JOHN DEERE - 2100 Back
JOHN DEERE MINIMUM TILL RIPPER 2100
UNBEATABLE COMPACTION FIGHTER
The John Deere 2100 Minimum-Till Ripper fractures yield-robbing compaction while preserving residue levels in your no-till or minimum-till fields.
AVAILABLE IN A VARIETY OF CONFIGURATIONS
The 2100 is available in a 3- or 5-standard configuration on 30- or 36-in. (76.2- or 91.4 cm) spacing, 4-standard configuration on 30-in. (76.2-cm) spacing 7-standard configuration on 30-in. (76.2-cm), 9-standard 30-in. (76.2-cm) folding models. Thin, -in. (1.9-cm) ripper standards slice cleanly through the soil as deep as 16 in. (40.6-mm).
FUEL-SAVING WING DESIGN
Our wing design is optimized for fuel efficiency.
RIPPER POINT AND COULTER OPTIONS
The tough 7- and 10-in.(17.8 cm to 25.4 cm) minimum till ripper points shatter deep compaction. The 2.5-in. (6.4-cm) wingless points are designed for ultra-low disturbance. A smooth, spring-cushioned 22-in (55.9-cm) coulter produces the least amount of soil and residue disturbance. Choose a 22-in (5.59-cm) rippled coulter for more movement.
FIRM AND LEVEL THE SOIL
The optional rear closing wheels set back behind each standard feature 250 lbs. (113 kg) of down-pressure and can be slid in or out and angled from 0 to 15 degrees to match varying field conditions.
ADJUSTABLE STABILIZER WHEELS
Two adjustable stabilizer wheels are included as base equipment, ensuring straight travel and added frame support. No tools are required to adjust the stabilizer wheel height.
QUICK AND EASY CONNECTIONS
Connections between your tractor and the 2100s rugged frame are quick and easy with a Category 2, 3 or 3N hitch (with Quick-Coupler.)
19-MM (0.75-IN.) STRAIGHT SHEAR-BOLT STANDARD MINIMIZES SOIL AND RESIDUE DISTURBANCE AT THE SURFACE
Equipped with replaceable wear shins to control wear on the leading edge of the shank that greatly extends the life of the standard, unlike some of the competitive models
Can only be equipped with 64-mm, 178-mm, or 254-mm (2.5-in., 7-in., or 10-in.) min-till ripper points
The 19-mm (0.75-in.) straight standard is base equipment. It is also available as an attachment for field conversion.
VARIETY OF WORKING WIDTHS AVAILABLE
The 2100 Minimum-Till Ripper is available in working widths from 2.29 m to 6.86 m (7 ft, 6 in. to 22 ft, 6 in.).
HEAVY-DUTY FRAME HANDLES TOUGH OPERATING CONDITIONS
The frame is constructed with a 102-mm x 152-mm x 10-mm (4-in. x 6-in. x 0.375-in.) cross tube on three-, four-, five-, and seven-standard machines and 152-mm x 152-mm x 10-mm (6-in. x 6-in. x 0.375-in.) cross tube on nine-standard models where the hitch-mounting components are welded for maximum strength.
Truss tubes connect the cross tubes and are constructed with 127-mm x 127-mm x 13-mm (5-in. x 5-in. x 0.5-in.) steel tubing.
Welded together into one assembly, the frame is designed to handle the most severe operating conditions.
The mainframe is 4.06-m (160-in.) wide and is the same whether there are five shanks on 762-mm (30-in.) spacings. Frame extensions make this task possible and make configurations easier to adjust.
2100 DRAWN HITCH OPTION AVAILABLE FOR SEVEN- AND NINE-STANDARD MODELS
A drawn hitch option is available for those who want to use large row-crop tractors or 4WD tractors without a 3-point hitch.
The drawn hitch is only compatible with seven-standard and nine-standard 762-mm (30-in.) models. The drawn hitch is also available as an attachment for field conversion.
The transport wheels are placed in front of the front rank of the mainframe. This allows residue to flow freely and keeps the wheels close to the standards to allow the ripper to follow the ground contour.
The wheel modules are mounted to the front, rear, and end frame of the ripper, making it the most stable wheel package in the in-line ripper market. The tires are placed directly in front of the ripper standards so the shanks can remove the tire track in order to leave as level a profile as possible.
There is no need for stabilizer wheels with the drawn hitch. The wheels are located within 762-mm (30 in.) of the outside edge of the machine to provide stability in both field and transport conditions.
The nine-standard model has eight-bolt hubs and spindles with beefy 12.5L-15 tires. The seven-standard model uses 11L-15 tires. The large tires provide excellent field flotation and transport stability.
A pressure-compensating flow divider is the heart of the depth control system. Temporary adjustments can be made while maintaining the ability to raise and lower evenly.
The machine does not need to be fully raised at the end of a pass to keep the cylinders in phase, and cylinder stops are used to set the overall operating depth.
The drawn hitch attachment is only compatible with serial number 1300 or newer machines.
CLOSING WHEEL AVAILABLE TO MINIMIZE SURFACE DISTURBANCE
Closing wheels can be added to the rear of the 2100 Minimum-Till Ripper with 19-mm (0.75-in.) standards.
Closing wheels offer the following benefits:
Minimize surface disturbance created by the standard
Provide more adjustments to match farming practices and varying soil conditions than competitive models
114 kg (250 lb) of down pressure
Mounted close to the shank, allowing a high trip clearance for operation through washouts, etc.
Mounted with an L-bracket, allowing better soil and residue flow
SPRING-CUSHION COULTERS ENABLE MORE LEVEL SOIL PROFILE
559-mm x 5-mm (22-in. x 0.177-in.) straight blade is in base equipment and allows the least amount of soil and residue disturbance.
559-mm x 5-mm (22-in. x 0.177-in.) rippled blade is optional equipment for use when increased soil movement is desired.
STABILIZER WHEELS ENSURE STRAIGHT TRAVEL AND PROVIDE SUPPORT
Two adjustable 521-mm x 203-mm (20.5-in. x 8-in.) stabilizer wheels are included in base equipment to ensure straight travel and provide support on three-, four-, five-, and seven-standard sizes. The nine-standard size has four stabilizer wheels.
The stabilizer wheels are designed to stabilize the unit and are not intended to be used as depth gauge wheels. The weight of the unit must be carried on the tractor.
Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate