DEERE - 1612DE Back
EJECTOR SCRAPERS KNOW NO LIMITS
Our fixed-blade ejector scrapers boast up to 14-percent more capacity. Plus weve removed the restriction on running our larger scrapers in triple configurations so you can now move up to 54.9 m (72 cu. yd.) of material per cycle.
Redesigned inner wall ensures smooth, snag-free ejection for spreading controlled, consistent loads.
LOW PROFILE FOR BETTER STABILITY
Low-profile design provides a low center of gravity and good visibility to the rear scraper.
HEAVY-DUTY DISC BRAKES
Need more stopping power? Equip your 15.3- or 18.3-m (20 or 24 cu. yd.) ejector scraper with optional heavy-duty disc brakes. For shorter stops, loaded or empty.
EASY DOZER PUSH-LOADING
Integrated rear push block enables push-loading when a dozer is needed. Push block exactly matches the blade radius of John Deere dozers and provides ample tire clearance to accommodate U blades. Quick-attach rear hitch makes coupling and uncoupling a snap when conditions demand.
STRONGER WEIGHT-HANDLING CAPACITY
On the higher-capacity 2412D E, lift-cylinder weight-handling capacity is 10-percent stronger to handle heavy material like wet sand and clay.
MORE CAPACITY, FASTER CYCLE TIMES
Standard super-overflow spill guard increases capacity, while reducing carryback and tire wear. New sweptback push-wall design provides a 26-percent-larger top-loading target, for faster cycle times.
FAST, RELIABLE LOADING
With their wide throat opening and exclusive blade system, loading these ejector scrapers is quick and easy. Mix and match standard and long blades to fit almost any application or material condition.
MAXIMIZE PRODUCTIVITY AND MINIMIZE COSTS WITH THE JOHN DEERE SCRAPER SYSTEM
Throughout the world, contractors have been moving material with conventional self-propelled scrapers or rigid/articulated trucks and excavators. John Deere scraper tractors and scrapers are a valuable solution for contractors, allowing them to move the same material using half the labor, half the investment, and saving 30 cents per cu yd to 50 cents per cu yd.
HALF THE LABOR
The John Deere scraper system is an independent earthmoving system requiring one operator to load, transport, and spread the materials on a job site. Self-propelled and truck/excavator earthmoving systems need additional support equipment to assist with loading and spreading the materials, increasing labor requirements.
HALF THE INVESTMENT
Compare the purchase price of a John Deere scraper tractor and scrapers to competitive systems. Factor in the labor costs, fuel burn, daily operating expenses of all the equipment used in the system, and it all adds up to half the savings over the life of the equipment.
APPLICATIONS FOR THE JOHN DEERE SCRAPER SYSTEMS ARE AS FOLLOWS:
TOP-LOADING JOHN DEERE SCRAPERS INCREASE PRODUCTIVITY FOR ALL APPLICATIONS
John Deere scrapers are designed to handle the harsh conditions of top-loading scrapers. The updated swept-back design to the top off the ejector wall provides a better, unobstructed bowl opening. Heavily shielded hydraulic lines, cylinders, and components provide protection when top loading needs arise. When conditions do not allow for direct loading, John Deere scraper systems can provide as much as 80 tons per cycle in top loading capacity with triples.
Top-loading produces a force caused by the weight of the material falling into the scraper. With the scraper sitting on the ground, this force travels into the ground through the frame of the scraper. If the scraper is in the raised position, the force could cause extreme hydraulic pressure spikes, which can severely damage the hydraulic system of the scraper tractor and scraper. During top loading procedure, make sure the scraper blade is lowered and resting on the ground.
NOTE: Top-loading scrapers in the raised position could void the scraper warranty.
AUTOLOAD SYSTEM FOR SMOOTH LOADING AND EFFICIENT OPERATION
An innovation in the earthmoving industry exclusive to John Deere, the AutoLoad feature allows novice and experienced operators alike to be consistently productive while operating John Deere tractors and scrapers with the touch of a button, even if they have never operated tractors and scrapers.
PUSH LOADABLE EJECTORS TACKLE THE TOUGHEST CONDITIONS
Sometimes, harsh conditions call for a little extra power. In the world of self-propelled scrapers, push loading with a crawler is a way of life. While John Deere pull-type scrapers can direct load in almost any condition, the ability to push load has been built into the design of the ejector line to give earthmovers the additional versatility to which they are accustomed. Rock, hard pan, or heavy gumbos are just a few of the conditions where a crawler assist can keep the dirt moving.
Push loading is approved in single, tandem, and triple ejector trains where a rear scraper extended rear bumper is employed. The 2010D E and 2412D E two-tire models feature an integrated push block standard.
AUTOMATE WATER MANAGEMENT WITH IGRADE LEVELING SYSTEM
The iGrade controller enables and automates new water management applications, as well as John Deere's existing water management tool, Surface Water Pro Plus system. iGrade offers the ability to generate a basic plane and grade, as well as perform distance-based tasks all while automatically controlling the height of the scraper blade.
IGRADE PROVIDES FOUR APPLICATIONS TO COMPLETE DIFFERENT TASKS:
Surface Water Pro Plus automation
THE IGRADE CONTROLLER WORKS WITH MANY OF THE DIFFERENT JOHN DEERE PRECISION AG TECHNOLOGY COMPONENTS PRODUCERS MAY ALREADY OWN, SUCH AS:
GreenStar 2 2600 Display
StarFire iTC receiver
StarFire 3000 Receiver
AutoTrac assisted steering system
Surface Water Pro Plus
IGRADE IS APPROVED FOR THE FOLLOWING PLATFORMS:
9xxx, 8xxx, and 8R Series Wheel Tractors
8xxx and 8R Series Track Tractors
Any selective control valve (SCV) operated water-management implement approved for the above John Deere tractors
NOTE: iGrade requires the receiver to have a real-time kinetic (RTK) signal level. iGrade does not support wide-area augmentation system (WAAS), SF1, or SF2 signal levels.
Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate