Skip Nav
JOHN DEERE - 714 Back
Request a Quote
Year :
2021
Condition :
New
Model Number :
714

JOHN DEERE MULCH TILLER 714

RULE THE FALL WITH THIS ONE-PASS PRIMARY TILLAGE FAVORITE
Save time and money with the John Deere 714 Mulch Tiller. The 714 combines chisel plow standards with coulters so you complete two jobs at once. On-the-go coulter gang control. Now you can hydraulically control the coulter gang right from your tractor seat. With a 5.5-in. (14-cm) range, you can precisely match coulter depth to field conditions for excellent residue sizing and efficient use of tractor power.

UNIFORM TILLAGE FROM FENCEROW TO FENCEROW
Simple turnbuckle hitch leveling, adjusted at the front of the machine, gives you level, uniform tillage.

REDUCE PLUGGING WITH RUGGED RIGID SCRAPER BARS
Satisfy your specific soil and residue requirements with a variety of sweeps and shovels.

SLICE THROUGH TOUGH RESIDUE
The 20x197-in. (50.8x.5-cm) straight coulter blades on 9-in. (22.9-cm) spacing and rugged welded-steel spools deliver trouble-free performance. Exclusive Dura-Flex gang bearings have four protective seals to keep dirt out, and grease in. They come with a two-year warranty* and provide years of excellent reliability.

FEATURES
Simple gang depth adjustment
Coulter gangs
Three-bar frames
Stabilizer wheels

CRANK-ADJUST DEPTH CONTROL AVAILABLE
The crank-adjust single-point depth control is standard equipment on all models and offers the following benefits:
More precise adjustment when changing the operating depth
Easy access at the front of the machine
Accurate, repeatable depth control

SIMPLE GANG DEPTH ADJUSTMENT
The three-bar disk gang model features a mechanical depth adjustment:
Depth adjuster bolts (1) allow adjustment of individual gangs up or down within a 140-mm (5.5-in.) range.

AN OPTIONAL HYDRAULIC DEPTH ADJUSTMENT (2) IS AVAILABLE:
Allows on-the-go hydraulic adjustments to be made from the tractor seat
Gangs adjust up or down within a 140-mm (5.5-in.) range

THREE-BAR FRAMES OFFER STRENGTH
The three-bar frame:
Is constructed of three ranks of standards
Has strength to match higher horsepower tractors
Handles heavier residue levels

THREE-BAR FRAME MODELS HAVE THESE STRENGTH FEATURES:
One-piece welded construction
Solid steel in rear mainframe member
102-mm x 102-mm (4-in. x 4-in.) cross members
51-mm x 102-mm (2-in. x 4-in.) side members
76-mm x 127-mm (3-in. x 5-in.) diagonal frame supports

LONG, NARROW HITCH FOR GOOD MANEUVERABILITY IN TIGHT HEADLANDS
The long narrow hitch design:
Allows good maneuverability in tight headlands
Is constructed of 51-mm x 127-mm (2-in. x 5-in.) steel tubing for strength
Heavy cast-steel hitch link for yoke-type drawbars is standard equipment
Hitch clevis is available for use with straight drawbars (not recommended for tractors over 150 engine hp)

COULTER GANGS
Coulter blades are for use where little incorporation is desired or for erosion-prone areas where it is important to disturb as little residue as possible. Blades are on 229-mm (9-in.) spacing to reduce the chance of plugging.
Two-position blade down-pressure adjustment ensures consistent blade down pressure in light- or heavy-residue conditions.
Coulter gangs have rigid scraper bars.
Dura-Flex bearings and welded steel spools provide reliable performance and durability.
Gangs are spring-cushioned with 140 mm (5.5 in.) of vertical travel to provide protection against rocks or other obstructions.

CHOICE OF RIGID, SPRING-RESET, OR TRU-DEPTH STANDARDS

RIGID STANDARD:
In base equipment on all models
32 mm x 51 mm x 813 mm (1.25 in. x 2 in. x 32 in.)
Economical design is suited for fields having few obstructions
Till to a maximum depth of 279 mm (11 in.)
Good clearance to handle heavy trash: 813 mm (32 in.) of underframe clearance and 381-mm (15-in.) center-to-center spacing

SPRING-RESET 813-MM (32-IN.) STANDARD
Optional on all models
32 mm x 51 mm x 813 mm (1.25 in. x 2 in. x 32 in.)
Suited for fields having rocks or other obstructions
Till to a maximum depth of 279 mm (11 in.)
Trip height of 254 mm (10 in.) for good clearance
296-kg (650-lb) trip force
Automatically resets to the original working position after clearing an obstruction
Good clearance to handle heavy trash: 813 mm (32 in.) of underframe clearance and 381-mm (15-in.) center-to-center spacing

TRU-DEPTH STANDARD
Optional on all models
51 mm x 32 mm x 813 mm (2 in. x 1.25 in. x 32 in.)
Edge bent for extra strength
Designed to work in rocky ground and heavy draft conditions
Till to a maximum depth of 279 mm (11 in.)
Trip height of 279 mm (11 in.) for excellent clearance
568-kg (1250-lb) trip force
Once an obstruction is cleared, the standard automatically returns to its original working position
Excellent clearance to handle heavy trash: 813 mm (32 in.) of underframe clearance and 381-mm (15-in.) center-to-center spacing

VARIETY OF GROUND-ENGAGING TOOLS AVAILABLE TO MATCH CONDITIONS
A variety of shovels are available to match conditions:
76-mm x 610-mm (3-in. x 24-in.) concave twisted shovels for use in a wide range of average soil conditions are base equipment.
102-mm x 610-mm (4-in. x 24-in.) concave twisted shovels for use in light, sandy soils or where greater fracturing between the standards is desired, are optional equipment.
51-mm x 305-mm (2-in. x 12-in.) chrome carbide point chisel provides excellent strength and wear life in tough-to-penetrate conditions.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate

Request a Quote
Year :
2021
Condition :
New
Model Number :
714
Request Information
News

John Deere Spring Clinic Tuesday @ 8:30

John Deere Spring Clinic 2018 on Tuesday 8:30 Feb 27 at Cross Implement in Minier. Get the Latest Information on John Deere Equipment . Register to receive a $750 coupon for select John Deere precision ag products.
Read More

Looking to Roll Your Late Model Equipment | Over 150 1 Season Old Units in Stock

We Are the Largest Single John Deere Dealer Location in North America | Low Overhead + High Volume + Unrivaled Quality = Great Deal
Read More

See it. Drive it. Own it. Join us for Drive Green Demo Days

John Deere Equipment Ride and Drive At Cross Implement 703 S Minier Ave Minier IL 61759 Friday Jun 16 8:00am & 5:00pm Saturday Jun 17 8:00am to Noon
Read More