Skip Nav
JOHN DEERE - 7500A Back
Request a Quote
Year :
2021
Condition :
New
Model Number :
7500A

7500A E-CUT HYBRID & 7500A PRECISIONCUT FAIRWAY MOWERS THE NEXT LEVEL OF TECHNOLOGY

The John Deere E-Cut Hybrid Fairway Mowers take high-performance hybrid technology to the next level. The E-Cut Hybrid technology uses a 48-V alternator to power the cutting units via electric motors, eliminating all hydraulic leak points from the reel circuit, where 90 percent of all hydraulic leaks occur.

In addition to the elimination of leak points, the E-Cut Hybrid Fairway Mowers can be set through the TechControl display to automatically operate at a reduced throttle of 2300 rpm for noise reduction, as well as fuel savings up to 30 percent as compared to hydraulic units.

Eliminating the possibility of a hydraulic leak in the reel circuit is just the beginning. E-Cut Hybrid technology delivers a cut that can be generated only by electricity. The reel speed always stays rock steady for a consistently ideal frequency of clip. So your course always looks pleasing to the eye and plays evenly as well.

No one else in the golf course industry can match our experience and expertise with hybrid mowers. From fairway mowers to riding and walking greens mowers, only John Deere can give you the trust and confidence that comes with this remarkable technology. Your fairways and greens are the highlights of your course. Give them the technology they deserve to look their very best, every day, every season, every year.

The PrecisionCut A Model Fairway Mowers offer several features that separate it from the competition. Like the eHydro hydrostatic pump and large capacity motors for serious hill-climbing capabilities. The GRIP All-Wheel Drive Traction System provides superior traction by reducing wheel slip. And exclusive LoadMatch lets you cut through wet, lush grass evenly by slowing down the traction speed.

Getting on or off these mowers is no problem, thanks to easy entry and exit points. And there are plenty of operator comfort features, like foot-operated tilt steering and a deluxe suspension seat with multiple adjustments for all-day productivity.

E-Cut HYBRID FAIRWAY MOWER FEATURES
TechControl Display locks in performance, and uptime
Set mowing turn speed to reduce scuffing
AutoPedal lowers fuel consumption and noise
Proven hybrid design eliminates hydraulics from reel circuit

PrecisionCut FAIRWAY MOWER FEATURES
TechControl Display locks in performance, and uptime
Set mowing turn speed to reduce scuffing
AutoPedal lowers fuel consumption and noise
Final Tier 4 without sacrificing horsepower

ELECTRIC REEL DRIVE SYSTEM ELIMINATES ALL POTENTIAL LEAK POINTS IN THE REEL CIRCUIT
Ninety percent of all hydraulic leaks occur in the reel hydraulic circuit, mainly due to the necessity of having flexible hoses extending from the front of the machine for the front reels. These hoses see a lot of flexing during the mowing day as cutting units are raised and lowered. Cutting units also steer and float to follow undulations, increasing fatigue for the reel motor hoses.

The 6080A, 6500A, 7500A, and 8000A E-Cut Hybrid Fairway Mowers have eliminated all reel circuit leak points by removing all hydraulics from the cutting unit drive circuit.

BRUSHLESS ELECTRIC REEL MOTORS FOR COMPACT DESIGN AND OPTIMAL EFFICIENCY
The electric reel motors on the 6080A, 6500A, 7500A, and 8000A E-Cut Hybrid Fairway Mowers are brushless, allowing them to be compact in size, roughly equal to that of today's hydraulic reel motors. The brushless motors are very efficient, leading to years of optimal performance with very minimal maintenance, and sealed for protection from the elements. The motors are bidirectional and variable speed, meaning they can spin forward or reverse and at a range of rotational speeds. The motors spin forward for mowing operations and backward for backlapping operations.

A poly-chain belt connects the motor shaft to the reel and rotates the reel when the cutting units are engaged. The internal components of the motor are sealed for long life, durability, and protection from the elements. Cutting units are easily removed from the cutting unit motors by loosening the two bolts securing the motor to the cutting unit, turning the motor approximately a quarter turn, and pulling the motor from the cutting unit. This can be done in a matter of seconds. A tether prevents damage to the wiring harness when the motor is removed.

48-V, 180-AMP ALTERNATOR POWERS REEL DRIVE MOTORS, REQUIRING NO ADDITIONAL BATTERIES ON UNIT
The reel circuit is powered by a 48-V, 180-amp alternator belt-driven by the engine. The alternator supplies constant power to the reel circuit and only generates 48 V when the mow system is engaged.

Due to this design, no additional batteries are required to drive the reel motors on the 6080A, 6500A, 7500A, and 8000A E-Cut Hybrid Fairway Mowers. With traditional electrical mowing systems, the frequency of clip would change as the batteries drained while mowing. A battery pack begins to lose its power immediately when used, but not on the E-Cut Hybrids. Since they still use an engine to drive an alternator, the frequency of clip at the start of the day and at the end of the day is exactly the same, yielding unparalleled quality of cut from start to finish.

Plus, the machine doesn't have to be plugged in to charge the batteries once the day's mowing is done. The only limitation on run time with the E-Cut Hybrids is making sure the operator starts the day with a full fuel tank, just like with any other gas- or diesel-powered machine on the market today. The alternator only supplies power to the reel circuit. The remainder of the circuits are powered by a 12-V battery.

TECHCONTROL DISPLAY MAXIMIZES PERFORMANCE AND UPTIME BY ALLOWING MORE CONTROL IN OPERATION AND DIAGNOSTICS
Passcode-protected TechControl display enables quickly setting or changing mowing speed, turning speed, or transport speed to limit variations in performance by different operators. Quickly adjust the mow or transport speed to make sure mow speed is what is needed for the changing conditions. The setting can be adjusted precisely using a speedometer app on a smartphone or global positioning system (GPS) device.

Use the TechControl to slow the machine during turns while mowing and protect against turf scuffing and aggressive turning operators. The turn speed control engages when in mow and the cutting units are lifted for turns. Once the turn is made and the cutting units are lowered, the machine speed returns to the set mow speed. The turn speed is a percentage of mow speed. When set to 100 percent, turn speed control is off or allows 100 percent of the mow speed in turns. Turn speed setting of 50 percent allows only 50 percent of the set mow speed to be reached during turns.

The A-model PrecisionCut Mowers, E-Cut Hybrid Mowers, and TerrainCut Mowers have the latest in advanced diagnostics through the TechControl display. Most all diagnostics are performed while sitting in the operators seat. The TechControl has onboard visual diagnostics allowing quick and easy machine diagnostics, maximizing up time. The system allows technician to see inputs and outputs of the electrical system. Also, the technician can see stored controller codes on the machine to aide in troubleshooting incidents that may have occurred while on the course. The TechControl will also display the notification for maintenance of the hydraulic and engine oils using service timers to notify when it has reached the time to perform the required service.

eHYDRO HYDROSTATIC PUMP FOR PREMIUM EASE OF USE
The traction system in the A-models is driven by a servo-controlled hydrostatic pump. The control of the pump is no longer mechanical linkages, but instead it is electronic. In total, approximately 94 parts have been eliminated from the traction drive system along with four adjustments compared to prior models. The design reduced the complexity of the drive system, which means no more linkages to adjust or repair, decreased routine maintenance, and more reliable day-in/day-out operation. The operator will like the eHydro pump, too. The pedal effort has been reduced, thus reducing foot fatigue during many hours of mowing.

GRIP ALL-WHEEL DRIVE TRACTION SYSTEM MOVES FLOW FROM WHEELS THAT SLIP TO THOSE THAT GRIP
For superior traction with a true hydraulic four-wheel drive (4WD), the GRIP All-Wheel Drive Traction System is optional equipment for the PrecisionCut and E-Cut Hybrid fairway mowers. This system reduces wheel slip by sending flow from the front wheel to the opposite rear wheel.

For example, if the front right wheel starts to slip, hydraulic flow is diverted to the left rear wheel to maintain positive traction. By allowing the flow to cross over to the opposite rear wheel, the system maintains traction not only while climbing straight up hills, but also on side hills, as well.

The GRIP All-Wheel Drive Traction System is always engaged when driving forward with the PrecisionCut and E-Cut Hybrid fairway mowers. There are no electronics to engage the 4WD system, simplifying the electrical system and the design of the valve at the rear of the machine.

In reverse, a standard switch is provided that disengages 4WD. The switch senses that the reverse pedal has been depressed and shuts off flow to the rear drive wheels. This ensures that the front drive tires are doing the work in reverse rather than the rear tires, minimizing wheel slip and scuffing of turf when backing up an incline.

AutoPedal FEATURE LOWERS SOUND LEVELS AND FUEL CONSUMPTION DURING TRANSPORT
The AutoPedal feature controls engine rpm and transport speed of the machine through the eHydro foot pedal controls. AutoPedal is similar to an automobile gas pedal operation; the more the forward pedal is pressed, the faster the machine moves and the higher the engine rpm; pressing the pedal less, the slower the machine moves and the lower the engine rpm.

On conventional machines, the engine rpm is controlled by the operator by means of a manual or electric/manual throttle. Operators are trained to always operate the engine at wide-open throttle. Running at wide open throttle means running the engine at its fastest speed, which increases the sound levels and fuel usage.

The AutoPedal system allows the engine to only run as fast as needed, meaning that as operators transport around the course, the engine speed is only as fast as needed for the transport speed. If the operator approaches play and stops, the engine rpm goes to idle. This makes transporting quieter and since the engine does not run full speed all the time, it reduces fuel consumption. Once the operator reaches the mowing site, engages the mow switch on the CommandARM controls, the engine rpm automatically increases to full throttle for mowing.

DOUBLE-ACTING, SINGLE-ROD HYDRAULIC STEERING CYLINDER FOR LINES AS STRAIGHT AS A GREENS MOWER
For superintendents who want stripes as straight as they are on the greens, the A-model PrecisionCut Mowers and E-Cut Hybrid Mowers do exactly that. Utilizing the same style steering cylinder as on the 2550 PrecisionCut and 2550 E-Cut Hybrid Riding Greens Mowers, the PrecisionCut and E-Cut Hybrid Mowers can mow the straightest lines of any mower in the industry today.

Traditional hydraulic cylinders have a rod on only one side of the cylinder. The cylinder on the A-models has one rod that goes through both sides of the cylinder. This equalizes volume and pressure on both sides of the cylinder packing, helping the operator make perfectly straight lines with little effort. This system also equalizes the steering effort, meaning easy turns whether turning to the right or to the left.

EASILY ACCESSIBLE DAILY SERVICE POINTS MEAN LESS MAINTENANCE TIME AND MORE TIME WORKING
Easier daily maintenance points are designed into the machine to assist operators with complete daily maintenance and to keep the machine running at peak performance, saving valuable time and money. For ease of service, all daily engine checks are easily accessible by raising the hood. These service points include an engine-oil level check, a coolant level check, hydraulic fluid level, and an air-restriction indicator. The A-model PrecisionCut Mowers, E-Cut Hybrid Mowers, and TerrainCut Mowers feature a radiator screen that is easily removed without tools and a tilt-out oil cooler for easy cleaning.

CUTTING UNITS ARE STABLE AND FOLD INSIDE THE FRONT TIRES FOR EASY TRANSPORTING
The 6500A, 6700A, 7500A, 7700A, and 8700A PrecisionCut and 6500A and 7500A E-Cut Hybrid Fairway Mowers all have cutting units that contact up stops for transport. These up stops are rubber and limit cutting units from swinging during transport. The lift system also folds the two wing units inside the tires to limit possibility of damage to the wing units when transporting through and around objects on the course.

* Engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to engine manufacturers website for additional information.

Any warranty may be limited to months/hours used and varies by model. See your dealer for details.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate

Request a Quote
Year :
2021
Condition :
New
Model Number :
7500A
Request Information
News

John Deere Spring Clinic Tuesday @ 8:30

John Deere Spring Clinic 2018 on Tuesday 8:30 Feb 27 at Cross Implement in Minier. Get the Latest Information on John Deere Equipment . Register to receive a $750 coupon for select John Deere precision ag products.
Read More

Looking to Roll Your Late Model Equipment | Over 150 1 Season Old Units in Stock

We Are the Largest Single John Deere Dealer Location in North America | Low Overhead + High Volume + Unrivaled Quality = Great Deal
Read More

See it. Drive it. Own it. Join us for Drive Green Demo Days

John Deere Equipment Ride and Drive At Cross Implement 703 S Minier Ave Minier IL 61759 Friday Jun 16 8:00am & 5:00pm Saturday Jun 17 8:00am to Noon
Read More