DEERE - 345G LC Back
DEERE 345G LCMID-SIZE EXCAVATORS
John Deere mid-size excavators will accelerate your profitability and productivity. With Powerwise Plus technology available for select models, these mid-size machines provide on-demand power when you need it. Our hydraulic excavators range from 16,500-90,000 lbs delivering mid-size might into any job.
With special features such as reduced-tail-swing, grade management options, and super-long front options theres an excavator that fits your specific worksite needs. Move effortlessly and take control with the hydraulic single-pedal propel system and short-throw pilot levers with smooth fingertip control. No matter the job, our mid-size excavators will work smarter and harder while you can take a load off.
Whether your work is street repair, underground utilities, site development, or landscaping, the 345G LC Excavator will revitalize your operation as you rejuvenate your community. Meeting customer demand for a larger reduced-tail-swing excavator, the 345G LC improves your capability to work in congested areas or around traffic.
COMES OUT FIGHTING
The 345G LC Excavator performs best with its back against the wall. Its reduced-tail-swing design helps you maximize productivity when youre between a rock and a hard place.
GO WITH THE FLOW
Three-pump hydraulic system delivers superb hydraulic flow. With one pump dedicated to the swing circuit, hydraulic flow is never compromised for fast cycle times and smooth multifunction performance.
EXPLORE YOUR OPTIONS
Choose from a variety of arm lengths, buckets, high-flow auxiliary hydraulic packages, and numerous other options. The 345G LC coupler is compatible with the attachments available for the 300G LC, to help maximize fleet utility.
PUT YOUR MIND AT EASE
Redesigned pistons and fuel injectors enable the aftertreatment of the powerful 249-hp engine to meet EPA Final Tier 4/EU Stage IV emissions without a diesel particulate filter (DPF). High-efficiency combustion means that no fuel is left over, no damaging soot is created, and no components need to be replaced to minimize maintenance requirements and worries.
TIGHT JOBSITES AND DEADLINES? HELP HAD ARRIVED.
The 345G LC offers a larger alternative to the popular 245G LC to help you complete big projects more efficiently.
This close-quarters specialist delivers more reach, lift capacity, digging depth, breakout force, swing torque, and bucket capacity than previous models.
THE TOUGH GET GOING
When the going gets tough, simply press the power-boost button on the right-hand control and muscle through.
WONT CRAMP YOUR STYLE. LESS CONFINED, MORE REFINED.
A smaller back end doesnt mean a cramped workspace. The 345G LC is a reduced-tail-swing machine boasting a full-size cab. Step inside and make yourself at home.
READY TO WORK
Operators will appreciate the fabric-covered high-back seat and generous legroom in the spacious, well-appointed cab. As always, excellent visibility, low-effort joysticks, a highly efficient HVAC system, and numerous other amenities provide what you need to do your best work.
Ergonomically correct short-throw pilot levers provide predictable, smooth control with minimal movement or effort. Push buttons on the right joystick allow fingertip control of auxiliary hydraulic flow for operating attachments.
SEE MORE, DO MORE
Hood design enables optimal visibility to the sides and rear. Standard rearview camera expands the view even more, showing the action behind the machine on the front monitor.
LIGHT IT UP
Optional cab and right-side boom lights provide extra illumination to extend your workday beyond daylight hours.
PUT MORE PRODUCTIVITY ON SPEED DIAL
The refined monitor employs a rotary control that makes it quick and easy to tap into an abundance of performance and convenience functions and features.
Automatic belt-tension device
Batteries (2 12 volt)
Coolant recovery tank
Dual-element dry-type air filter
Electronic engine control
Enclosed fan guard (conforms to SAE J1308)
Engine coolant to 37 deg. C (34 deg. F)
Fuel filter with water separator
Full-flow oil filter
Turbocharger with charge air cooler
Cool-on-demand hydraulic-driven fan
500-hour engine-oil-change interval
70% (35 deg.) off-level capability
Programmable auto shutdown
Reduced-drift valve for boom down, arm in
Auxiliary hydraulic valve section
Spring-applied, hydraulically released automatic swing brake
Auxiliary hydraulic-flow adjustments through monitor
Auto power lift
5,000-hour hydraulic-oil-change interval
Planetary drive with axial piston motors
Propel motor shields
Spring-applied, hydraulically released automatic propel brake
Track guides, front idler and center
2-speed propel with automatic shift
Upper carrier roller (2)
Sealed and lubricated track chain
Right-hand and left-hand mirrors
Vandal locks with ignition key: Cab door / Service doors / Toolbox
Debris-screening side panel
Remote-mounted engine oil and fuel filters
Centralized lubrication system
Dirt seals on all bucket pins
Less boom and arm
Reinforced resin thrust plates
Tungsten carbide thermal coating on arm-to-bucket joint
Adjustable independent control positions (levers-to-seat, seat-to-pedals)
Auto climate control/air conditioner with heater and pressurizer
Built-in operators manual storage compartment and manual
Cell-phone power outlet, 12 volt, 60 watt, 5 amp
Deluxe suspension cloth seat with 100-mm (4 in.) adjustable armrests
Front windshield wiper with intermittent speeds
Gauges (illuminated): Diesel Exhaust Fluid (DEF) / Engine coolant / Fuel
Hour meter, electric
Hydraulic shutoff lever, all controls
Hydraulic warm-up control
Large cup holder
Machine Information Center (MIC)
Mode selectors (illuminated): Power modes (3) / Travel modes (2 with automatic shift) / Work mode (1)
Multifunction, color LCD monitor with: Diagnostic capability / Multiple-language capabilities / Maintenance tracking / Clock / System monitoring with alarm features: Auto-idle indicator, engine air cleaner restriction indicator light, engine check, engine coolant temperature indicator light with audible alarm, engine oil pressure indicator light with audible alarm, low-alternator-charge indicator light, low-fuel indicator light, fault-code alert indicator, fuel-rate display, wiper-mode indicator, work-lights-on indicator, and work-mode indicator
Motion alarm with cancel switch (conforms to SAE J994)
Power-boost switch on right console lever
Auxiliary hydraulic control switches in right console lever
SAE 2-lever control pattern
Seat belt, 76 mm (3 in.), non-retractable
Transparent tinted overhead hatch
Hot/cold beverage compartment
Blade-type multi-fused circuits
Positive-terminal battery covers
Work lights: 3 halogen (1 mounted on frame, 2 mounted on boom)
OPTIONAL OR SPECIAL EQUIPMENT
Severe-duty fuel filter
Hydraulic filter restriction indicator kit
Single-pedal propel control
Control pattern change valve
Triple semi-grouser shoes, 800 mm (32 in.)
Arm, 3.11 m (10 ft. 2 in.)
Arm, 3.76 m (12 ft. 4 in.)
Buckets: Heavy duty / Heavy-duty high capacity / Side cutters and teeth
Protection screens for cab front, rear, and side
Window vandal-protection covers
Left and right side-view cameras with additional monitor
2 lights on front of cab / 1 rear cab light
Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate