Skip Nav

JOHN DEERE - 1575 Back

Request a Quote
Year :
2023
Condition :
New
Model Number :
1575

JOHN DEERE 1575 - TERRAINCUT FRONT MOWERS

You get excellent cut quality, with your choice of a rear-discharge deck or our legendary 7-Iron PRO deck. And when the grass stops growing, the TerrainCut 1500 Series keeps on going with snow blowers, blades, brooms and more at its disposal.

KEY FEATURES
7-Iron PRO Side Discharge or Fastback Rear Discharge Deck
Diesel Engine
Integrated ComfortCab
Compatible with select front blade, snow blower and broom attachments

DIESEL ENGINE HAS HIGH-QUALITY FEATURES TO MINIMIZE OPERATING COST
Economical cast-in block cylinder design for good cooling and long life
Indirect fuel injection (1550)
Direct fuel injection (1570, 1575, 1580, 1585)
Injects fuel directly on top of pistons for more efficient combustion
Delivers more horsepower per gallon of fuel
Improves starting
Develops more horsepower per gallon of fuel and improves starting
Aluminum alloy pistons with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat transfer characteristics
Design permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by gas and noise from the piston slap
Higher top rings on the piston and a thinner head gasket greatly reduce the volume of unburned waste gases and increase combustion efficiency
Timing gears and injector drive gears utilize helical profile gears to help lower engine noise; gear teeth have a newly designed roll-off profile, giving almost no clash, no noise, and no backlash
Fuel filter with replaceable element
Full-pressure intake manifold provides quick starts in temperatures down to 0F (-18C) (optional engine coolant heater attachment assists starting under more extreme conditions)
Auto-bleed fuel system there is no need to prime the system if the tractor runs out of fuel; the system self-primes the injection pump, lines, and injectors, providing fast fuel recovery
Key start and shutoff eliminates fuel shut-off knob; electric solenoid shuts fuel supply off immediately when key is turned off
See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
Enclosed engine compartment to keep out debris and lower sound levels
Sealed radiator compartment to keep trash and debris on outside of hood
Excellent torque for plenty of lugging power when operating in tough mowing conditions
Full-pressure lubrication for positive lubrication, even when operating on slopes
Dual-element, dry-type, replaceable air cleaner completely sealed for effective cleaning
90 percent to 95 percent of dirt ejected before it reaches the paper element
Secondary safety element for additional filtering
Progressive-type air restriction indicator to let operator know when the filter needs servicing
Automotive-type alternator for plenty of charge to the battery and power for accessories
75 amp for open-station models
95 amp for ComfortCab models
Automatic initiation of air heater for easier cold-weather starting
Automotive-sensing system tells operator when engine is ready to start

MOWER DECKS FOR TERRAINCUT FRONT MOWERS MATCH A WIDE VARIETY OF NEEDS
The mower is designed to provide exceptional cut quality at higher travel speeds:
The mower deck is stamped from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside, with fewer sharp corners, for reduced material buildup.
Provides precision components and long deck life
Single piece of steel means no welds to break
Provides a smooth underside, without corners, reducing material buildup
0.75-in. (1.9-cm) solid steel bar is welded to mower deck perimeter for added strength.
The rounded corners of the stamped deck help distribute impact stress to reduce the potential of damage when the mower contacts trees, rocks, curbs, and other fixed obstacles.
A deep-deck design of 5.5-in. (14-cm) delivers excellent airflow so material can be processed quickly and efficiently.
1-in. to 6-in. (2.5-cm to 12.7-cm) cutting heights, in 0.5-in. (1.3-cm) increments, allow the operator to match all mowing conditions.

STANDARD PREMIUM COMFORTCAB PROVIDES SUPERIOR COMFORT AND PERFORMANCE
The ComfortCab is standard equipment on the 1575 and 1585 TerrainCut Front Mowers. It is one of the most comfortable and easy-to-use cabs available anywhere. This premium cab was developed using extensive research and testing, and some of the most advanced design techniques available.

Cab vehicles are designed for operators who demand superior comfort and performance:
Large-property owners
Commercial operators
Governmental agencies
Producers

Whether mowing or doing other implement work (such as use of the snow blower, rotary broom, or front blade), the TerrainCut Front Mowers have the versatility and muscle to get the job done, all while protecting the operator from the elements.

EASY-TO-OPERATE CONTROLS MAXIMIZE PRODUCTIVITY
Maneuverability:
Turn radius of 13 in. (33 cm)
Uncut circle of 28 in. (71.1 cm) with a 72-in. (183-cm) 7-Iron PRO mower deck
Deck offset and pulled rearward
Tail-follows-the-trail trimming capability with 72-in. (183-cm) side-discharge mower deck
Steered wheels (tail) stay within the path (trail) cut by the mower deck, allowing maneuverability without the rear of the machine contacting mowing obstacles

SERVICEABILITY IS DESIGNED-IN TO REDUCE MAINTENANCE COST AND INCREASE UPTIME
Engine hood includes large screened area:
Minimizes the amount of material that can get to the cooling radiators
Minimizes the need to clean the hood screens
Hood latch keeps the hood securely in place, providing an optimum seal:

A single hood latch is located on top of the hood behind the seat. Designed-in service accessibility helps ensure daily maintenance is completed to keep the machine operating at peak performance.

The hood opens rearward, exposing the following:
Engine
Oil and fuel filter
Hydraulic oil cooler
Radiator check/fill

The hood can be totally removed, if necessary. The seat flips forward for access to air filter, fuse bank, engine oil dipstick, and front of engine.

WELDED FRAME STRUCTURE IS MADE OF HIGH-STRENGTH STEEL
The revolutionary tubular, high-strength welded steel frame provides durability and allows major components to be located lower in the machine:
The design results in a lower center of gravity for better stability and traction on hillsides and slopes.
Rollover protective structures (ROPS) are integral members of the frame.

DURABLE DESIGN
Durability features of the frame include:
Heat-treated cast-iron axles with 1.24-in. (3.15-cm) kingpins
Internal wet-disk brakes
Hydraulic PTO clutch, with brake
Provides smooth engagement and long life
Hydrostatic oil cooler
O-ring seal (ORS) hydraulic fittings
Integrated, shaft-driven power take-off (PTO)
Sealed relays and electrical connectors
Heavy-duty, dual hydraulic cylinders
Nodular cast-iron lift arm sockets
Cast-iron rear bumper

HYDROSTATIC TRANSMISSION AND TRANSAXLE ARE HEAVY-DUTY TO MAXIMIZE UPTIME
Durability features include the following:
High-capacity hydrostatic transmission and heavy-duty transaxle maximize performance and uptime and minimize cost of maintenance.
Charge pump is used to efficiently deliver oil to the transmission.
Oil cooler helps maintain optimum transmission oil temperature for superior performance and longer transmission life in the most challenging operating conditions.
Maximum forward top speed is 12 mph (19.3 km/h) on the 1550, 1570, and 1575 and 15 mph (24.1 km/h) on the 1580 and 1585.
Self-bleeding design helps keep air out of the system.

TWO-FUNCTION MECHANICAL REAR-WHEEL DRIVE FOR OPTIMUM USE OF THE FOUR-WHEEL DRIVE FEATURE
Mechanical rear-wheel drive is available as standard equipment (1575, 1580, 1585) or as a factory-installed option (1550, 1570):
On-demand four-wheel drive automatically engages and disengages as needed.
Constantly maximizes trimming ability
Offers better fuel economy than full-time four-wheel drive
Provides better steering tire wear than full-time four-wheel drive
Increases traction and trimming ability to allow a novice operator to mow like an expert
Works in the forward direction only
Full-time four-wheel drive is on at all times.
Can be engaged or disengaged on the go
Provides maximum traction and flotation in poor conditions
Works in reverse as well as the forward direction
Two-wheel drive position is available on 1580 and 1585 with two-speed transaxle.
Disengages rear axle when transporting at high ground speeds

TAIL-FOLLOWS-THE-TRAIL DESIGN HELPS AVOID OBSTACLES IN TURNS
Tail-follows-the-trail trimming with 72-in. (183-cm) mower decks. Steered wheels (tail) stay within the path (trail) cut by the mower deck, allowing maneuverability without the rear of the machine contacting mowing obstacles.

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate

Request a Quote
Year :
2023
Condition :
New
Model Number :
1575
Request Information
News

John Deere Spring Parts Catalog 2024

John Deere Parts Catalog Spring 2024 PreSeason Saving on Parts, Equipment, Supplies, and More
Read More

John Deere Spring Parts Sale Catalog 2023

Save Now on the John Deere Parts You Need for the Upcoming Spring Season Now thru February 27 2023 from Your Local John Deere Dealer Cross Implement
Read More

Make It Better | John Deere LED Rotary Beacon Low Profile RE596223

LED beacon light is available as a field installed attachment. The new design is shorter making it less susceptible to damage.
Read More
X