JOHN DEERE - 1200H Back
1200H HYDRO BUNKER & FIELD RAKE
REACH A SMOOTH FINISH
Putting the finishing touches on a golf course bunker, a ball field infield or a new-course construction project requires a delicate touch and excellent maneuverability. To perform those jobs, John Deere has not one, but two fine options to help you complete the job. The 1200A is a gear-driven machine that set the standard for all bunker and field rakes when it was first introduced in 1995. And our 1200 Hydro gives you the excellent pulling and pushing power you expect from a hydrostatic machine.
Fuel efficiency at speeds up to 10 mph
Standard 72-inch rear rake enables rapid coverage
Adjustable seat and wide running boards
Stylish rear body
The hydrostatic 3WD system has variable speed for excellent pulling and pushing power
Raising the hinged rear fiberglass body cowling exposes the 16-hp*(11.9-kW), 479-cc air-cooled, overhead valve engine
High torque for pulling power
Fuel efficient for lower operating cost and extended operating range
3.9 gal (14.8 L) gas tank for long hours of operation with unleaded gasoline
Full pressure lubrication and oil filter for good reliability
Low vibration for long component life and operator comfort
HEAVY-DUTY AIR FILTER PROTECTS ENGINE IN TOUGH CONDITIONS
A heavy-duty air filter is standard equipment on the 1200A bunker and field rake. Featuring a cyclone design, this dual element filter can eject 90 percent to 95 percent of dust particles before they reach the paper element core. This reduces overall maintenance costs through less cleaning and replacement.
WIDE TIRES AND WHEELBASE
Wide high-flotation tires provide low ground compaction
All tires are 22x11.00x8 NHS
The 47-in. (119-cm) wheelbase enables a tight turning radius
OPERATOR'S PLATFORM DESIGNED FOR OPERATOR COMFORT
The operator's platform is designed for comfort, control, and high productivity
14-in. (35.56-cm) diameter steering wheel with a 10-to-1 gear ratio for easy and responsive steering
Adjustable fore and aft for improved comfort for large and small operators
Wide running boards for comfortable leg support of large and small operators alike
INSTRUMENTATION IS CONVENIENT AND EASY TO USE
Instruments and electronic controls are positioned for easy reach and visibility
Ignition switch and key start are mounted on the console for quick and easy starting.
Choke control for quicker cool weather starts is conveniently located on the console at left.
Standard rear and mid implement lift lever is located on the right side for easy access.
The forward and reverse foot pedals provide ease of identification and operation. The forward pedal is larger than the reverse pedal and provides good clearance for the operator's foot. This is the same two-pedal design used on the John Deere 2500A Riding Greens Mower.
* Engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to engine manufacturers website for additional information.
Any warranty may be limited to months/hours used and varies by model. See your dealer for details.
Similar models may be shown in addition to the featured model. Equipment may be shown with options.
Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate