JOHN DEERE DRAWN PLANTER 1775
PERFECT MATCH OF SIZE AND ABILITY
The 1775 can fit into just about any farming practice. This 12-row, 30-inch spacing machine is our largest planter with dry fertilizer capability, so you can plant and enrich your land on more acres in less time. More importantly, its as precise in delivery as you demand.
The flex frame design of the 1775 uses a two-section frame that bends in the middle, with 20-degree up or 30-degree down motion. This allows you to glide over terrain that can prove challenging for other planters, like terraces and slopes.
12 rows on 30-in. spacing
Available in 1.6-bu. or 3-bu. MaxEmerge 5 row unit Insecticide option for 1.6-bu.
2-section frame flexes 20 degrees up & 30 degrees down
SEED VARIABLE RATE DRIVE (VRD) WITH HALF- OR THREE-WIDTH DISCONNECT
The seed variable-rate drive provides the ultimate planting productivity by utilizing one, two or three hydraulic motors (varies by model) to turn the seeding drive shaft. Hydraulic control of the seeding drive allows for on-the-go seeding rate changes right from the display mounted inside the tractor cab.
Single- or dual-motor systems for variable-rate drives are available for all John Deere planters except the 1785 Rigid Frame. Dual- or three-motor drive systems are commonly used on larger (12-row and more) planters and offer the capability of half-width or three-section drive disconnect.
MAXEMERGE 5 ROW-UNIT
The MaxEmerge family of row-units have never seen a more versatile and efficient design until the MaxEmerge 5. The 5-family row-units improve productivity, increase uptime and lower the cost of ownership like never before.
GRANULAR FERTILIZER SYSTEMS
Granular fertilizer is available for 1755, 1775, and 1785 Planters. Fertilizer hoppers/tanks and selected other equipment may not be installed to facilitate shipping. Fertilizer attachments place fertilizer only on 76.2-, 91.4-, or 96.5-cm (30-, 36- or 38-in.) spacings. Some planter frame and row spacing combinations result in the opener offset from 10.1 to 15.2 cm (4 in. to 6 in.) of the centerline of the Tru-Vee opener.
Hoppers hold approximately 249.5 kg (550 lb) of fertilizer for longer operating time between fill-ups. One hopper feeds two rows. Hopper lids provide large opening for fast filling with less spillage. Hoppers pivot for easy dumping and cleaning.
Transmission (two on 1775) has 24 sprocket combinations in consistent 6 percent increments to allow applying fertilizer at the desired application rate. Depending on which auger is selected, a wide range of fertilizer rates can applied from 21 kg/ha (47 lb/acre) to 325 kg/ha (717 lb/acre). Requires openers or surface application bracket.
ROWCOMMAND INDIVIDUAL-ROW CONTROL SYSTEM
Controlling input costs and improving productivity are key producer requirements today. RowCommand is an effective, integrated John Deere solution designed to meet these intensifying needs. The RowCommand system manages seed output, reduces yield drag, and improves harvest capabilities on all Pro-Shaft driven row-units, and chain-driven MaxEmerge 5.
ROW CLEANER OPTIONS TO MEET RESIDUE MANAGEMENT NEEDS
Crop yields have increased through the years along with the amount of residue left in the field after harvest. At the same time, tillage practices have changed, including different tillage operations which maintain large amounts of surface residue, and even no till practices. Row cleaners are an essential tool in managing this increased amount of residue.
TIRE CONTACT DRIVE SYSTEM
The tire contact system drives the seed transmission mounted above the inner planter ground drive tire. A turf tire engages the ground drive tire when the planter is lowered--automatically turning the seed transmission and seed meters. Automatic drive disconnect occurs when the planter is raised and the turf tire separates from the ground-engaging tire. The system eliminates clutches, countershafts, and manual transport disconnects needed on direct ground drive systems. Drive chains and sprockets are moved up and out of the soil and residue zone for excellent reliability.
SEEDSTAR 2 MONITORING SYSTEM
Integrated innovation--that is what operators will appreciate with the SeedStar 2 monitoring system and GreenStar 2 (GS2) Display. An increasing number of acres combined with rising seed costs drive the need to easily understand planter functions and monitor performance. It is all about making every seed count and that is what SeedStar 2 delivers.
SEED VARIABLE-RATE DRIVE
Seed variable-rate drive provides the ultimate planting productivity by utilizing one, two, or three hydraulic motors (varies by model) to turn the seeding drive shaft. Hydraulic control of the seeding drive allows for on-the-go seeding rate changes right from the display mounted inside the tractor cab. Combine this seeding flexibility with the map-based planting option, and seeding rates adjust automatically based on the prescribed map.
Similar models may be shown in addition to the featured model. Equipment may be shown with options.
Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate
JOHN DEERE DRAWN PLANTER 1775