JOHN DEERE - 220 E-CUT HYBRID Back

JOHN DEERE 220 E-CUT HYBRID GREENS MOWER

Available in both 18- and 22-inch widths of cut, our 180 and 220 E-Cut Hybrid walk greens mowers offer an unparalleled ability to follow contours and steer around the cleanup pass. Thanks to the signature ball joint mounting system, the cutting unit can rotate in any direction.

BALL-JOINT MOUNTING SYSTEM FOR CONTOUR FOLLOWING IN ALL DIRECTIONS, EVEN STEERING
The primary purpose of walk greens mowers with independent cutting units is to follow contours. It is in this area the 180 E-Cut and 220 E-Cut Hybrid Walk Greens Mowers truly excel.

ELECTRIC REEL-DRIVE SYSTEM FOR EXCELLENT CONTOUR FOLLOWING AND A PREMIUM QUALITY OF CUT
The benefits of hybrid technology are numerous. The 2500E E-Cut Hybrid Riding Greens Mowers and E-Cut Hybrid fairway mowers are proof of that. So why not move that same technology to the walk-behind greens mowers? With the 180 E-Cut and 220 E-Cut Hybrid Walk Greens Mowers, hybrid technology is now at your disposal on even the most undulating of greens. In the case of walk greens mowers, hybrid technology provides more benefits than just noise reduction, fuel savings, and the elimination of any hydraulic leak points. With the 180 E-Cut and 220 E-Cut Hybrid Walk Greens Mower platform, the hybrid technology also allows a truly independent cutting unit that quickly reacts to contours, not only allowing the cutting unit to pivot laterally and fore-aft, but also to turn side to side for mowing cleanup passes.

ADJUSTABLE FREQUENCY OF CLIP TO MEET TURF CONDITIONS
The buzz in the industry is all about frequency of clip. But what exactly is it? Frequency of clip is defined as the distance traveled between consecutive cuts. In other words, it is how far the machine moves from the time one blade passes across the bedknife until the next blade passes. The lower the frequency of clip, the less distance that is traveled until the next blade passes.

STANDARD ONBOARD BACKLAPPING FOR EASY REEL MAINTENANCE
A significant benefit to the electric reel-drive system is that it is very simple to change the direction of the motor, which allows the cutting unit to spin either forward for mowing or backward for backlapping. The 180 E-Cut and 220 E-Cut Hybrid Walk Greens Mowers can be backlapped without needing any external devices to drive the reel backward. It can do it all by itself with a simple toggle switch located on the rear left-hand side of the machine.

STANDARD DIAGNOSTIC LIGHT FOR QUICK AND EASY TROUBLESHOOTING
For quick and easy troubleshooting should an issue arise, a diagnostic light is located on top of the handlebar cover. If the electrical system sees a problem, a diagnostic code flashes through the indicator light. The code is repeated until the power take-off (PTO) switch is cycled off and on again, or the engine is shut off and turned on again. When a code is discovered, consult the technical manual for additional troubleshooting information. If a continuing condition exists, the diagnostic code displays again when the engine is started, until the original condition is corrected.

GRASS-CATCHER SYSTEM FIXED TO THE PLANE OF THE REEL FOR MAXIMUM PERFORMANCE IN SEVERE UNDULATIONS
The direct-mounting grass catcher is designed to retain clippings by slowing down the air volume and routing it out of the catcher while keeping the clippings in. Molded-in grooves and mounting brackets make it easy to remove and replace the catcher. The catcher is made of lightweight polyethylene material that resists corrosion and cracking, reduces vibration, and is easy to use. Overlap marks for lining up to previous pass are molded into the top of the catcher for increased productivity and straightly mowed passes.

DUAL TRACTION ROLLS FOR STRAIGHT TRACKING AND EXCELLENT MANEUVERABILITY
The dual traction rolls for the rear drum are powered by an external differential drive. This design provides equal power to both rolls for the straightest possible tracking. The external differential drive and split drum work together to allow minimal turning efforts and excellent maneuverability when making turns and mowing cleanup passes.

QUICK-ADJUST 5 (QA5) 14-BLADE CUTTING UNIT LOWERS FREQUENCY OF CLIP (FOC)
Using the QA5 14-blade cutting unit option on Greens Mowers will lower the FOC and also provide a clean, smooth cut. It can increase the playability of the putting surface and greens speed.

LARGER, 63.5-MM (2.5-IN.) FRONT GROOVED DISC ROLLER COMPATIBLE WITH FAIRWAY TENDER CONDITIONER (FTC) AND GREENS TENDER CONDITIONER ATTACHMENT FOR 55.9-CM (22-IN.) QUICK-ADJUST 5 (QA5) REEL CUTTING UNITS
The grooved disc roller can be used with 55.9-cm (22-in.) QA5 cutting units, in combination with the Greens Tender Conditioner and FTC, to provide additional roller options for fairway, tees, and approach areas. The increased diameter improves the durability over smaller rollers, and it features hardened discs for improved wear which retains spring tension for reduced maintenance, making it an ideal roller for fairway, tee, and approach mowing.

* The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturers web site for additional information.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate