JOHN DEERE - Z915E Back
JOHN DEERE Z915E - Z900 SERIES COMMERCIAL ZTrak ZERO-TURN MOWERS
Our ZTrak 900 Series zero-turn mowers were designed with our commercial lawn mowing customers in mind. And since you all have different needs, we came up with different ways to help you meet them. With the Z915E, you can do basically anything. An 11.5 gallon fuel tank helps you power through large jobs. Professional grade seats with ComfortGlide Suspension keep operators comfortable all day long. And large rear tires for a balanced ride. Plus the 7-Iron II deck stamped from a single piece of 7-gauge steel.
7-Iron II Mowing Deck
Hydrostatic Drive Train
Commercial-grade Operator Seat
36 months or 1200 hours, whichever comes first. First 24 months, no hour limitation
POWERFUL 25.0-hp (18.6-kW) COMMERCIAL-GRADE ENGINE DELIVERS CLASS-LEADING PERFORMANCE & EFFICIENCY
The Z915E is powered by an air-cooled, vertical shaft engine
25.0-hp (18.6-kW) gas engine
Overhead valve design
More horsepower and torque per cubic inch of displacement
Fuel efficient design
Full-pressure lubrication with full-flow filter
Reduces engine wear by ensuring proper lubrication, even when operating on hillsides or uneven terrain
Oil filter helps keep oil clean for increased engine life
V-twin big block design
Easy-access, dual-element air filter with quick-release latch
Complies with strict Environment Protection Agency (EPA) and California Air Resources Board (CARB) emission standards without loss of horsepower or torque
Aluminum block engines: Effectively dissipate heat, Lightweight and strong construction, Extend engine life due to elimination of debilitating engine temperatures, Air-cooled engine design
EXTRA DURABILITY & MOWING PERFORMANCE FROM 7-IRON II SIDE-DISCHARGE DECKS PRESSED FROM A SINGLE PIECE OF STEEL
Deck is stamped from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside with fewer sharp corners for reduced material buildup.
Significantly fewer welds on the deck shell to wear or break - it is stamped from a single sheet of steel rather than multiple fabrications. An anti-skid step on the deck provides easy machine mounting.
Extra reliability and long life with cast-iron blade spindle housings.
Higher blade tip speed than many competitors - 18,500 fpm (5,639 m/min) for more blade cuts per inch mowed.
A deep-deck design of 5.5 in. (14 cm) delivers excellent airflow so material can be processed quickly and efficiently.
The wider and higher discharge opening provides even clipping dispersal for an excellent finished appearance in all conditions.
Quick-release belt covers do not require tools or the removal of a ring clip; just lift one corner of the cover and rotate it slightly to remove.
A hole in the deck tab is provided for use of an optional ring clip for extra security, if desired.
This makes it quick and easy for you to clean out trash that may collect around the spindle sheave.
Deck has rectangular leading deck edge reinforcement and the rounded corners of the stamped deck help distribute impact stress to reduce the potential of damage when the mower contacts trees, rocks, curbs, and other fixed obstacles.
Dual-captured front and rear anti-scalp wheels provide deck flotation over even the toughest terrain.
Three 1-in. (2.5-cm), cold-forged spindles are heat-treated for strength without bulk and are supported by ball bearings, providing reliability and performance; spindle housings are ribbed cast iron providing both excellent strength and heat dissipation.
The trim edge of the deck is equipped with a bumper that provides great abrasion resistance to protect the machine and the property.
The front edge is raised above the blade plane to allow even cutting of tall grass and is reinforced with a square bar for durability. The front baffle has been redesigned to better manage airflow and control clippings.
Three spindle grease fittings are accessible from the top.
Blade overlap is 1.6 in. (40.6 mm), nearly 0.79 in. (20 mm) greater than previous decks, to reduce striping between blades.
Quick-change, cutting-height adjustment.
TWO SEAT CHOICES WITH ComfortGlide FORE/AFT SUSPENSION OFFER EXCEPTIONAL OPERATOR COMFORT
There are two seating options available for the E Series, both of which are factory installed. Each seat has the ComfortGlide fore/aft suspension system that gives superior ride comfort over uneven areas:
1. Deluxe comfort seat with armrests
2. Deluxe comfort seat with armrests and isolation
HEAVY-DUTY FRAME PROVIDES STRENGTH & DURABILITY
Heavy-duty, thick-gauge, steel channel mainframe for strength and durability
Cast I-beam caster arms to handle the beating and pounding professional mowers receive
Wide-open access for maintenance and cleaning
DURABLE HYDROSTATIC DRIVE TRAIN THAT DELIVERS BETTER COOLING & PROVIDES EASY ACCESS
The hydrostatic drive features two 13-cc (0.8-cu in.) unitized hydraulic pumps combined with commercial-grade, heavy-duty wheel motors into a single unit
One pump and one motor drive each wheel on the ZTrak E and M Series Mowers
Exceptional cooling in high-load conditions
Easy-to-check level and refill hydraulic oil
Opens up access under the seat
MICHELIN X TWEEL TURF AIRLESS RADIAL TIRE TECHNOLOGY FOR ZTRAK MOWERS ELIMINATES DOWNTIME AND REDUCES COST OF OPERATION
Mowing Performance Is Improved.
o Rutting is reduced because the Michelin X Tweel Turf has more support across the surface for improved flotation and better ground contact
o Unique energy transfer within the poly-resin spokes reduces the bounce associated with pneumatic tires
o Excellent curb climbing is possible due to the Michelin X Tweel Turf construction and flexibility
o More consistent cut quality is achieved because inconsistent tire pressure is eliminated
Uptime Is Improved.
o The exclusive technology eliminates downtime and associated cost due to flat or damaged tires
o Punctures and sidewall damage no longer result in downtime
Cost of Operation Is Reduced.
o Cost of repairs and maintenance is reduced. One single unit replaces the current tire, wheel, and valve assembly. There is no need for complex tire-mounting equipment
o No need to spend time checking and optimizing tire pressure
o The need to purchase and stock plug kits and spare tires is eliminated, particularly for professional landscape contractors and government agencies who normally stock them
o The tire tread will last up to three times longer than current pneumatic tires because automotive-grade rubber is used for the tread
MOWER IS EASY TO SERVICE WITH MANY ACCESSIBLE COMPONENTS
The design of the Z900 Series makes many service components reachable and easily accessible from the ground
Large, open engine compartment at the rear of the machine provides convenient servicing and directs engine heat away from the operator
EXTRA RELIABILITY AND LONG LIFE WITH CAST-IRON BLADE SPINDLE HOUSINGS
Extra reliability and long life with cast-iron blade spindle housings:
Superior impact strength with ductile cast-iron material
Gusseted design puts reinforcement where it is needed
Strength of cast iron protects against damage from blade impacts
Easy access grease fittings are mounted at the top of the spindle shafts for convenience
Grease pressure-relief valve minimizes seal damage from overfilling with grease and keeps debris from entering housing
Chance of deck shell damage is minimized with the 8-in. (20.3-cm) diameter housing and six mounting bolts that distribute loads and impacts
Ability to be reliably rebuilt is provided by use of cast iron
Similar models may be shown in addition to the featured model. Equipment may be shown with options.
Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate