JOHN DEERE - 995 Back
JOHN DEERE REVERSIBLE PLOW 995
LESS MAINTENANCE, FASTER PLOWING
John Deere 975/995 Reversible Plows give you some definite advantages, both in the field and on your bottom line. The pivoting design lets you reverse the moldboards to make right- and left-hand-side passes to finish plowing faster.
Regardless of your tractor, weve got your plow. The in-furrow 975 Plow, available with 3, 4, or 5 bottoms, is ideal for small- to medium-sized tractors. The on-land 995 Plow, in 5, 6, or 7 bottoms, gives you maximum productivity from larger-horsepower tractors.
John Deere plow options. You can configure a new 975/995 Plow with plastic moldboards, mechanical trip, and adjustable width of cut.
No adjustments needed. Simply level the 975/995 Plows when you hook up to the Quick-Couplers, then go.
John Deere 975/995 Reversible Plows give you some definite advantages, both in the field and on your bottom line. The pivoting design lets you reverse the moldboards to make right- and left-hand-side passes to finish plowing faster. The in-furrow 975 Plow, available with 3, 4, or 5 bottoms, is ideal for small- to medium-sized tractors.
The on-land 995 Plow, in 5, 6, or 7 bottoms, gives you maximum productivity from larger-horsepower tractors. Add the options you have with John Deere plows more sizes, plastic moldboards, safety trip, and adjustable width of cut and you can design a new 975/995 Plow to make all your plowing jobs go fast and easy.
REDUCE MAINTENANCE COSTS. A three-piece moldboard design reduces maintenance costs by letting
you replace worn shins rather than the entire bottom. Choose from steel or plastic moldboards. The steel moldboards are best for tough or abrasive soils. Optional plastic moldboards offer good soil- shedding ability.
HANDLE ROUGH AND ROCKY GROUND. Tension-bolt trip comes standard. It trips when the plow hits a force around 7,500 lb. (3,402 kg), preventing damage to the plow and bottom. For rocky fields, consider optional mechanical-trip standards. The moldboard frame pivots with the bottoms, reversing laterally with a hydraulic cylinder.
V-STYLE MAINFRAME DISTRIBUTES WEIGHT FOR GOOD PENETRATION
The V-style mainframe of the 995 Moldboard Plow distributes weight for good penetration. The mainframe is made of high-strength 178-mm x 102-mm (7-in. x 4-in.) tubing that is 8-mm (5/16-in.) thick to handle the stress of high-horsepower tractors working in tough ground conditions.
MOLDBOARD FRAME PIVOTS WITH THE BOTTOMS
All 995 Moldboard Plows use only one set of bottoms. The moldboards are reversed laterally by a hydraulic cylinder that is standard equipment. There are several advantages of this design over traditional two-way rollover plows with two sets of bottoms:
Requires less 3-point hitch capacity
Requires less ballasting of the tractor front end
Eliminates initial cost and service requirements for one complete set of standards and bottoms
The reversing pin is positioned at a 13.5-degree angle, instead of being straight up, for even plowing in both directions. The reversing pin does not require adjustments by the operator.
INTEGRAL ON-LAND HITCH PROVIDES EXCELLENT MANEUVERABILITY
The integral hitch gives unexcelled maneuverability in turns and when parking in tight areas:
Category 3/3N Quik-Coupler compatible
Tractor rockshaft lever controls the raising and lowering of the plow
Maximum plowing depth to 356 mm (14 in.)
Provides ample clearance between the tractor tires and the plow
ADJUST FRONT GAUGE WHEELS TO LIMIT PLOWING DEPTH
The front gauge wheels can be adjusted to limit the plowing depth to 356 mm (14 in.). They come equipped with 6.70-15 tires.
REAR GAUGE WHEELS COME IN STANDARD EQUIPMENT
Two front and one rear gauge wheels are standard equipment on the 995 Moldboard Plow:
Equipped with 6.70-15 tires for good flotation
Easy turnbuckle adjustment on rear gauge wheel
Adjustable front gauge wheels limit the plowing depth to 356 mm (14 in.)
Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate