JOHN DEERE - 7200A Back
JOHN DEERE 7200A PRECISION CUT MOWER
This mower changes the way trim and surrounds areas are maintained. The 7200A is Final Tier 4 compliant without sacrificing horsepower. It features the exclusive width on demand system, right at the operators fingertips. Operators can change the width of cut on the go with the simple toggle of a switch. It also has the Reach Trimming System, which allows you to extend either the front left or front right deck 15 in. beyond the outside edge of the tire, allowing you to trim around bunkers and other areas.
TECHCONTROL DISPLAY MAXIMIZES PERFORMANCE AND UPTIME BY ALLOWING MORE CONTROL IN OPERATION AND DIAGNOSTICS
TechControl display maximizes performance and uptime by allowing more control in operation and diagnostics. The Display maximizes performance and uptime by allowing more control in operation and diagnostics Passcode-protected TechControl display enables quickly setting or changing mowing speed, turning speed, or transport speed to limit variations in performance by different operators.
EHYDRO HYDROSTATIC PUMP AND LARGE-CAPACITY WHEEL MOTORS FOR SERIOUS HILL-CLIMBING CAPABILITIES
The eHydro traction pump and wheel motors in the new A-model take performance, traction, and operation to the next level. The new system was designed to take on the most challenging course conditions. The traction drive pump flow increased 35 percent and the wheel motors increase 17 percent in displacement over prior models. These increases to the traction system make the A-models ideal for undulating terrain providing superior performance and traction out on the course. The new traction system in the A-models is driven by a servo-controlled hydrostatic pump. The control of the pump is no longer mechanical linkages, but instead is electronic.
WIDTH ON DEMANDMATCH THE CONDITIONS WITH THE TOUCH OF A BUTTON
Featuring both a 68-in. (172.72-cm) to 72-in. (182.89-cm) width of cut for 26-in. (66.04-cm) Quick Adjust 7 (QA7) cutting units and an 80-in. (203.20 cm) to 84-in. (213.36 cm) width of cut for 30-in. (76.20 cm) QA7 cutting units that can be changed with the touch of a button, the 7200A PrecisionCut Trim and Surrounds Mower ensures that all grass in its path is cut in both flat and undulating conditions.
FINAL TIER 4 (FT4) DIESEL ENGINE OFFERS PLENTY OF POWER FOR MOWING
Power starts with the engine, and the 7200A PrecisionCut Trim and Surrounds Mower has an abundance of power and performance with this FT 4 solution. The 3-cylinder 21.2 hp (15.8kW) at 2600 rpm diesel engine has a strong reputation for power and performance. This engine provides plenty of power for climbing hills without sacrificing power to run the Quick Adjust (QA7) 26-in. (66-cm) or 30-in. (76-cm) cutting units and attachments.
MAXIMUM CONTOUR FOLLOWING FOR A PREMIUM QUALITY OF CUT
One of the primary challenges for rough mowers is the ability to follow ground contours in a variety of terrains, from mounds to sidehills to bunkers and more. When judging cut quality, following the terrain to promote a consistent cutting height is of significant importance. The challenge has been met with the 7200A PrecisionCut Trim and Surrounds Mower. By angling the operator platform, the front cutting units have even more clearance to maneuver when following undulating terrain. The cutting units also have plenty of downward travel to follow contours when cresting mounds and undulations. For the rear cutting unit, there is plenty of clearance between the cutting unit and frame to keep the cutting unit from high centering on an undulation. This cutting unit also features plenty of downward travel to closely match the terrain being followed.
REACH TRIMMING SYSTEMSHIFT OUT TO TRIM AROUND BUNKERS AND OTHER HARD-TO-REACH PLACES
Shift out to trim around bunkers and other hard-to-reach places. With the Reach Trimming System, one of the front cutting units can be shifted outward to extend the cutting unit beyond the outer edge of the tire for trimming. Shifting only the cutting unit deck helps keep the machine's center of gravity more consistent, maintaining the machine's overall stability.
GRIP ALL-WHEEL DRIVE TRACTION SYSTEM MOVES FLOW FROM WHEELS THAT SLIP TO THOSE THAT GRIP
Hill-climbing power is essential with any golf course mower, and this is one area where the A-model PrecisionCut and TerrainCut Trim and Surrounds Mowers truly excel. A powerful diesel engine supplies power to the system. Combine that with a new larger eHydro and wheel motors the GRIP all-wheel drive traction system, and the A-Model is one powerful hill-climbing machine. The new traction drive delivers 35 percent more flow from the hydrostatic pump and 17 percent more wheel torque than previous models to deliver the hill-climbing performance expected with a trim and surrounds mower.
LOADMATCH ELECTRONIC SETTING COMPENSATES SPEED OF MACHINE TO KEEP POWER TO THE CUTTING UNITS TO MAINTAIN CUT QUALITY
LoadMatch electronic setting compensates speed of machine to keep power to the cutting units to maintain cut quality. LoadMatch is an electronic setting through the TechControl display that allows managers more control of the machine and how it is operated when out on the course.
DOUBLE-ACTING, DUAL-ROD HYDRAULIC STEERING CYLINDER FOR LINES AS STRAIGHT AS ON GREENS AND FAIRWAYS
Using the same technology as incorporated on other PrecisionCut, E-Cut Hybrid, and TerrainCut mowers, the 7200A PrecisionCut Trim and Surrounds Mower produces high-quality straight lines through its unique steering system.
* The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturers web site for additional information.
Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate