JOHN DEERE STACK-FOLD PLANTER 1725 C
GROWING THE FAMILY
Were confident cotton growers will approve of this machine. The 1725C provides all the agronomic advantages ExactEmerge offers dual electric motors, BrushBelt delivery system, and an industry-best 10mph planting speed. Or go with MaxEmerge 5e. Either way, it comes as a 12-row configuration in available spacings of 36, 38 or 40 inches. Plus, you get a 35-bushel CCS tank without lift assist wheels to get in the way, so you can move through fields with superior pace and precision. You get all the maneuverability needed for operating in bedded crops or at the end of rows. Plus, hydraulic wing locks make moving from field-to-field a breeze.
1725C ADDITIONAL FEATURES (EXACTEMERGE ONLY)
With enhancements to the ExactEmerge 1725 frame, were giving customers a more refined planting solution. Like running vacuum hoses directly through the frame to offer a cleaner look and less complexity. Plus, it comes equipped with automatic wing lock, so you no longer have to get out of the cab to lock and unlock the wings before or after a fold the hydraulic locking system does it for you automatically. Also, wing down force keeps the wing from floating at higher speeds ... which is key for planting above 5 mph. And double acting cylinders apply force to the wings to make them heavier, while transferring the weight off the center frame. This eliminates bouncing on the outside row units and helps control ride quality and seeding depth.
12-row, 36-, 38- or 40-in. spacing
No lift-assist wheels for improved maneuverability
Hydraulic wing locks for faster field-to-field transport
35-bushel CCS tank
INTEGRAL STACK FOLDING
Convenient stack-folding design can be used rigid or flexible. The 1725C stack-fold design provides narrow transport capability for these integral, large-frame planters. 1725C Stack-Fold Planters have the ability to operate in both rigid-frame and flex-frame configurations. The 1725C utilizes a three-section frame that can flex up to 8 degrees up and 8 degrees down. 1725C is not offered with markers. The 1725C Stack-Fold Integral Planter is available in the following configurations: 12Row36, 12Row38 or 12Row40.
CENTRAL COMMODITY SYSTEM (CCS)
CCS seed delivery adds productivity through increased seed capacity, bulk-fill capability and easy cleanout. The single tank on the 1725C has a capacity of 1233.4 L (35 bu). CCS tanks are manufactured using a rotomolded, polyethylene design to ensure maximum durability. The translucent tank allows for easy viewing of seed in the tanks.
The following crops can be planted with CCS: corn, sweet corn, popcorn, cotton, sunflowers, soybeans and sorghum (milo). Filling the tank is convenient due to a central filling location. The ladder provides access to the filling platform. The tank has an adjustable bin-level sensor to alert the operator when it is time to fill.
For those who work into the night, a standard fill light package is available on machines equipped with CCS. This option includes one light conveniently mounted on the railing of the machine. The lights are turned on and off with their own switch located at the bottom of the ladder.
MAXEMERGE 5E OVERVIEW
The MaxEmerge 5e is designed to improve population accuracy, spacing, and avoid wasting inputs for maximizing yield. The "e" in MaxEmerge 5e stands for electric drive. It is driven by one electric motor per meter with a small controller. This does away with the shafts and drivelines of a typical mechanical drive. That means more reliability, less maintenance, and easier access to row-unit components. For producers who want uniform seed spacing, the MaxEmerge 5e is a great option.
One of the biggest advantages of the MaxEmerge 5e is how it improves population accuracy by compensating for curves on the outer rows of the planter. The MaxEmerge 5e row-unit eliminates shafts and drivelines from the planter, allowing better access to row-unit components and decreased planter maintenance. Additionally, the MaxEmerge 5e allows corn and soybean growers to achieve up to a 20 percent improvement in population accuracy on the outer rows of a 24-row planter while planting on curves utilizing curve compensation.
Terraces or waterways are two of many field obstacles that make planting on a curve challenging. When planters utilize drive shafts, they are not able to control each individual row-unit; as a result, planting on a curve presents an issue of maintaining 100 percent population. Since the inside rows are moving slower than the outside rows, the inside rows will be over populating while the outside rows are under populating.
With ExactEmerge planters and equipped MaxEmerge 5e planters, the curve compensation feature allows each row to receive an individual signal based on the speed at which the row-unit is moving, maintaining the correct population across the width of the planter. Without curve compensation, there could be as much as a 24 percent drop in population accuracy, which is equivalent to 8,600 seeds per acre when planting at 36,000 seeds per acre. Curve compensation measures acceleration within the main planter controller and utilizes speed inputs to ensure each row has the desired population accuracy.
EASY ADJUST ROW CLEANERS
With the Easy Adjust row cleaners on ExactEmerge planters, operators now have a pneumatic solution to make on-the-go adjustments that is controlled directly from the seat of the cab. They can be raised from the cab as needed with the push of a button for wet areas, waterways or end rows. For growers using SeedStar 3 HP, the row cleaners are completely integrated into the John Deere GreenStar 3 2630 Display as well as the Gen 4 4600 CommandCenter display or 4640 Universal Display. For growers using SeedStar 4HP, a 4600 CommandCenter display or 4640 Universal Display is required.
The Easy Adjust row cleaners have the capability to save three presets for varying ground engagement based on field conditions. The system is controlled in three sections: at each wing as well as the center (frame or wheel) track rows. The pneumatic lines use air from the active pneumatic downforce compressor, requiring no additional compressor to be installed on the planter. The Easy Adjust row cleaners utilize down and up force air bags. The adjustable air pressure setting for each bag allows the operator to set the ride of the row cleaner depending on the field conditions and the desired results. Making these on-the-go adjustments from tractor cab increases productivity and performance during planting.
It is very challenging to get the crop planted during the optimum planting window or as close to the optimum planting day as possible. Rate-of-yield loss accelerates greatly after the optimum window has passed. This is especially true in the northern U.S. and Canada. ExactEmerge maintains accurate speed placement at higher speeds; growers can avoid missing that peak planting time, thereby helping to get the highest crop yields.
With the BrushBelt trench delivery system, the spacing in the trench does not change from even to uneven terrain. This can be a problem with a traditional seed tubes. Seed bounce and ricochet may occur as slopes increases, ultimately decreasing seed spacing performance.
The design of the BrushBelt system provides the best solution for the lowest release of seed to the bottom of the trench. The use of a brush provides the meter with an infinite amount of placement opportunities for each seed. This is what gives producers the confidence that every seed will have the desired spacing that a seed tube cannot provide.
DUAL 56-V ELECTRIC MOTORS FOR EXACTEMERGE ROW-UNITS
Two 56-V brushless electric motors provide ExactEmerge the upper hand over any other row-unit on the market. One motor controls the high-performance meter and the other powers the BrushBelt delivery system. Both feature a closed loop system ensuring they operate at the correct rpm.
The motor is controlled at a rate of 200 times per second and a decision is made every 5 milliseconds. The controller also keeps each motor operating at independent speeds of each other. The meter speed is determined by a combination of ground speed and desired population rate while the BrushBelt speed stays consistent with the forward ground speed of the planter in order to place the seed at the bottom of trench.
SENSORS FOR TRENCH DELIVERY SYSTEM ON EXACTEMERGE PLANTERS
On all ExactEmerge row-units, each cartridge will be equipped with sensors. As the seeds are being delivered through the BrushBelt delivery system controls, they pass the reflective seed sensor. The delivery system slides every seed past the seed sensor to read and send the signal to the controller. The seed sensor and design is able to provide sensor performance at higher seeds per second with no population adjustment as needed with seed tube sensors. This seed sensor data is actual row-unit performance data. In comparison, seed tube sensors add 10 percent population in soybean planting to adjust for the seeds missed due to placement within the seed tube. The BrushBelt system holds each seed in place until released in the trench, allowing the seed sensor a more accurate read.
MOBILE ROW-UNIT RUNOFF
The first day of planting season can be as productive as the last with mobile row-unit runoff. The mobile row-unit runoff activation on the planter main controller (PMC) allows operators to make adjustments to maximize row-unit performance from a mobile device at the rear of the planter for both preseason and in-season use - all enabled through the PlanterPlus app. Mobile row-unit runoff allows growers to perform test-stand functions from a mobile device connected to the planter.
The row runoff test provides complete diagnostic checks both preseason and in season. With the row-unit runoff test, the operator can make adjustments from the mobile device, including vacuum pressure, to determine the optimum meter and vacuum settings. This app functionality will help avoid making trips to the cab while validating meter performance.
During preseason planter inspections and set up, utilize the meter performance test to validate meter accuracy, similar to a test stand without leaving the farm. Test all systems on the planter, not just the meter, providing confidence that all planter systems are ready to plant. Reports are generated from the test providing information the operator can save and send for future reference. Before heading to the field, the operator will benefit from knowing the best row-unit and vacuum settings for each variety selected to plant that spring.
INCREASE JOB PERFORMANCE WHEN PLANTING AND SPRAYING
John Deere Connect Mobile is a solution that utilizes an Apple iPad tablet in the cab and helps the operator increase job performance during planting and spraying operations. Connect Mobile documents and displays multiple quality layers, helping the operator monitor and more easily detect problems that can occur during planting and spraying. Connect Mobile also has a common user interface that makes it easy to use between different pieces of John Deere equipment.
SEEDSTAR 4HP MONITORING SYSTEM
SeedStar 4HP is designed to optimize the in-cab monitoring experience exclusively on the Gen 4 4600 CommandCenter display or 4640 Universal Display for growers with ExactEmerge planters and MaxEmerge 5e planters model year 2018 and newer. With SeedStar 4HP, operators will easily see key planter information with customizable run pages, zoom functionality, and simultaneous graph and performance measurements. SeedStar 4HP is included in base on all model year 2018 ExactEmerge and MaxEmerge 5e planters.
SEEDSTAR FEATURES OVERVIEW
View multiple planters' at-a-glance bar charts simultaneously
Three default planter run pages show key planter functions in easy-to-view layouts
Highly configurable run pages allow SeedStar modules to be customizable
Zoom feature allows quick row-by-row detailed information
View dual bar graphs to see multiple planter details at one time
SeedStar application to make adjustments to planter functions
Simplified setup through the work set-up page
Custom rates allow up to six different rates across 48 rows
The SeedStar 4HP monitoring system requires the Gen 4 4600 CommandCenter or 4640 Universal Display. These displays allow the operator to benefit from the updated interface, enhanced processing speeds, and easy setup (learn more here).
SeedStar 3 HP conversion to SeedStar 4HP with mobile row-unit runoff aftermarket for field conversion kits
Growers who are currently running model year 2017 planters, model year 2017 and newer retrofit kits, or model year 2017 and newer custom-built planters with the SeedStar 3 HP monitoring system can upgrade to the SeedStar 4HP monitoring system with mobile row-unit runoff. The attachment part, AA100382, is software only. The Gen 4 display software version will need to be 19-1 or newer and will require planter apps. Contact your dealer for details.
Similar models may be shown in addition to the featured model. Equipment may be shown with options.
Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate
JOHN DEERE STACK-FOLD PLANTER 1725 C