Skip Nav

DEERE - 75G Back

Request a Quote
Year :
2023
Condition :
New
Model Number :
75G

DEERE 75GMID-SIZE EXCAVATORS

MID-SIZE EXCAVATORS
John Deere mid-size excavators will accelerate your profitability and productivity. With Powerwise Plus technology available for select models, these mid-size machines provide on-demand power when you need it. Our hydraulic excavators range from 16,500-90,000 lbs delivering mid-size might into any job.

With special features such as reduced-tail-swing, grade management options, and super-long front options theres an excavator that fits your specific worksite needs. Move effortlessly and take control with the hydraulic single-pedal propel system and short-throw pilot levers with smooth fingertip control. No matter the job, our mid-size excavators will work smarter and harder while you can take a load off.

FIT IN MORE PRODUCTIVITY
Neither too big nor too small, these right-size excavators are the perfect solution for a wide variety of tasks. Their reduced-tail-swing configurations provide extra flexibility, enabling them to maneuver nimbly and work efficiently in and around congested conditions. Whats more, the 85G comes equipped with the extra advantage of an independent-swing boom that lets it work even closer to curbs, parallel to structures, or in the midst of traffic. Inside their spacious, comfortable cabs, easy-to-navigate enhanced LCD monitors let operators easily dial-in a wealth of machine info and functionality. Of course, these two meet EPA Final Tier 4 (FT4)/EU Stage IV regulations, so theyre a perfect fit for your equipment fleet for years to come.

ALL IN THE FAMILY
When we designed the 75G and 85G, we combined the agility and adaptability of our smaller compact models with the power and wide-ranging capabilities of their large excavator siblings all with the flexibility of your fleet in mind.

HAVE IT YOUR WAY
Undercarriage options include rubber tracks or sealed and lubricated chain with rubber pads or steel semi-grousers from 18- to 24-inches wide. Numerous arm and bucket options let you spec the right excavator for the way you work.

MASS TRANSIT
These go-to taskmasters transport easily between jobsites, making them ideal for dig-and-go jobs.

BLADE RUNNER
The standard blade enables the 75G and 85G to capably backfill and clean up. It also increases agility and stability on slopes.

AT HOME IN THE CAB
Spacious operator stations with large entryways and expansive sight lines help redefine comfort and convenience.

AUXILIARY FORCES
Factory-installed standard auxiliary hydraulics with proportional control boost jobsite productivity. High-pressure, high-flow auxiliary hydraulic packages power the addition of a hydraulic hammer or a wide range of over 100 John Deere attachments.

REMOVE OBSTACLES WITHOUT MOVING THEM
Equipped with the same proven load-sensing open-center hydraulic system as our other excavators, the pinpoint metering of the 75G and 85G delivers smooth-as-silk control. Together with their reduced-tail-swing configurations, they provide the finesse and footwork to keep jobsite obstacles from becoming barriers. Two power modes, plus an available control-pattern selector, easily adapt to changing job demands and operator preferences.

TIGHTEN UP
Why let obstacles dictate the way you work? The 85Gs independent swing boom lets you get in tight and even dig parallel to structures

WHEN THE RUBBER MEETS THE ROAD
Optional rubber track pads or heavy-duty rubber belts let these excavators set up and work on paved surfaces and even cross curbs without doing damage.

PRECISION MATTERS
For work that requires extra finesse, short-throw low-effort controls, exceptional metering, and smooth multifunction operation give the precision you need.

SHIFT INTO GEAR
Two-speed propel with AutoShift helps speed machine moves and maximize maneuverability.

MODES OF OPERATION
Engine performance and hydraulic flow are optimally balanced for predictable operation. Two productivity modes allow you to choose the digging style that fits the job. Power delivers a balance of speed and fuel economy for normal operation. Economy reduces top speed and helps save fuel.

PUT MORE PRODUCTIVITY ON SPEED DIAL
In the 75G and 85G, its easy for operators to dial things up. The refined monitor employs a rotary control to quickly tap into an abundance of performance and convenience functions and features. Operators will also appreciate the comfortable fabric-covered adjustable suspension seat and ample legroom in the spacious, well-appointed cab. Expansive all-around visibility, low-effort joysticks, a highly efficient HVAC system, and numerous other amenities offer what your operators need to focus on their work.

TAKE IT ON.
Just like you, our 75G and 85G Excavators dont quit. These dependable workers deliver rugged reliability, with job-proven digging structures and hydraulic, electrical, and undercarriage components. Highly efficient cooling systems keep things running cool, even in high altitudes or harsh environments. Other durability-enhancing extras include tungsten carbide-coated wear surfaces and oil-impregnated bushings. When you know how theyre built, youll see how tough they are.

STRESS MANAGEMENT
A John Deere feature, three welded bulkheads within the boom resist torsional stress.

RUGGED REINFORCEMENT
Rigid, reinforced D-channel side frames resist impacts, maximizing cab and component protection.

COAT OF ARMS
Tungsten-carbide coating creates an extremely wear-resistant surface to protect the all-important bucket-to-arm joint.

TOUGH ENOUGH
Box-section track frames, thick-plate single-sheet mainframe, and large swing bearing deliver rock-solid durability. Strong shields deflect material and impacts, protecting the blade cylinder and propel motors.

FAN APPEAL
Viscous fan continuously adjusts speed as necessary for effective cooling. Helps reduce noise and fuel consumption, too.

WRAP IT UP
Wear-resistant hoses are routed, secured, and guarded for exceptional durability. Cordura covering and wire wrapping adds an extra degree of protection to exposed hoses. O-ring face-seal couplers virtually eliminate leaks.

UNDERNEATH IT ALL
Large idlers, rollers, and strutted links in the sealed and lubricated undercarriage deliver reliable performance. Optional heavy-duty rubber track pads provide the long-term durability of a steel undercarriage, yet are easy on hard surfaces such as asphalt or concrete.

STANDARD EQUIPMENT
ENGINE
Auto-idle system
Batteries (2 12 volt)
Coolant recovery tank
Single-element air filter
Electronic engine control
Enclosed fan guard (conforms to SAE J1308)
Engine coolant to 37 deg. C (34 deg. F)
Fuel filter with water separator
Full-flow oil filter
Radiator and oil cooler with dust-protective net
Glow-plug start aid
500-hour engine oil-change interval
70% (35 deg.) off-level capacity
Isolation mounted

HYDRAULIC SYSTEM
Reduced-drift valve for boom down, arm in
Auxiliary hydraulic valve section
Spring-applied, hydraulically released automatic swing brake
5,000-hour hydraulic-oil-change interval
Auxiliary hydraulics
Control pattern-change valve

UNDERCARRIAGE
Planetary drive with axial piston motors
Propel motor shields
Spring-applied, hydraulically released automatic propel brake
2-speed propel with automatic shift
Upper carrier roller (1)
Sealed and lubricated track chain
Undercarriage with blade

UPPERSTRUCTURE
Counterweight, 1305 kg (2,877 lb.)(75G)
Counterweight, 1408 kg (3,104 lb.) (85G)
Right- and left-hand mirrors
Vandal locks with ignition key: Cab door / Engine hood / Fuel cap / Service doors
Remote-mounted fuel filters

FRONT ATTACHMENTS
Centralized lubrication system
Dirt seals on all bucket pins
Oil-impregnated bushings
Reinforced resin thrust plates
Tungsten carbide thermal coating on arm-to-bucket joint
Arm, 2.12 m (6 ft. 11 in.)

OPERATORS STATION
Meets ISO 12117-2 for ROPS
Adjustable independent control positions (seat-to-pedals)
AM/FM radio
Auto climate control/air conditioner with heater and pressurizer
Built-in operators manual storage compartment and manual
Cell-phone power outlet, 12 volt, 60 watt, 5 amp
Coat hook
Deluxe cloth suspension seat with adjustable armrests
Floor mat
Front windshield wiper with intermittent speeds
Gauges (illuminated): Engine coolant / Fuel
Horn, electric
Hour meter, electric
Hydraulic shutoff lever, all controls
Hydraulic warm-up control
Interior light
Large cup holder
Machine Information Center (MIC)
Mode selectors (illuminated): Power modes (2) / Travel modes (2 with automatic shift) / Work mode (1)
Multifunction, color LCD monitor with: Diagnostic capability / Multiple-language capabilities / Maintenance tracking / Clock / System monitoring with alarm features: Auto-idle indicator, engine air cleaner restriction indicator light, engine check, engine coolant temperature indicator light with audible alarm, engine oil pressure indicator light with audible alarm, low-alternator-charge indicator light, low-fuel indicator light, fault-code alert indicator, fuel-rate display, wiper-mode indicator, work-lights-on indicator, and work-mode indicator
Motion alarm with cancel switch (conforms to SAE J994)
Auxiliary hydraulic control switches in right console lever
SAE 2-lever control pattern
Seat belt, 51 mm (2 in.), retractable
Tinted glass
Transparent tinted overhead hatch (75G)
Transparent tinted overhead window (85G)
Hot/cold beverage compartment

ELECTRICAL
50-amp alternator
Blade-type multi-fused circuits
Positive-terminal battery covers

LIGHTS
Work lights: Halogen / 1 mounted on boom / 1 mounted on frame

OPTIONAL OR SPECIAL EQUIPMENT
HYDRAULIC SYSTEM
Hydraulic filter restriction indicator kit
Load-lowering control device
Single-pedal propel control

UPPERSTRUCTURE
Triple semi-grouser shoes, 450 mm (18 in.)
Triple semi-grouser shoes, 600 mm (24 in.)
Rubber crawler pads, 450 mm (18 in.)
Rubber belt, continuous, 450 mm (18 in.)

FRONT ATTACHMENTS
Attachment quick-couplers
Buckets: Ditching / Heavy duty / Heavy-duty high capacity / Side cutters and teeth

OPERATORS STATION
Seat belt, 76 mm (3 in.), non-retractable
Protection screens for cab front, rear, and side
Window vandal-protection covers (75G)

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate

Request a Quote
Year :
2023
Condition :
New
Model Number :
75G
Request Information
News

Make It Better | John Deere LED Rotary Beacon Low Profile RE596223

LED beacon light is available as a field installed attachment. The new design is shorter making it less susceptible to damage.
Read More

Make It Better | John Deere Foot Rest Upgrade 4R 7R 8R 9R BRE10471

Increase operator comfort and ergonomics with footrest retrofit kit. Complete kit includes all parts and hardware without requiring any drilling or welding for your 4R Sprayer 7R 8R 9R Tractor back to 2009.
Read More

Save 12% PreSeason Oil & Filter Sale

Save Now on John Deere Oil & Filters with our PreSeason Savings from Cross Implement Your Local John Deere Dealer Serving You From Central Illinois
Read More
X