JOHN DEERE - 1570 Back
JOHN DEERE 1570 - TERRAINCUT FRONT MOWERS
You get excellent cut quality, with your choice of a rear-discharge deck or our legendary 7-Iron PRO deck. And when the grass stops growing, the TerrainCut 1500 Series keeps on going with snow blowers, blades, brooms and more at its disposal.
7-Iron PRO Side Discharge or Fastback Rear Discharge Deck
Compatible with select front blade, snow blower and broom attachments
DIESEL ENGINE HAS HIGH-QUALITY FEATURES TO MINIMIZE OPERATING COST
Economical cast-in block cylinder design for good cooling and long life
Indirect fuel injection (1550)
Direct fuel injection (1570, 1575, 1580, 1585)
Injects fuel directly on top of pistons for more efficient combustion
Delivers more horsepower per gallon of fuel
Develops more horsepower per gallon of fuel and improves starting
Aluminum alloy pistons with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat transfer characteristics
Design permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by gas and noise from the piston slap
Higher top rings on the piston and a thinner head gasket greatly reduce the volume of unburned waste gases and increase combustion efficiency
Timing gears and injector drive gears utilize helical profile gears to help lower engine noise; gear teeth have a newly designed roll-off profile, giving almost no clash, no noise, and no backlash
Fuel filter with replaceable element
Full-pressure intake manifold provides quick starts in temperatures down to 0F (-18C) (optional engine coolant heater attachment assists starting under more extreme conditions)
Auto-bleed fuel system there is no need to prime the system if the tractor runs out of fuel; the system self-primes the injection pump, lines, and injectors, providing fast fuel recovery
Key start and shutoff eliminates fuel shut-off knob; electric solenoid shuts fuel supply off immediately when key is turned off
See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
Enclosed engine compartment to keep out debris and lower sound levels
Sealed radiator compartment to keep trash and debris on outside of hood
Excellent torque for plenty of lugging power when operating in tough mowing conditions
Full-pressure lubrication for positive lubrication, even when operating on slopes
Dual-element, dry-type, replaceable air cleaner completely sealed for effective cleaning
90 percent to 95 percent of dirt ejected before it reaches the paper element
Secondary safety element for additional filtering
Progressive-type air restriction indicator to let operator know when the filter needs servicing
Automotive-type alternator for plenty of charge to the battery and power for accessories
75 amp for open-station models
95 amp for ComfortCab models
Automatic initiation of air heater for easier cold-weather starting
Automotive-sensing system tells operator when engine is ready to start
MOWER DECKS FOR TERRAINCUT FRONT MOWERS MATCH A WIDE VARIETY OF NEEDS
The mower is designed to provide exceptional cut quality at higher travel speeds:
The mower deck is stamped from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside, with fewer sharp corners, for reduced material buildup.
Provides precision components and long deck life
Single piece of steel means no welds to break
Provides a smooth underside, without corners, reducing material buildup
0.75-in. (1.9-cm) solid steel bar is welded to mower deck perimeter for added strength.
The rounded corners of the stamped deck help distribute impact stress to reduce the potential of damage when the mower contacts trees, rocks, curbs, and other fixed obstacles.
A deep-deck design of 5.5-in. (14-cm) delivers excellent airflow so material can be processed quickly and efficiently.
1-in. to 6-in. (2.5-cm to 12.7-cm) cutting heights, in 0.5-in. (1.3-cm) increments, allow the operator to match all mowing conditions.
EASY-TO-OPERATE CONTROLS MAXIMIZE PRODUCTIVITY
Turn radius of 13 in. (33 cm)
Uncut circle of 28 in. (71.1 cm) with a 72-in. (183-cm) 7-Iron PRO mower deck
Deck offset and pulled rearward
Tail-follows-the-trail trimming capability with 72-in. (183-cm) side-discharge mower deck
Steered wheels (tail) stay within the path (trail) cut by the mower deck, allowing maneuverability without the rear of the machine contacting mowing obstacles
FRONT MOWER SEATS HAVE STANDARD SUSPENSION WITH ARM RESTS FOR ADDED COMFORT AND PRODUCTIVITY
Operator comfort enhances productivity. TerrainCut Front Mowers include suspension seats with green accents and an embroidered John Deere logo. The comfort-adjust mechanical spring suspension seat is base equipment, and an air-ride suspension is an optional upgrade. The operator can adjust suspension by increasing or decreasing pressure for optimum comfort. Fore-aft adjustments accommodate both tall and short operators.
Both seats are 24-in. (61-cm) tall and include back-angle, lumbar, and arm rest adjustments. The eye-catching seats are constructed from two unique vinyl textures and sewn with decorative stitching. Retractable seat belts prevent belts from becoming tangled in the seat suspension and controls.
Other comfort features include:
Standard cup holder
Noise level meets North American and European standards
SERVICEABILITY IS DESIGNED-IN TO REDUCE MAINTENANCE COST AND INCREASE UPTIME
Engine hood includes large screened area:
Minimizes the amount of material that can get to the cooling radiators
Minimizes the need to clean the hood screens
Hood latch keeps the hood securely in place, providing an optimum seal:
A single hood latch is located on top of the hood behind the seat. Designed-in service accessibility helps ensure daily maintenance is completed to keep the machine operating at peak performance.
The hood opens rearward, exposing the following:
Oil and fuel filter
Hydraulic oil cooler
The hood can be totally removed, if necessary. The seat flips forward for access to air filter, fuse bank, engine oil dipstick, and front of engine.
WELDED FRAME STRUCTURE IS MADE OF HIGH-STRENGTH STEEL
The revolutionary tubular, high-strength welded steel frame provides durability and allows major components to be located lower in the machine:
The design results in a lower center of gravity for better stability and traction on hillsides and slopes.
Rollover protective structures (ROPS) are integral members of the frame.
Durability features of the frame include:
Heat-treated cast-iron axles with 1.24-in. (3.15-cm) kingpins
Internal wet-disk brakes
Hydraulic PTO clutch, with brake
Provides smooth engagement and long life
Hydrostatic oil cooler
O-ring seal (ORS) hydraulic fittings
Integrated, shaft-driven power take-off (PTO)
Sealed relays and electrical connectors
Heavy-duty, dual hydraulic cylinders
Nodular cast-iron lift arm sockets
Cast-iron rear bumper
HYDROSTATIC TRANSMISSION AND TRANSAXLE ARE HEAVY-DUTY TO MAXIMIZE UPTIME
Durability features include the following:
High-capacity hydrostatic transmission and heavy-duty transaxle maximize performance and uptime and minimize cost of maintenance.
Charge pump is used to efficiently deliver oil to the transmission.
Oil cooler helps maintain optimum transmission oil temperature for superior performance and longer transmission life in the most challenging operating conditions.
Maximum forward top speed is 12 mph (19.3 km/h) on the 1550, 1570, and 1575 and 15 mph (24.1 km/h) on the 1580 and 1585.
Self-bleeding design helps keep air out of the system.
TWO-FUNCTION MECHANICAL REAR-WHEEL DRIVE FOR OPTIMUM USE OF THE FOUR-WHEEL DRIVE FEATURE
Mechanical rear-wheel drive is available as standard equipment (1575, 1580, 1585) or as a factory-installed option (1550, 1570):
On-demand four-wheel drive automatically engages and disengages as needed.
Constantly maximizes trimming ability
Offers better fuel economy than full-time four-wheel drive
Provides better steering tire wear than full-time four-wheel drive
Increases traction and trimming ability to allow a novice operator to mow like an expert
Works in the forward direction only
Full-time four-wheel drive is on at all times.
Can be engaged or disengaged on the go
Provides maximum traction and flotation in poor conditions
Works in reverse as well as the forward direction
Two-wheel drive position is available on 1580 and 1585 with two-speed transaxle.
Disengages rear axle when transporting at high ground speeds
DUAL DRIVE TIRES ARE AVAILABLE TO OPTIMIZE PERFORMANCE IN CHALLENGING CONDITIONS (1550 AND 1570 ONLY)
Dual 23x8.5-12 drive tires are available for increased hillside stability, flotation, and reduced ground compaction.
In addition, single drive tires may be set in the narrow or wide position to match mowing conditions.
TAIL-FOLLOWS-THE-TRAIL DESIGN HELPS AVOID OBSTACLES IN TURNS
Tail-follows-the-trail trimming with 72-in. (183-cm) mower decks. Steered wheels (tail) stay within the path (trail) cut by the mower deck, allowing maneuverability without the rear of the machine contacting mowing obstacles.
ROLL-GARD ROLLOVER PROTECTIVE STRUCTURES PROTECTS OPERATORS OF OPEN-STATION MOWERS
The foldable two-post Roll-Gard rollover protective structure (ROPS) and retractable seat belt are standard equipment.
Foldable for trimming, such as when mowing under trees or bushes
Similar models may be shown in addition to the featured model. Equipment may be shown with options.
Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate