JOHN DEERE - 220SL Back
JOHN DEERE 220 SL PRECISIONCUT GREENS MOWER
Some of the lightest mowers in their class, the SL PrecisionCut walk greens mowers, allow effortless turning, better engagement with the turf for a consistent cut, and straighter tracking. Well-engineered cutting unit geometry provides the cleanest cut with minimal impact to the grass plant.
SPEED LINK HEIGHT-OF-CUT SYSTEM ADJUSTS BOTH SIDES OF THE ROLLER AT THE SAME TIME
The ultimate in quick and accurate height-of-cut adjustments: The Speed Link height-of-cut adjustment system ties both sides of the front roller together, allowing technicians to make height-of-cut adjustments simply by adjusting one end of the roller.
How does this innovative system accomplish a one-point height-of-cut adjustment? It all starts with the worm gear drives in the front-roller castings. The worm gear system rotates via hex bolts on the side of the rear-roller castings, adjusting the roller up and down. Simply turn the gears by turning the hex adjuster on the side of the casting. Each full turn represents an adjustment of 0.001 in. (0.0254 mm). A diagram on the side of the casting tells which direction to turn the hex bolts to raise or lower the cutting height.
But that's not all. The true secret to the system is the connecting rod that ties the worm gear systems for the roller tower together. With the connecting rod in place, turning the height-of-cut adjuster on one side automatically turns the other side by the exact same amount. This allows for adjusting the height of cut from one end of the roller, making adjustments not only quick, but with stunning precision.
The Speed Link connecting rod is also spring loaded, so it can be easily removed should both towers need to be adjusted independently. Once the roller is paralleled to the front roller when the cutting unit is initially set up, the Speed Link system takes over and moves each side of the roller by the same amount for a quick one-point height-of-cut adjustment. The preferred way to adjust the cutting unit is with a variable-speed electric or air drill with a 16-mm socket attached. A drill makes the adjustment even easier by rotating the tower quickly, making height-of-cut changes a breeze. And the connecting rod makes ensures the other side turns just as fast and just as accurately.
Optional brushes help stand the grass up for a cleaner cut and improved striping appearance
Consistent effective height of cutA prism tells the story
Roller attaching system for quick removal and installation of the front roller for changing conditions
Narrow front-roller-to-rear-drum distance for contour following and cleanup-pass cut quality
Grass-catcher systemFixed to plane of reel for maximum performance in severe undulations
Integrated gear reduction yields same quality of cut regardless of operator mowing speed
Quiet, smooth gas engine
Rubber isolators for reduced vibration
Dual traction rolls for straight tracking and excellent maneuverability
Sealed external differential provides even power distribution for drive rolls and reel
Gear-driven, counter-rotating rotary brush and Greens Tender Conditioner for grain and thatch control
High-strength steel reelsLong life, reduced maintenance, and superior toughness
Special alloys ensure bedknives are tough and resistant
Wide range of roller options, including grooved, smooth, and spiral rollers
Easily accessible bedknife-to-reel adjustment
Greaseable reel and roller bearings purge unwanted contaminants
14-blade reel lowers frequency of clip
Larger, 63.5-mm (2.5-in.) front grooved disc roller compatible with fairway tender conditioner (FTC) and Greens Tender conditioner attachment for 55.9-cm (22-in.) Quick-Adjust 5 (QA5) reel cutting units
* The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturers web site for additional information.
Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate