JOHN DEERE - 975 Back
JOHN DEERE REVERSIBLE PLOW 975
LESS MAINTENANCE, FASTER PLOWING
John Deere 975/995 Reversible Plows give you some definite advantages, both in the field and on your bottom line. The pivoting design lets you reverse the moldboards to make right- and left-hand-side passes to finish plowing faster.
Regardless of your tractor, weve got your plow. The in-furrow 975 Plow, available with 3, 4, or 5 bottoms, is ideal for small- to medium-sized tractors. The on-land 995 Plow, in 5, 6, or 7 bottoms, gives you maximum productivity from larger-horsepower tractors.
John Deere plow options. You can configure a new 975/995 Plow with plastic moldboards, mechanical trip, and adjustable width of cut.
No adjustments needed. Simply level the 975/995 Plows when you hook up to the Quick-Couplers, then go.
John Deere 975/995 Reversible Plows give you some definite advantages, both in the field and on your bottom line. The pivoting design lets you reverse the moldboards to make right- and left-hand-side passes to finish plowing faster. The in-furrow 975 Plow, available with 3, 4, or 5 bottoms, is ideal for small- to medium-sized tractors.
The on-land 995 Plow, in 5, 6, or 7 bottoms, gives you maximum productivity from larger-horsepower tractors. Add the options you have with John Deere plows more sizes, plastic moldboards, safety trip, and adjustable width of cut and you can design a new 975/995 Plow to make all your plowing jobs go fast and easy.
REDUCE MAINTENANCE COSTS. A three-piece moldboard design reduces maintenance costs by letting
you replace worn shins rather than the entire bottom. Choose from steel or plastic moldboards. The steel moldboards are best for tough or abrasive soils. Optional plastic moldboards offer good soil- shedding ability.
HANDLE ROUGH AND ROCKY GROUND. Tension-bolt trip comes standard. It trips when the plow hits a force around 7,500 lb. (3,402 kg), preventing damage to the plow and bottom. For rocky fields, consider optional mechanical-trip standards. The moldboard frame pivots with the bottoms, reversing laterally with a hydraulic cylinder.
MOLDBOARD FRAME PIVOTS WITH THE BOTTOMS
All 975 Moldboard Plows use only one set of bottoms. The moldboards are reversed laterally by a hydraulic cylinder that is standard equipment. There are several advantages of this design over traditional two-way rollover plows with two sets of bottoms:
Requires less 3-point hitch capacity
Requires less ballasting of the tractor front end
Eliminates initial cost and service requirements for one complete set of standards and bottoms
The reversing pin is positioned at a 13.5-degree angle, instead of being straight up, for even plowing in both directions. The reversing pin does not require adjustments by the operator.
STRONG MAINFRAME HANDLES TOUGH PLOWING JOBS
The V-style mainframe is made of 152-mm x 102-mm (6-in. x 4-in.) welded tubular steel to handle the stress of tough plowing and reversing action as well as tight turns:
5-mm (3/16-in.) thick on three-bottom plows
8-mm (5/16-in.) thick on four- and five-bottom plows
EASILY MANEUVER TIGHT TURNS WITH INTEGRAL IN-FURROW HITCH
Compatible with tractors equipped with Quik-Coupler, the integral hitch offers unexcelled maneuverability in turns and when parking in tight areas:
Tractor rockshaft lever controls the raising and lowering of the plow
Maximum plowing depth is 356 mm (14 in.)
ADJUSTABLE WIDTH OF CUT IMPROVES RESIDUE-HANDLING ABILITY
The width of cut on all 975 Moldboard Plows can be set at 406 mm or 457 mm (16 in. or 18 in.) by moving the standards to different bolt holes to:
Match the tractor horsepower to the soil conditions
Improve the residue-handling ability
Maximize fuel efficiency
The underframe clearance is 813 mm (32 in.) to allow excellent material flow through the plow.
ADJUSTABLE REAR GAUGE WHEEL COMES IN STANDARD EQUIPMENT
All 975 Moldboard Plows come with a rear gauge wheel included in standard equipment. The rear gauge wheel provides the following features:
Controls the plowing depth of the rear of the plow in rolling terrain
Stabilizes rear of the plow in soft soils
Adjustable through a full range of plowing depths
Designed for easy turnbuckle adjustment
Equipped with 6.70-15 tire to eliminate bulldozing in soft soils
Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate