Skip Nav
JOHN DEERE - 610 Back
Request a Quote
Year :
2021
Condition :
New
Model Number :
610
Available Options
shankspacing
12

JOHN DEERE INTEGRAL CHISEL PLOW 610

PICK-UP-AND-GO EASE
The 610 Integral Chisel Plow gives you the good soil breakup and shattering you expect from a chisel plow, plus excellent residue flow all with pick-upand-go mobility only an integral tool can offer.

Good residue flow begins with the 610s 3-bar frame. With 72 in. (1.8 m) of fore/aft clearance and 28 or 32 in. (0.7 or 0.8 m) of underframe clearance, you can work through high-residue fields easily.

Add a coil-tine harrow to level your fields. It offers 12 in. (30.5 cm) spacing between harrow bars and 12 in. (30.5 cm) of underneath clearance for good residue flow.

The 610 features a 4x4-in. (10.2x10.2-cm) tubular mainframe. Welded construction provides tremendous inner strength to withstand the twisting and pulling forces encountered in tough conditions. The result: years of reliable work.

OFFERS A VARIETY OF SIZES AND EXCELLENT RESIDUE FLOW
The 610 Chisel Plow is available in a variety of sizes to help match tractor horsepower and work designs.

STRONG MAINFRAME WITHSTANDS DEMANDING FIELD CONDITIONS
The 610 Chisel Plow features a large 102-mm x 102-mm (4-in. x 4-in.) tubular steel mainframe. Welded construction adds the inner strength that withstands twisting and pulling through demanding field conditions.

CHOICE OF RIGID, TRUPOSITION, AND TRU-DEPTH STANDARDS
RIGID STANDARD:
Is in base equipment on three-section models
Is 32 mm x 51 mm x 711 mm (1.25 in. x 2 in. x 28 in.)
Design is suited for fields having few obstructions
Will till to 203 mm (8 in.) deep
Good clearance to handle heavy trash: 711-mm (28-in.) underframe; 305-mm (12-in.) spacing

TRUPOSITION STANDARD:
Is optional on all models
Cast pivot assembly holds shank firm while working in the soil
Is 32 mm x 51 mm x 711 mm (1.25 in. x 2 in. x 28 in.)
Shank is replaceable without disassembly of the standard assembly
Trip action is suited for fields having rocks or other obstructions: 550-lb trip 711-mm (28-in.) standard will till to 203 mm (8 in.) deep; 711-mm (28-in.) underframe; 305-mm (12-in.) spacing; Trip height of 254 mm (10 in.) for good clearance
Slotted lower hole to aid in removing ground-engaging tools

TRU-DEPTH STANDARD:
Is optional on drawn rigid and select drawn flexible models up to 838 mm (33 ft)
Is 51 mm x 32 mm x 813 mm (2 in. x 1.25 in. x 32 in.); edge is bent for extra strength
Designed to work in rocky ground and heavy draft conditions: Will till to 305 mm (12 in.) deep; Trip height of 279 mm (11 in.); 568-kg (1250-lb) trip force
Excellent clearance to handle heavy trash: 813-mm (32-in.) underframe; 305-mm (12-in.) spacing

IMPLEMENT WARNING LIGHTS ENABLE SAFE TRANSPORT
An implement warning light harness with a turn-signal module for two amber and two red lights are included as standard equipment for safe transport on roads.

THE IMPLEMENT WARNING LIGHT HARNESS REQUIRES ONE OF THE FOLLOWING:
Category 2, 3-point hitch with or without Quik-Coupler
Category 3 and 3N, 3-point hitch with or without Quik-Coupler

HORSEPOWER REQUIREMENTS
The rigid and TruPosition standards require engine horsepower of 6 hp per ft to 10 hp per ft.
The Tru-Depth standard requires engine horsepower of 6 hp per ft to 14 hp per ft.

OPERATOR'S MANUAL STORAGE CONTAINER COMES AS STANDARD EQUIPMENT
A 102-mm (4-in.) diameter container provides storage to give the operator easy access to the manual at the front of the machine. It is made of a durable polyethylene and will keep the manual clean and dry in all weather conditions. The container was designed exclusively for John Deere and the John Deere logo is shown on the lid.

THREE-BAR COIL-TINE HARROW ATTACHMENT AVAILABLE TO FINISH OFF THE FIELD
A handy three-bar coil-tine harrow attachment fits compactly behind the chisel plow. There is 305 mm (12 in.) of fore-aft clearance between the bars plus vertical clearance of 305 mm (12 in.).

NOTE: Use the harrow attachment only on machines equipped with sweeps; do not use with the
Tru-Depth standard.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate

Request a Quote
Year :
2021
Condition :
New
Model Number :
610
Request Information
Available Options
shankspacing
12
News

John Deere Spring Clinic Tuesday @ 8:30

John Deere Spring Clinic 2018 on Tuesday 8:30 Feb 27 at Cross Implement in Minier. Get the Latest Information on John Deere Equipment . Register to receive a $750 coupon for select John Deere precision ag products.
Read More

Looking to Roll Your Late Model Equipment | Over 150 1 Season Old Units in Stock

We Are the Largest Single John Deere Dealer Location in North America | Low Overhead + High Volume + Unrivaled Quality = Great Deal
Read More

See it. Drive it. Own it. Join us for Drive Green Demo Days

John Deere Equipment Ride and Drive At Cross Implement 703 S Minier Ave Minier IL 61759 Friday Jun 16 8:00am & 5:00pm Saturday Jun 17 8:00am to Noon
Read More