UNVERFERTH - PRO-FORCE 2650 Back

UNVERFERTH PRO-FORCE 2650 DRY FERTILIZER SPREADER

The Unverferth Pro-Force dry fertilizer spreader features larger carrying capacities for fewer stops to fill, unrivaled spreading accuracy and consistency, and a wide range of options, such as an ISOBUS scale package and tracked undercarriage for greater flotation. The Pro-Force dry spreader can handle common fertilizer, compost, poultry litter, and cover crop seed with operator-friendly innovations, top-of-the-line performance, and heavy-duty components for professional producers looking to maximize yield. With the optional Duo-, Tri- or Quad Force multi-hopper options, you can spread up to four different products at the same time, each with a variable rate. Pull-type model capacities range from 14 tons up to 26 tons and chassis-mounted hoppers are available from 8.5 tons up to 20 tons. These features make the Pro-Force dry granular spreader the ideal match for commercial applicators, professional producers, and growers of all sizes.

HOPPER

LARGE CARRYING CAPACITIES
Pull-type models include 2650, 2250, 1850, and 1450 with capacities of 26 tons, 22 tons, 18 tons, and 14 tons respectively. Chassis-mounted hoppers are available in models 2050, 1850, 1650, 1450, 1350, 1250 and 1150 and feature capacities of 20 tons, 18 tons, 16 tons, 14 tons, 13 tons, and 8.5 tons respectively.

PREMIUM DESIGN
The hopper is 102 wide with 12" sideboards (except for the 1250 model) and is constructed of premium 304 stainless steel for the most corrosive-resistant, longest-lasting finish.

MULTI-HOPPER OPTIONS
The Pro-Force dry fertilizer spreader can be equipped with multi-hopper options that allow you to spread 2, 3, or 4 separate products at the same time, each with a variable rate. The Duo-, Tri-, and Quad Force options can be added or removed from the Pro-Force dry spreader main hopper at any time because the back panel of the main hopper does not need to be removed.

CONVENIENCE FEATURES
The hopper features a standard bin-level sensor that alerts the operator when the hopper is getting low on material. The standard window in the front hopper panel allows the operator to easily see the contents inside.

SPREADING SYSTEM

PINPOINT ACCURACY
Spread common fertilizer up to 90, lime and gypsum up to 60, soybean and cover crop seed up to 70, and compost up to 45 with pinpoint accuracy because of the field-proven spinner design.

SPINNER DISKS
Dual 30 spinner assemblies feature a deep dished design and 6 of the most aggressive fins in the industry that produce a wider spread pattern with precision application rates, even in windy conditions. The dish design in each spinner disk optimizes the departure angle of the dry material for consistent spread patterns.

BELT-OVER-CHAIN
The 34 wide belt-over-chain conveyor system provides a leak-free seal for accurately dispensing material onto the spinner disks. The vee-cleat rubber belt is fastened to the chain for worry-free operation.

END GATE
The fixed material divider at the end of the belt-over-chain conveyor ensures even distribution to each spinner. The removable hillside baffle holds material in place when traveling through uneven terrain. The end gate door features a convenient handle and measurement decal to ensure the door is opened to the correct height.

PULL-TYPE SPREADERS

CAPACITIES
Pull-type models are available with an 840, 710, 580, or 450 cubic-foot capacity hopper, which are among the largest in the fertilizer spreader industry! 840 cubic foot model is for spreading compost or poultry litter only and all models feature standard 12 sideboards.

CONTROLS
The Raven RCM ISOBUS rate controller is standard equipment and allows the operator to use the tractors virtual terminal screen to control the rate. An on/off master foot switch is included in conjunction with the ISOBUS rate control system.

UNDERCARRIAGE
The fully adjustable axle can achieve row spacings from 76 to 12 with single wheels and tires and 60 through 152 with dual wheels and tires to accommodate row spacings ranging from 22 to 38.

TRACKS
The optional 36 wide x 112 long hydraulically tensioned track system features a 106 rigid axle for the greatest in-field flotation. The track system features a 2-bogie design, 32 main end wheels with 8-bolt hubs, cast-iron pivoting bogie wheels and convenient pressure gauge for verifying the belt tension.

ADDITIONAL FEATURES
Standard protective covers under the hopper prevent corrosive material from falling onto the pull-type undercarriage. The pulling tractor requires 38 gallons per minute of hydraulic flow, 2 SCV remotes, and a case drain for proper operation.

PULL-TYPE OPTIONS
For accurate weight recording and in-field calibration, the optional scale system features an innovative design for accurate weight measurements. Models 2650 to 1850 feature a 6-point shear-beam load cell design and the 1450 model features a 4-point shear-beam load cell design. The scale system will work directly through the VT screen in your tractor cab, or you can opt for a separate 410 indicator to operate the scale system.

CHASSIS-MOUNT SPREADERS

CAPACITIES
Chassis-mount spreaders are available with a 645, 580, 515, 450, 415 or 270 cubic-foot capacity hopper. The 270 cubic-foot models is specifically designed for self-propelled sprayer chassis and can be equipped with optional 4 or 12 sideboards to increase the capacity to 300 or 385 cubic feet.

MOUNTING
When mounting to a floater chassis or a self-propelled sprayer, it is always important to note the maximum capacity of the chassis when mounting a spreader hopper. Lift lugs are standard and permit easy handling when installing or removing the hopper.

CHASSIS-MOUNT OPTIONS
Options for the chassis-mount spreaders include mud flaps to protect the front and rear of the unit, an oil cooler system, a hydraulic unloader valve for tractors without a PTO, a hydraulic gear pump for mounting to a chassis with an air system and ball valves for chassis that do not have hydraulic on/off.

OPTIONS & ACCESSORIES

ROLL-TARP
The roll-tarp system with stainless steel end caps is available to protect the hoppers contents. Electric operation of the roll-tarp is also available and provides added operator convenience.

OTHER OPTIONS
Additional options for the Pro-Force dry fertilizer spreader include a 2nd heavy-duty gearbox on models 1350 and larger which places one gearbox on each side of the belt-over-chain conveyor for even distribution. An optional #2 conveyor chain is available in lieu of the belt-over-chain for spreading compost and poultry litter.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate