JOHN DEERE - 3710 Back
JOHN DEERE MOLDBOARD PLOW 3710
STRENGTH, CLEARANCE AND PERFORMANCE
With the 3710 Drawn Plow, the 8x8in. (20.3x20.3-cm) mainframes on both rigid and flex models let you bust through the toughest fields. They also help your plow maintain a consistent depth and reduce bounce during transport.
Move nimbly over uneven terrain. The 3710 Drawn Flex Plows mainframe is hinged in the middle, allowing you to move over uneven terrain without gouging or scalping contours and low spots.
Easy to steer. The two-piece mainframe gives you one-piece turning, making it easy to steer. High clearance? Try a generous 34 in. (86.4 cm) of fore-and-aft clearance and 33 in. (83.8 cm) of underframe clearance. Thats plenty of room for heavy residue. Plus, the 3710 Drawn Plow lets you fine-tune width of cut to match horsepower to field conditions.
Light-draft bottoms. Both rigid and flex 3710 Plows feature light-draft bottoms. This unique design delivers excellent turnover, better scouring, and easier pulling. Youll save fuel and frustration.
3710 DRAWN FLEX PLOW
This wide-body plow, available in 9- and 10-bottom models, is equally long on performance. The 3710 Flex Plow features a rugged hitch in the middle of the 8x8-in. (203x203-mm) mainframe. The two-piece frame conforms to contours, yet offers one-piece turning for easy maneuvering. Gauge and tail wheels add stability and depth control to the rear of the plow. And the gauge wheel is positioned close to the frame so you can plow next to fences.
3710 DRAWN RIGID PLOW
Available with 6, 7, or 8 bottoms for perfectly formed furrows in a variety of field conditions. The adjustable width-of-cut rigid model range of adjustment is 14 to 22 in. (356 to 559 mm). A simple turnbuckle adjustment makes the job a breeze. Or choose hydraulic control for convenient, on-the-go adjustment.
HIGH CLEARANCE HANDLES HEAVY RESIDUE LEVELS
Excellent fore-aft and vertical clearance between standards (arrows above) allows the soil and residue to freely flow through the plow:
Both rigid and flex plows are designed to handle tall and heavy residue levels.
ADJUSTABLE WIDTH OF CUT
The operator can change the plow's width of cut to match the tractor horsepower and soil conditions.
Narrow in tough soil
Wider in lighter soil
The rigid plow has a width-of-cut range of 356 mm to 559 mm (14 in. to 22 in.) on land and 508 mm to 559 mm (20 in. to 22 in.) in furrow.
Economical manual adjustment (turnbuckle is standard equipment)
Convenient hydraulic cylinder adjustment is optional
Pointer and decal allow returning to a predetermined width of cut
The flex plow has 356 mm to 559 mm (14 in. to 22 in.) of cut.
Adjustments are made by adjusting two turnbuckles (arrows) to a predetermined length specified in the operator's manual.
SCISSOR-TYPE LANDING HELPS WITH TIGHT TURNS ON RIGID MODELS
The rigid model uses a scissor-type landing adjustment to set the first bottom in relationship to the rear tractor tire for the different widths of cut:
Design uses minimum space, gives a clean-style appearance, and has a full range of adjustment.
Economical turnbuckle is used to make the adjustment.
Operator-supplied 76-mm x 203-mm (3-in. x 8-in.) American Society of Agricultural Engineers (ASAE) tie-bolt hydraulic cylinder may be used in place of a turnbuckle for in-furrow applications.
LAND WHEELS ON RIGID MODELS ARE TIED TO THE ADJUST-O-CUT BAR FOR AUTOMATIC SETTING FOR EACH WIDTH OF CUT
Land wheels help to stabilize the plow in both the working and transport positions. They also control the depth of plowing and work in conjunction with raising and lowering the plow.
Land wheels on rigid plows are tied to the Adjust-O-Cut bar for automatic setting for each width of cut.
A single wheel is standard on the six-bottom model; dual wheels are standard on the seven- and eight-bottom models and optional on the six-bottom model (recommended in softer soils).
Provides good trailing characteristics in transport.
FLEX MODELS ARE EQUIPPED WITH DUAL, STAGGERED WALK-OVER LAND WHEELS
Land wheels on flex plows have four adjustment positions (arrow) to allow setting the assembly for 406-mm, 457-mm, or 508-mm (16-in., 18-in., or 20-in.) widths of cut or transport:
Depth stops are used for easy adjustment of the depth.
Dual, staggered Walk-Over wheels are standard on flex plows:
Allow the plow to trail like a cart
Distribute weight evenly between both wheels
Minimize bulldozing in soft soil
Allow better residue flow
Walk over obstacles and across dead furrows
SPRING-RESET STANDARDS AVAILABLE TO WORK NON-STOP IN ROCKS
The double-pivot design of the spring-reset standard uses tension spring force to return the standard to the working position.
For heavier-duty applications
Non-adjustable trip force; factory set at 2727-kg (6000-lb) nominal
Floats over buried rock
Unhooks from ledge rock
SAFETY-TRIP STANDARDS FOR NORMAL PLOWING CONDITIONS
Safety-trip standards provide an economical means for protectionsuited for areas without rocks:
No backing to reset, just raise
Shim-adjustable trip force
2727-kg (6000-lb) nominal trip force (set at the factory)
Smooth surfaces for good residue flow
Few moving parts equals high reliability
LIGHT-DRAFT NU BOTTOMS PERMIT HIGH-SPEED PLOWING
The NU bottoms are set behind the mainframe to prevent the mainframe from becoming a pinch-point for residue. They are designed for light draft and high-speed plowing.
Operators often find they can plow a gear higher than with competitive plows
Greater productivity and fuel economy
Speeds up to 10 km/h (6 mph)
Available in 400-mm (16-in.) and 450-mm (18-in.) sizes with an unpolished finish.
SHEAR-BOLT COULTERS SUITED FOR AREAS WITHOUT ROCKS
Economical design of the shear-bolt coulters is suited for areas without rocks:
Few moving parts
Good depth adjustment range
Good lateral adjustment range
ADJUSTABLE-FORCE CUSHION COULTERS AVAILABLE FOR ROCKY OR NORMAL FIELD CONDITIONS
Adjustable-force cushion coulters are suited for rocky or normal field conditions:
Excellent rosette depth adjustment range
Good lateral adjustment range
Separate down-force adjustment
Overload protection to prevent damage
Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate