JOHN DEERE - Z920M Back
JOHN DEERE Z920M - Z900 SERIES COMMERCIAL ZTrak ZERO-TURN MOWERS.
Our ZTrak 900 Series zero-turn mowers were designed with our commercial lawn mowing customers in mind. And since you all have different needs, we came up with different ways to help you meet them. The M Series mowers are the mowers that hit the sweet spot of performance and durability. Mulch On Demand option lets you switch instantly from mulching to side-discharging. Expanded height-of-cut range is easy to adjust. And Electronic Fuel Injection models are available, giving you the right amount of fuel at the right time.
7-Iron PRO Mowing Deck
Mulch On Demand Available
California CARB Approved
36 months or 1200 hours, whichever comes first. First 24 months, no hour limitation
POWERFUL COMMERCIAL-GRADE ENGINE DELIVERS CLASS-LEADING PERFORMANCE & EFFICIENCY
The Z920M is powered by an air-cooled, vertical shaft engine
23.5-hp (17.5-kW) gas engine
Overhead valve design
More horsepower and torque per cubic inch of displacement
Better fuel efficiency
Full-pressure lubrication with full-flow filter
Reduces engine wear by ensuring proper lubrication, even when operating on hillsides or uneven terrain
Oil filter helps keep oil clean for increased engine life
V-twin big block design
Easy-access, dual-element air filter with quick release latch
Aluminum block engines: Effectively dissipate heat, Lightweight and strong construction, Extend engine life due to elimination of debilitating engine temperatures, Air-cooled engine design
EXTRA DURABILITY & MOWING PERFORMANCE FROM 7-IRON II SIDE-DISCHARGE DECKS PRESSED FROM A SINGLE PIECE OF STEEL
Deck is stamped from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside with fewer sharp corners for reduced material buildup
Significantly fewer welds on the deck shell to wear or break - it is stamped from a single sheet of steel rather than multiple fabrications
An anti-skid step on the deck provides easy machine mounting
Extra reliability and long life with cast-iron blade spindle housings
Higher blade tip speed than many competitors - 18,500 fpm (5,639 m/min) for more blade cuts per inch mowed
A deep-deck design of 5.5 in. (14 cm) delivers excellent airflow so material can be processed quickly and efficiently
The wider and higher discharge opening provides even clipping dispersal for an excellent finished appearance in all conditions
Quick-release belt covers do not require tools or the removal of a ring clip; just lift one corner of the cover and rotate it slightly to remove
A hole in the deck tab is provided for use of an optional ring clip for extra security, if desired
This makes it quick and easy for you to clean out trash that may collect around the spindle sheave
AVAILABLE MULCH ON DEMAND DECK
The Mulch On Demand mower deck delivers unprecedented levels of productivity and versatility to commercial mower operation. With the ability to switch between side discharge and mulching operation with the flip of a lever as the operator mows, keeping most clippings out of landscaping features and where they are wanted is extremely easy.
THREE SEAT CHOICES WITH ComfortGlide FORE/AFT SUSPENSION OFFER EXCEPTIONAL OPERATOR COMFORT
There are three seating options available for the M Series, all of which are factory installed:
1. Deluxe comfort seat with armrests
2. Deluxe comfort seat with armrests and isolation
3. Fully adjustable suspension seat with armrests
Each seat has the ComfortGlide fore/aft suspension system that gives superior ride comfort over uneven areas:
Seat can travel up to 2 in. (50.8 mm) fore and aft to absorb bumps for a significant enhancement to ride comfort.
Control lever provides the ability to easily lock out fore/aft suspension movement if desired.
One lever has three functions:
Slide seat forward and back 3 in. (10.2 cm) to allow the operator the ability to choose the leg room needed
Activate ComfortGlide fore/aft seat suspension
Lock out ComfortGlide fore/aft seat suspension
HEAVY-DUTY FRAME PROVIDES STRENGTH & DURABILITY
Heavy-duty, thick-gauge, steel channel mainframe for strength and durability
Cast I-beam caster arms to handle the beating and pounding professional mowers receive
Wide-open access for maintenance and cleaning
DURABLE HYDROSTATIC DRIVE TRAIN THAT DELIVERS BETTER COOLING & PROVIDES EASY ACCESS
The hydrostatic drive features two 13-cc (0.8-cu in.) unitized hydraulic pumps combined with commercial-grade, heavy-duty wheel motors into a single unit
One pump and one motor drive each wheel on the ZTrak E and M Series Mowers
Exceptional cooling in high-load conditions
Easy-to-check level and refill hydraulic oil
Opens up access under the seat
MICHELIN X TWEEL TURF AIRLESS RADIAL TIRE TECHNOLOGY FOR ZTRAK MOWERS ELIMINATES DOWNTIME AND REDUCES COST OF OPERATION
Mowing Performance Is Improved.
o Rutting is reduced because the Michelin X Tweel Turf has more support across the surface for improved flotation and better ground contact
o Unique energy transfer within the poly-resin spokes reduces the bounce associated with pneumatic tires
o Excellent curb climbing is possible due to the Michelin X Tweel Turf construction and flexibility
o More consistent cut quality is achieved because inconsistent tire pressure is eliminated
Uptime Is Improved.
o The exclusive technology eliminates downtime and associated cost due to flat or damaged tires
o Punctures and sidewall damage no longer result in downtime
Cost of Operation Is Reduced.
o Cost of repairs and maintenance is reduced. One single unit replaces the current tire, wheel, and valve assembly. There is no need for complex tire-mounting equipment
o No need to spend time checking and optimizing tire pressure
o The need to purchase and stock plug kits and spare tires is eliminated, particularly for professional landscape contractors and government agencies who normally stock them
o The tire tread will last up to three times longer than current pneumatic tires because automotive-grade rubber is used for the tread
MOWER IS EASY TO SERVICE WITH MANY ACCESSIBLE COMPONENTS
The design of the Z900 Series makes many service components reachable and easily accessible from the ground
Large, open engine compartment at the rear of the machine provides convenient servicing and directs engine heat away from the operator
EXTRA RELIABILITY & LONG LIFE WITH CAST-IRON BLADE SPINDLE HOUSINGS
Superior impact strength with ductile cast-iron material
Gusseted design puts reinforcement where it is needed
Strength of cast iron protects against damage from blade impacts
Easy access grease fittings are mounted at the top of the spindle shafts for convenience
Grease pressure-relief valve minimizes seal damage from overfilling with grease and keeps debris from entering housing
Chance of deck shell damage is minimized with the 8-in. (20.3-cm) diameter housing and six mounting bolts that distribute loads and impacts
Ability to be reliably rebuilt is provided by use of cast iron
PROTECTIVE ZONE AROUND THE OPERATOR IS PROVIDED BY THE ROLLOVER PROTECTIVE STRUCTURE (ROPS)
Getting on and off is easy with the flat operator platform
Convenient-to-use controls located close to the operator are color coded and designed for easy identification and operation
The ROPS and seat belt work in conjunction to provide a protective zone around the operator
It reduces the operators risk of being crushed under the vehicle should it overturn
When used with the seatbelt, the ROPS can reduce the severity of injury in the event of a rollover
Use of the seat belt is recommended when operating with ROPS in the upright position
FIELD-INSTALLED PROPANE CONVERSION KITS FOR COMMERCIAL ZTrak MOWERS
John Deere provides application-specific Environmental Protection Agency (EPA) approved field-installed propane conversion kits for specific John Deere Commercial ZTrak Mowers. The conversion kits include all components required to convert the engines to operate on propane fuel. Single-tank or dual-tank brackets (depending on the vehicle) are provided for securely holding the propane tank(s) to the vehicle.
Propane tanks are not included.
An optional altitude kit is required when operating at altitudes above 2000 ft (610 m). The operators manual with the propane conversion kit provides further details. Parts must be ordered separately through John Deere Parts.
Similar models may be shown in addition to the featured model. Equipment may be shown with options.
Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate