEUVERABILITY IN TIGHT HEADLANDS
THE LONG NARROW HITCH DESIGN:
Allows good maneuverability in tight headlands
Is constructed of 51-mm x 127-mm (2-in. x 5-in.) steel tubing for strength
Heavy cast-steel hitch link for yoke-type drawbars is standard equipment
Hitch clevis is available for use with straight drawbars (not recommended for tractors over 150 engine hp)

A Level-lift linkage with easy turnbuckle leveling enables the mulch tiller to remain level whether in transport or in the field position. A hitch jack is included with all models for storage and easier hookup to the tractor.

COULTER GANGS
Coulter blades are for use where little incorporation is desired or for erosion-prone areas where it is important to disturb as little residue as possible. Blades are on 229-mm (9-in.) spacing to reduce the chance of plugging.
Two-position blade down-pressure adjustment ensures consistent blade down pressure in light- or heavy-residue conditions.
Coulter gangs have rigid scraper bars.
Dura-Flex bearings and welded steel spools provide reliable performance and durability.
Gangs are spring-cushioned with 140 mm (5.5 in.) of vertical travel to provide protection against rocks or other obstructions.

CHOICE OF RIGID, SPRING-RESET, OR TRU-DEPTH STANDARDS
RIGID STANDARD:
In base equipment on all models
32 mm x 51 mm x 813 mm (1.25 in. x 2 in. x 32 in.)
Economical design is suited for fields having few obstructions
Till to a maximum depth of 279 mm (11 in.)
Good clearance to handle heavy trash (813 mm (32 in.) of underframe clearance | 381-mm (15-in.) center-to-center spacing)

SPRING-RESET 813-MM (32-IN.) STANDARD:
Optional on all models
32 mm x 51 mm x 813 mm (1.25 in. x 2 in. x 32 in.)
Suited for fields having rocks or other obstructions
Till to a maximum depth of 279 mm (11 in.)
Trip height of 254 mm (10 in.) for good clearance
296-kg (650-lb) trip force
Automatically resets to the original working position after clearing an obstruction
Good clearance to handle heavy trash (813 mm (32 in.) of underframe clearance | 381-mm (15-in.) center-to-center spacing)

TRU-DEPTH STANDARD:
Optional on all models
51 mm x 32 mm x 813 mm (2 in. x 1.25 in. x 32 in.)
Edge bent for extra strength
Designed to work in rocky ground and heavy draft conditions
Till to a maximum depth of 279 mm (11 in.)
Trip height of 279 mm (11 in.) for excellent clearance
568-kg (1250-lb) trip force
Once an obstruction is cleared, the standard automatically returns to its original working position
Excellent clearance to handle heavy trash (813 mm (32 in.) of underframe clearance | 381-mm (15-in.) center-to-center spacing)

VARIETY OF GROUND-ENGAGING TOOLS AVAILABLE TO MATCH CONDITIONS
A variety of shovels are available to match conditions:
76-mm x 610-mm (3-in. x 24-in.) concave twisted shovels for use in a wide range of average soil conditions are base equipment.
102-mm x 610-mm (4-in. x 24-in.) concave twisted shovels for use in light, sandy soils or where greater fracturing between the standards is desired, are optional equipment.
51-mm x 305-mm (2-in. x 12-in.) chrome carbide point chisel provides excellent strength and wear life in tough-to-penetrate conditions.

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate