JOHN DEERE - DS30 Back
JOHN DEERE DRY NUTRIENT SPINNER SPREADER BOX DS30
In as few as 4 hours, convert your self-propelled sprayer into a 3-season applicator
Spread up to 10 tons of fertilizer, with spread widths up to 105-feet wide 25% to 50% wider than leading competitors
Apply two products simultaneously at predetermined or variable rates, reducing time in the field, compaction, and fuel
For 612R and 616R Sprayers (300 cu ft. capacity)
NEW LEADER DRY SPINNER SPREADER OFFERS MAXIMUM VERSATILITY
Get three-season flexibility from your application equipment with the New Leader DS30 Dry Spinner Spreader. The DS30 offers of up to 8.5-m3 (300 cu ft), or 9 tons, of dry fertilizer.
WIDE SPREAD WIDTHS ARE AVAILABLE WITH THE NEW LEADER DRY SPINNER SPREADER
The DS30 provides up to 32-m (105-ft) spread widths and the adjustable spinner assembly allows for quick, accurate settings during variable-rate applications, broadcasting materials farther and wider with consistent spread patterns, and producing industry-leading productivity. Depending on product a F4365 with 1.38-m (54-in.) spinner height, can achieve spread widths from 18.92 to 27.43 m (60 to 90 ft), but with the increased clearance of 1.74 m (68 in.) the 400R and 600R Dry Spinner Spreader can achieve spread widths from 21 to 32 m (70 to 105 ft). Added spread width increases the number of acres per day and decreases the number of passes, which also reduces fuel costs and compaction.
By maintaining spread width, operators can consistently place product throughout the fields and prevent bottlenecking of product at the row end. With a full spread pattern and reduced overlap through integrated technologies such as AutoTrac automated steering and John Deere Section Control, the 400R and 600R Dry Spinner Spreaders allow for full product coverage while reducing input costs from overlap.
Additionally, by combining the John Deere 400R or 600R Dry Spinner Spreader chassis and the New Leader dry spinner spreader, operators can maintain spread widths even when rpms are reduced. John Deere's pressure-and-flow-compensated hydraulics allows operators to maintain spinner speed throughout each pass, while maintaining consistent spread width and pattern. This added height allows a greater trajectory at a lower spinner speed and has the ability for later season applications.
NOTE: With differences in fertilizer density, size, and crush strength a spread pattern test is the only way to measure a product's true spread width and pattern.
NEW LEADER BOXES ARE DESIGNED TO BE MULTAPPLIER READY
The optional 304 stainless-steel MultApplier insert provides machine flexibility as it can be ordered factory installed or field installed for dual product application. Bolt-in end gates and stainless-steel fittings make converting from a dual product to a single product dry spinner spreader easy. The DS30 MultApplier insert has a Bin 2 stuck capacity of 3 m (106 cu ft), offsetting the capacity of Bin 1 to 4.59 m (162 cu ft). The dual hopper system features two independent conveyors that can simultaneously apply up to two products at predetermined rates or variable rate application with swath widths up to 25 m (84 ft), decreasing time in the field, soil compaction, fuel consumption, and increasing return on investment.
GENERATION 4 COMMANDCENTER DISPLAY WITH SPREADSTAR SYSTEM
400 and 600 Series Sprayers and Dry Spinner Spreaders utilize the 4600 CommandCenter and SpreadStar controller allowing integrated control with the machine and dry spinner spreader. The CommandARM controls, Gen 4 CommandCenter display, and SpreadStar have been updated and tailored to the needs of operators allowing them to see all key functions on one run screen including AutoTrac assisted steering system, variable rate documentation, field totals, and dry spinner spreader settings. The Gen4 CommandCenter display allows operators to set up and apply single or dual products, utilizing variable rate map-based prescriptions with John Deere Section Control functionality. Click anywhere on the display to expand and easily adjust information.
DELIVER ACCURATE RATE CONTROL WITH INTEGRATED SPREADSTAR DRY RATE CONTROL SYSTEM
The SpreadStar dry rate control system is a standard feature that is integrated into the design of the self-propelled spreader chassis (not a third-party ISO control add-on) and delivers accurate and consistent on-target rate control. All dry spreading and vehicle functions are displayed on the Gen 4 4600 CommandCenter display for easy operation and setup. In addition to these functions, all precision technology can be used on the same display for complete integration and ease of operation. The engine, chassis, dry spreader system, and precision controllers provide central communication through the display for many vehicle and dry system functions that are simple and easy to use.
Provides superior rate control, response times, and ease of use
Provides superior rate control, response times, and ease of use
Rate control locks on to the desired application rate much more quickly and maintains it better than third-party controllers
Easy to understand and simple to set up the key values you must enter to execute the spreading job
o No cross reference to nodes or a task controller like other third-party systems
High-speed hydraulic pulse-width modulated control valve varies conveyor shaft speed to produce only the required product flow with easy-to-follow feed rate calibration procedures
Engine, transmission, and hydraulic drive pump work together to optimize efficiency of the entire system, providing fuel savings and optimizing power to the ground and delivery of product to the spinners.
JOHN DEERE CONNECTED SUPPORT PREVENTS DOWNTIME AND EFFICIENTLY RESOLVES ISSUES WITH REVOLUTIONARY TECHNOLOGY-BASED SOLUTIONS
When you buy John Deere equipment, you expect reliability. You also know that problems can happen, and a product is only as good as the support behind it. Thats why John Deere equipment is prepared with technology that senses potential issues and can alert you and your dealer promptlyin the cab or anywhere you are. John Deere Connected Support is a revolutionary change to support that leverages technology and the connectivity of JDLink telematics to prevent downtime and resolve problems faster. These tools decrease downtime by an average of 20 percent, enabling faster responses to unexpected problems and reducing technician trips to your machine. For some issues, unplanned downtime can even be prevented altogether through prediction of the issue.
With your permission, John Deere Connected Support:
Keeps you running by monitoring machine health and promptly alerting you and your dealer of issues
Saves time by remotely viewing in-cab displays, reducing trips to the machine
Reduces or even eliminates technician trips to a machine through remote diagnostic and remote software reprogramming capabilities
Connects experts with the information needed to respond to downtime faster and prevent it altogether
Specifications are subject to change without prior notice.
Similar models may be shown in addition to the featured model. Equipment may be shown with options.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate