Skip Nav
JOHN DEERE - 915 Back
Request a Quote
Year :
2021
Condition :
New
Model Number :
915
Available Options
numshanks
3

JOHN DEERE V-RIPPER 915

RIP COMPACTION TO SHREDS
John Deere rippers give you successful subsoiling without big plugging problems- even in heavy residue.

RIPPLED COULTER BLADES
Slice through surface residue to help reduce plugging with rippled coulter blades.

RIPPERS FOR SMALLER FIELDS AND LOWER HP TRACTORS
For smaller fields and lower-horsepower tractors, choose the 3-shank 913. A soil probe comes standard on the 913 and 915 to help you determine the depth of compaction layers in your fields.

THE STANDARD CHOICE FOR COMPACTION RELIEF
Picking the right standards for your fields can make a big difference when youre fighting compaction.
The standards you select impact numerous performance issues, including the depth at which you rip, the soil types and field conditions you can run in, the effectiveness of weed kill, and the amount of residue disturbance.

EXCELLENT SOIL AND RESIDUE FLOW WITHOUT PLUGGING
The 915 V-Rippers frame positions the shanks for excellent soil and residue flow without plugging.

RIP DEEP WITH GENEROUS UNDERFRAME CLEARANCE
The 915 is available with 5, 7, 9, 11 or 13 standards and you can rip as deep as 23 in. (58.4 cm,) or down to 19 in. (48.3 cm) with optional coulters. Minimum underframe clearance is a generous 35.5 in. (90.2 cm).

RIPPLED COULTER BLADES
Slice through surface residue to help reduce plugging with rippled coulter blades.

SINGLE OR DUAL GAUGE WHEELS
Rugged single or dual gauge wheels on the 915 are available to help you maintain a constant ripping depth. Theyre easy to set with a turnbuckle adjustment.

EXCELLENT RESIDUE-HANDLING ABILITY
John Deere rippers have excellent residue-handling ability as the residue remaining chart shows. The 915 V-Ripper has excellent residue-handling capability in primary tillage at all residue levels. At higher levels, coulters may be required to minimize plugging.

MULTIPLE FRAME SIZES AVAILABLE
The frame is available in 127-mm x 178-mm (5-in. x 7-in.) and 178-mm x 178-mm (7-in. x 7-in.) sizes.

The frame design of the 915 V-Ripper positions standards in a true V-pattern:
Reduces plugging in higher levels of residue
Gives the center standard a leading-edge shattering effect that reduces horsepower requirements over straight bar rippers

127-mm x 178-mm (5-in. x 7-in.) frame models have 10-mm (3/8-in.) thick walls:
Ideal for tractors up to 225 PTO horsepower (hp) and 4WD tractors up to 250 engine hp
Available in five- or seven-standard models
Parking stands are included in base equipment

178-mm x 178-mm (7-in. x 7-in.) frame models have 13-mm (1/2-in.) thick walls:
Ideal for tractors with up to 360 engine hp
Basic frame can be equipped with seven or nine standards
Bolt-on extensions can be added to allow 11 or 13 standards
Parking stands are optional equipment

NOTE: 11-standard size is limited to 508-mm and 635-mm (20-in. and 25-in.) spacings; 13-standard size limited to 508-mm (20-in.) spacing

INTEGRAL HITCH PROVIDES EXCELLENT MANEUVERABILITY
The integral hitch provides excellent maneuverability for tight turns on shorter headlands. The hitch makes it easy to move in and out of buildings.

It is compatible for tractors with Category 2 or Category 3N or 3, 3-point hitches.

The integral hitch can be set to two position:
1 = Low position
Gives maximum transport clearance and allows ripping to approximately 508 mm (20 in.) deep
2 = High position
Enables ripping to a maximum depth of 584 mm (23 in.) with shear-bolt standardsSTRONG V-PATTERN

SINGLE OR DUAL GAUGE WHEELS AVAILABLE
Single or dual gauge wheels are available to help maintain a consistent ripping depth:
9.5L-15, 8 PR tires for good flotation and load bearing when ripping deep
Turnbuckle adjustment for easy setting

COULTER BLADES SLICE THROUGH SURFACE RESIDUE
Rippled coulter blades cut through surface residue such as cornstalks, wheat stubble, or other heavy crops to help reduce plugging.

The ripple on the blade bites into the soil to promote turning the blade in wet and/or firm soil, as well as lighter, drier soils.

Cushion or shear-bolt designs are available.

CUSHION DESIGN
Automatically returns the coulter to the operating position once the obstruction is passed.
Saves time by eliminating the need to stop and replace shear bolts.
Unique rosette bracket used to adjust the coulter depth. Simply loosen one bolt and swing the coulter up or down to the desired height.
Standard does not move, so maximum trash clearance is retained.
Protector bolt (arrow) will yield if the obstruction height exceeds the deflection range of the coulter, thus preventing serious damage to the coulter.
457-mm or 508-mm (18-in. or 20-in.) rippled blades are available for good cutting action. The maximum working depth is as follows:
- For the 457-mm (18-in.) coulter blade, the working depth is 483 mm (19 in.)
- For the 508-mm (20-in.) coulter blade, the working depth is 457 mm (18 in.)

NOTE: When ripping in fields with obstructions, it is necessary to restrict the working depth to give the coulter space to travel over obstructions. Without coulters, the maximum working depth is 584 mm (23 in.) for shear-bolt standard and 559 mm (22 in.) for safety-trip and spring-reset standards.

SHEAR-BOLT DESIGN
Provides economical alternative for protecting coulters in fields with few obstructions.
457-mm, 508-mm, or 559-mm (18-in., 20-in., or 22-in.) rippled coulter blades are available for good cutting action. The maximum working depth is as follows:
- For 457-mm (18-in.) coulter blades, the working depth is 483 mm (19 in.)
- For 508-mm (20-in.) coulter blades, the working depth is 457 mm (18 in.)
- For 559-mm (22-in.) coulter blades, the working depth is 432 mm (17 in.)

SOIL PROBE HELPS TO DETERMINE PROPER OPERATING DEPTH
The soil probe helps operators to determine the proper operating depth of their ripper points, 38 mm (1.5 in.) below the bottom of the compaction layer. The probe allows obtaining the maximum amount of soil fracturing from the entire family of John Deere ripper points. Marked in 51-mm (2-in.) increments from 254 mm to 559 mm (10 in. to 22 in.), the probe provides accurate feedback of compaction layer depth.

It is stored on the mainframe of the ripper for convenient access. The operator's manual explains the proper use of the soil probe.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate

Request a Quote
Year :
2021
Condition :
New
Model Number :
915
Request Information
Available Options
numshanks
3
News

John Deere Spring Clinic Tuesday @ 8:30

John Deere Spring Clinic 2018 on Tuesday 8:30 Feb 27 at Cross Implement in Minier. Get the Latest Information on John Deere Equipment . Register to receive a $750 coupon for select John Deere precision ag products.
Read More

Looking to Roll Your Late Model Equipment | Over 150 1 Season Old Units in Stock

We Are the Largest Single John Deere Dealer Location in North America | Low Overhead + High Volume + Unrivaled Quality = Great Deal
Read More

See it. Drive it. Own it. Join us for Drive Green Demo Days

John Deere Equipment Ride and Drive At Cross Implement 703 S Minier Ave Minier IL 61759 Friday Jun 16 8:00am & 5:00pm Saturday Jun 17 8:00am to Noon
Read More