Skip Nav

JOHN DEERE - Z315E Back

Request a Quote
Year :
2023
Condition :
New
Model Number :
Z315E

JOHN DEERE Z315E - Z300 SERIES ZTRAK MOWER WITH 48-IN. DECK

With comfortable seats, easy access storage, and large rear drive tires, the Z300 Series makes yard work a breeze. And thanks to the Accel Deep Mower Deck, optional MulchControl kits, and up to 7mph travel speed, it gets the job done fast so you can get the most out of your lawn.

FEATURES
Mow up to 2 acres
23 HP* (17 kW) V-Twin engine
48- and 54-in. (122- and 137 cm) forged Accel Deep Mower Decks available
20-inch (50.8 cm) high-back custom-tailored seat with arm rests
LED lights, floor mat, front bumper, rear hitch, covered storage come standard
3-year/200-hour bumper-to-bumper warranty

ADDITIONAL FEATURES
SMOOTH AND POWERFUL V-TWIN ENGINE
A 20-hp (14.9-kW) V-twin engine provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions:
V-twin cylinder design for greater torque, lower vibration, and improved sound quality
Full-pressure lubrication and cast-iron sleeves to extend engine life
Engine model 40EXi
Rear engine guard to protects the engine from damage

GET AN EVEN CUT WITH THE 42-IN. (107-CM) ACCEL DEEP (42A) MOWER DECK
The 42-in. (107-cm) Accel Deep Mower Deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds or in tall grass:
4.97-in. (12.6-cm) deep throughout the entire deck shell for optimum mowing, mulching, and bagging performance
Optional MulchControl system provides superior mulching performance and versatility
Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance
Mower deck suspended from the vehicle for a smooth and level cut
Adjustable mower wheels, positioned just above ground level, help reduce scalping
0.25-in. (6.4-mm) cut-height increments allow the mower to be set at the desired cut height
Compatible with efficient 6.5-bu (230-L) two-bag cut-and-throw material collection system

EXCELLENT CUT QUALITY
Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:
Reducing the amount of recutting enables more power to be used to cut incoming grass, which greatly improves mower capacity.
Helps maintain excellent cut quality at faster mowing speeds
Clean flow of material out of discharge area prevents cut material from interfering with cutting the incoming grass, making it possible for the blades to cut incoming material cleanly.
Even in mulching mode, cut evenness is improved compared to other designs because the additional depth allows for continuous circulation, optimal recutting, and an even distribution of clippings.

CLEANING A MOWER DECK, BOTH TOP AND BOTTOM, IS ONE OF THE MOST FREQUENT MAINTENANCE ACTIVITIES:
The flat-top design reduces places for material to build up and makes material that does collect easy to remove.
A wash port is provided to make cleaning the underside of the mower deck easy.
Hose connector is included with the mower deck.

MULCHCONTROL OPTION
The MulchControl system for the 42A Mower Deck is an optional field-installed attachment and makes mulching practical for many mowing situations because it not only does an excellent job of mulching, but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:
A beautiful looking lawn
Grass clippings not blown onto the operator, driveways, or flower beds
Less fertilizer use
Elimination of the effort needed to dispose of clippings

COMFORTABLE RIDE DELIVERED BY OPERATOR STATION WITH ADJUSTABLE CONTROLS AND SEAT POSITION
The operator station is designed for operator comfort and convenience when operating all controls:
Excellent visibility forward and to the trim side of the deck makes operation easy and comfortable for the operator.
Controls are color coded for easy identification.
Translucent fuel tank displays fuel level.
Twin-lever controls adjust, using cut-height pin/socket, for convenience and operator comfort.
A shock absorber dampens motion control lever movement to give smooth operation.

EASY TO FIND AND USE INSTRUMENTS AND CONTROLS
The motion-control levers can be adjusted to three different height settings and eleven different fore-aft settings:
Increased operator comfort
Adjustable for more precise control of the machine

On-board tracking adjustment from the operator seat is quick and easy. The included 13-mm wrench is used for adjusting tracking and the motion-control lever position.

The operator control panel is conveniently located and easy to use. The following instruments and controls are included:
Hour meter
Ignition switch
Power take-off (PTO) control
Engine speed/choke control
A choke position is built into the engine speed control (E-Series models).
A separate choke lever is used (M- and R- Series models).

MOWER DECK LIFT/CUT-HEIGHT ADJUSTMENT
Easily lift the mower deck using the foot lift pedal.
A cut-height preset ensures the deck returns to the correct position.
Mower deck cutting height adjusts from 1.25 to 4.5 in. (3 to 11 cm) in 0.25-in. (0.64-cm) increments for excellent cut quality and performance.
The foot-lift pedal also provides a convenient way to temporarily raise the mower deck over an obstruction while mowing.

GREAT APPEARANCE, RELIABILITY, AND PERFORMANCE DELIVERED BY A HEAVY-DUTY DESIGN
ZTrak Mowers are designed around a heavy-duty formed and welded steel frame for strength and reliability. Large front caster wheels and large rear drive wheels provide several operator benefits:
Smoother ride
Better slope performance
More operator comfort over uneven ground
Better traction

The operator platform is roomy and uncluttered for maximum comfort, and the controls are convenient to use:
Easy to get on and off the mower
Ample legroom for comfortable operation
Adjustable motion-control levers for height and position, enabling the operator to stay comfortable while using them
Color-coded and logically placed controls

EFFICIENCY AND DURABILITY FROM DUAL TRANSMISSIONS WITH LARGE, 1-IN. (2.5-CM) DIAMETER AXLES
Dual transmissions efficiently power the ZTrak mower forward and reverse and give steering capability:
Transmissions are set low in the vehicle for excellent hillside stability.
Hydro-Gear transmissions are reliable and durable.
Beefed-up 1-in. (2.5-cm) axles for greater strength
Maintenance-free unitized transmissions are sealed and have no hose connections to leak hydraulic fluid.

EASY REFUELING WITH A CONVENIENTLY LOCATED FUEL TANK
Fuel-fill opening is located low and angled for easy refueling.
Large, 2-in. (5.1-cm) fuel-fill opening reduces the chance of spilling when adding fuel.
Cap is tethered to the fuel tank to prevent the fuel cap from getting misplaced.

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate

Request a Quote
Year :
2023
Condition :
New
Model Number :
Z315E
Request Information
News

John Deere Spring Parts Sale Catalog 2023

Save Now on the John Deere Parts You Need for the Upcoming Spring Season Now thru February 27 2023 from Your Local John Deere Dealer Cross Implement
Read More

Make It Better | John Deere LED Rotary Beacon Low Profile RE596223

LED beacon light is available as a field installed attachment. The new design is shorter making it less susceptible to damage.
Read More

Make It Better | John Deere Foot Rest Upgrade 4R 7R 8R 9R BRE10471

Increase operator comfort and ergonomics with footrest retrofit kit. Complete kit includes all parts and hardware without requiring any drilling or welding for your 4R Sprayer 7R 8R 9R Tractor back to 2009.
Read More
X