JOHN DEERE - S120 Back
JOHN DEERE S120 - 100 SERIES LAWN TRACTOR
Built in Greeneville, TN, the 100 Series is designed to make yard work simple. With affordable prices, comfortable designs, and a bumper-to-bumper warranty1, it lets you focus on the real reason you have a lawn in the first place to make memories.
POWERFUL V-TWIN ENGINE FEATURES FULL-PRESSURE LUBRICATION FOR DEPENDABILITY AND LONG LIFE
V-twin cylinder design for greater torque, lower vibration, and improved sound quality
Electronic ignition for fast starts
Spring-return feature to ensure the operator will not mistakenly leave the throttle lever in the choke position
Cast-iron cylinder liner for long engine life
Overhead valves for excellent power and fuel economy
Full-pressure lubrication and oil filter for cleaner oil, prolonging engine life and extending the time between oil changes
More effective when operating the tractor on an incline
The capacity is 2.4 U.S. gal. (9.1 L).
The fuel filler opening is conveniently located under the seat.
Filling the tank without spilling is easy.
A tethered fuel tank cap is more convenient.
The sealed fuel cap helps keep vapors inside the tank.
FRAME MADE OF FULL-LENGTH WELDED STEEL FOR RELIABILITY
The solid one-piece frame is constructed of 12-gauge, 0.105-in. (2.66-mm) steel:
Full-length, robotically welded frame design has high-strength steel rails for added strength and long life.
One-piece, steel fender deck is bolted to the frame.
CAST-IRON FRONT AXLE WILL NOT BEND
The front axle is constructed of solid cast iron that will not bend
Automotive-like steering system with sector and pinion steering gears and single drag link with a tie rod provides a very strong, low-effort, and tight-turning system.
Three grease fittings, on both steering spindles and center pivot, allow for regular lubrication to help maintain easy steering and minimize wear.
Large, 0.75-in. (1.9-cm) diameter wheel spindles provide excellent durability.
CARGO MOUNT SYSTEM MAKES INSTALLATION OF REAR BAGGER AND OTHER ATTACHMENTS EASY
The CargO Mount system is a combination of front- and rear-mounting points providing convenient and easy installation of the sun canopy, rear bagger, and other attachments.
HYDROSTATIC TRANSMISSION GIVES AN INFINITE CHOICE OF GROUND SPEEDS
Two-pedal speed/direction controls
Forward speed control pedal in use
A KANZAKI TUFF TORQ HYDROSTATIC TRANSMISSION GIVES AN INFINITE CHOICE OF SPEEDS AND MAKES CHANGING THE DIRECTION OF TRAVEL EASY. SIDE-BY-SIDE FOOT PEDALS CONTROL THE SPEED AND DIRECTION OF TRAVEL
Automotive-type accelerator controls ensure easy operation.
Operator can change direction without lifting foot off the platform.
Large pedal surface gives superior operator comfort.
APPROPRIATE TRANSMISSIONS ARE USED IN EACH MODEL, DEPENDING ON REAR TIRE SIZE AND TRACTOR PERFORMANCE REQUIREMENTS, TO ENSURE EXCELLENT PERFORMANCE AND RELIABILITY
Tuff Torq TLT200 S100, S110, S120, S130, S140, and S160
THE OPERATOR STATION IS DESIGNED FOR OPERATOR COMFORT AND EASY OPERATION
Controls are positioned where they are easy to reach and use to control the tractor.
The steering wheel is positioned and angled to give the operator plenty of room and steering comfort.
The seat is positioned to provide the most comfortable operator position.
CONTROLS ARE EASY TO SEE AND USE
Large, three-spoke steering wheel for greater operator comfort and control
Ignition switch is on the dash for starting ease
WIDE FOOTREST AREAS WITH NON-SLIP, ANTI-VIBRATION FLOOR MATS ARE PROVIDED FOR OPERATOR COMFORT
The wide footrest makes it easier to step over the mower deck while entering or exiting the seat.
Debris-removing channels help keep the footrest area clean and dry.
OPERATOR COMFORT IS ENHANCED WITH A 15-IN. (38-CM) HIGH-BACK, TWO-PIECE SEAT WITH AN OPEN BACK
The open-back seat design keeps the operator cooler
Especially helpful when operating the tractor for extended periods of time
Easily adjusted forward or rearward while in the seat
Seat travel of 5.5 in. (14 cm) and 10 different positions to adjust for operator height
Two long seat springs give plenty of seat travel to smooth out the ride, keeping the operator comfortable while operating the tractor.
The seat can be tilted forward for protection from the elements and to provide easy access to the fuel tank.
Storage compartment and beverage holder, located on the right-side fender, are conveniently located and easy to use.
NOTE: A storage compartment cover is standard on S120, S130, S160, S170, and S180 Tractors and optional on the S100, S110, and S140.
Rear bagger 2-bag, 6.5 bu | 229 L
Mulching system-Mulch cover or high-performing plug-
Front blade 46 in | 116.8 cm
Snow blower-Two-stage, 44 in. | 111.8 cm
Sprayer Tow-behind, 15 U.S. gal. | 56.8 L Mounted, 15 U.S. gal. | Tow-behind only, 25 U.S. gal. | 94.6L
Spreader Tow-behind only, 125-175 lb | 57.7-80 kg
Styled front bumper
Weather protection-Weather enclosure
Bucket holder- single bucket
Grass striping-Lawn striping kit
Notes-Molded-in color material reduces sound, will not rust or dent, Durable primer and powder paint finish, Full-length welded steel frame
Warranty-2 year/120 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model.
Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less.
Similar models may be shown in addition to the featured model. Equipment may be shown with options.
Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate