Z915E JOHN DEERE Z900 SERIES ZTrak ZERO-TURN MOWERS
Our ZTrak 900 Series zero-turn mowers were designed with our commercial lawn mowing customers in mind. And since you all have different needs, we came up with different ways to help you meet them. With the Z915E, you can do basically anything. An 11.5 gallon fuel tank helps you power through large jobs. Professional grade seats with ComfortGlide Suspension keep operators comfortable all day long. And large rear tires for a balanced ride. Plus the 7-Iron II deck stamped from a single piece of 7-gauge steel.
7-Iron II Mowing Deck
Hydrostatic Drive Train
Commercial-grade Operator Seat
POWERFUL 25.0-hp (18.6-kW) COMMERCIAL-GRADE ENGINE DELIVERS CLASS-LEADING PERFORMANCE & EFFICIENCY
The Z915E is powered by an air-cooled, vertical shaft engine
25.0-hp (18.6-kW) gas engine
Overhead valve design
More horsepower and torque per cubic inch of displacement
Fuel efficient design
Full-pressure lubrication with full-flow filter
Reduces engine wear by ensuring proper lubrication, even when operating on hillsides or uneven terrain
Oil filter helps keep oil clean for increased engine life
V-twin big block design
Easy-access, dual-element air filter with quick-release latch
Complies with strict Environment Protection Agency (EPA) and California Air Resources Board (CARB) emission standards without loss of horsepower or torque
EXTRA DURABILITY & MOWING PERFORMANCE FROM 7-IRON II SIDE-DISCHARGE DECKS PRESSED FROM A SINGLE PIECE OF STEEL
Deck is stamped from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside, with fewer sharp corners, for reduced material buildup
This design minimizes the number of welds on the deck shell itself.
There is an anti-skid pad on the top corner of the trim side of the deck
High blade tip speed - 18,500 fpm (5,638.8 m/min) for more blade cuts per inch mowed
A deep-deck design of 5.5 in. (14 cm) delivers excellent airflow so material can be processed quickly and efficiently
The wide and high discharge opening provides even clipping dispersal for an excellent finished appearance in all conditions
TWO SEAT CHOICES WITH ComfortGlide FORE/AFT SUSPENSION OFFER EXCEPTIONAL OPERATOR COMFORT
There are two seating options available for the E Series, both of which are factory installed. Each seat has the ComfortGlide fore/aft suspension system that gives superior ride comfort over uneven areas:
1. Deluxe comfort seat with armrests
2. Deluxe comfort seat with armrests and isolation
THREE-YEAR BUMPER-TO-BUMPER WARRANTY
An exclusive 2-year, unlimited hour/3-year, 1200-hour (whichever comes first) bumper-to-bumper warranty is standard for all John Deere E and M Series Mowers. The warranty is best in its class and places John Deere at the forefront of commercial mowing. It is also hassle free, with one company handling all of the paperwork.
NOTE: 36 months or 1200 hours, whichever comes first. For the first 24 months, there is no hour limitation.
HEAVY-DUTY FRAME PROVIDES STRENGTH & DURABILITY
Heavy-duty, thick-gauge, steel channel mainframe for strength and durability
Cast I-beam caster arms to handle the beating and pounding professional mowers receive
Wide-open access for maintenance and cleaning
DURABLE HYDROSTATIC DRIVE TRAIN THAT DELIVERS BETTER COOLING & PROVIDES EASY ACCESS
The hydrostatic drive features two 13-cc (0.8-cu in.) unitized hydraulic pumps combined with commercial-grade, heavy-duty wheel motors into a single unit
One pump and one motor drive each wheel on the ZTrak E and M Series Mowers
Exceptional cooling in high-load conditions
Easy-to-check level and refill hydraulic oil
Opens up access under the seat
MICHELIN X TWEEL TURF AIRLESS RADIAL TIRE TECHNOLOGY FOR ZTRAK MOWERS ELIMINATES DOWNTIME AND REDUCES COST OF OPERATION
Mowing Performance Is Improved.
o Rutting is reduced because the Michelin X Tweel Turf has more support across the surface for improved flotation and better ground contact
o Unique energy transfer within the poly-resin spokes reduces the bounce associated with pneumatic tires
o Excellent curb climbing is possible due to the Michelin X Tweel Turf construction and flexibility
o More consistent cut quality is achieved because inconsistent tire pressure is eliminated
Uptime Is Improved.
o The exclusive technology eliminates downtime and associated cost due to flat or damaged tires
o Punctures and sidewall damage no longer result in downtime
Cost of Operation Is Reduced.
o Cost of repairs and maintenance is reduced. One single unit replaces the current tire, wheel, and valve assembly. There is no need for complex tire-mounting equipment
o No need to spend time checking and optimizing tire pressure
o The need to purchase and stock plug kits and spare tires is eliminated, particularly for professional landscape contractors and government agencies who normally stock them
o The tire tread will last up to three times longer than current pneumatic tires because automotive-grade rubber is used for the tread
MOWER IS EASY TO SERVICE WITH MANY ACCESSIBLE COMPONENTS
The design of the Z900 Series makes many service components reachable and easily accessible from the ground
Large, open engine compartment at the rear of the machine provides convenient servicing and directs engine heat away from the operator
SPINDLE ASSEMBLY PROVIDES GREATER PERFORMANCE & RELIABILITY
On every John Deere ZTrak mower deck, there are three 1-in. (2.5-cm) spindles that are cold-forged and heat-treated for strength without bulk. The spindles are supported by precision ball bearings, providing great performance and reliability. The spindle housing is made of aircraft-grade, ribbed cast aluminum on 48-in., 54-in., and 60-in. (122-cm, 137-cm, and 152-cm) decks, including Mulch On Demand configurations. This unique casting design embosses reinforcing gussets in the housing, which adds both strength and cooling surface area that stands up to commercial applications. These spindles can be greased from the top and require no disassembly to reach. Grease channels provide lubrication to both bearings.
PROTECTIVE ZONE AROUND THE OPERATOR IS PROVIDED BY THE ROLLOVER PROTECTIVE STRUCTURE (ROPS)
Getting on and off is easy with the flat operator platform
Convenient-to-use controls located close to the operator are color coded and designed for easy identification and operation
The ROPS and seat belt work in conjunction to provide a protective zone around the operator
It reduces the operators risk of being crushed under the vehicle should it overturn
When used with the seatbelt, the ROPS can reduce the severity of injury in the event of a rollover
Use of the seat belt is recommended when operating with ROPS in the upright position
* The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturers web site for additional information.
Term limited to years or hours used, whichever comes first, and varies by model. See your dealer for details.
Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate
Z915E JOHN DEERE Z900 SERIES ZTrak ZERO-TURN MOWERS