Skip Nav
JOHN DEERE - 2633 Back
Request a Quote
Year :
2021
Condition :
New
Model Number :
2633

JOHN DEERE THREE- AND FIVE-SECTION TANDEM DISKS 2633

ONE OF THE TOUGHEST GANGS AROUND FOR PRIMARY TILLAGE.
The 2630 Disk is the perfect solution for seedbed preparation in light to medium soils. In medium to heavy soils step up to the 2633 Disk. They feature a knife-edge rolling basket and extended-life bearings, mechanical wing control for side-to-side leveling and mechanical or hydraulic fore-aft leveling.

TruSet gives you the ability to adjust depth, leveling, and basket pressure from the cab on the go.

The 2630 and 2633 Three- and Five-Section Tandem Disks round out the 2630 Series Disks. The 2630 Disks feature one of the largest gang bolts in the industry. No matter what your field conditions are, the gangs on the 2630 Series Disks wont falter. All bolts are designed with an innovative easy-to-tension feature. The 2630 Series also feature C-spring standards that add muscle and delivering a floating
scraper design. This results in consistent disking depth even in hard-packed ground and rocky fields and plug-free performance in heavy residue and wet conditions.

FEATURES
Perfect for medium to heavy soils, seedbed prep, residue sizing/incorporation
Features John Deere TruSet Tillage Technology
Radial Tire Option
Knife-edge Rolling Basket
Extended-Life Bearing

2630 SERIES INCLUDES DISKS FOR LIGHT, MEDIUM, AND HEAVY-DUTY TILLAGE
The John Deere 2630 Series offer three disk models that provide a wide range of variety for all tillage applications.

DIFFERENT BLADE OPTIONS FOR SOIL PENETRATION AND RESIDUE SIZING
John Deere's 2630 Series Disks offer different blade options for soil penetration and residue sizing.

230-MM (9-IN.) BLADE SPACING AVAILABLE FOR 2633 DISK
The 2633 Dual-Purpose Disk comes equipped with front solid- or cutout-spherical blades and rear solid spherical disk blades with 230-mm (9-in.) spacing. The base blade size is 610 mm x 5 mm (24 in. x 0.197 in.).

230-MM (9-IN.) SPACING, FRONT AND REAR
Good for seedbed preparation and chemical incorporation in medium to heavy soils
Works well in primary tillage in light to medium soils
Provides good residue-handling capability

EASILY TENSION DISK GANG BOLTS
John Deere's 2630 Series Disks provide an innovative approach to tension disk gang bolts.

HYDRAULIC FORE-AFT LEVELING ENABLES OPERATORS TO LEVEL DISKS FROM TRACTOR CAB
Hydraulic fore-aft leveling comes as standard equipment with John Deere's 2630 Series Disks. Operators can level the disk from the comfort of the tractor cab.

VARIETY OF RESIDUE MANAGING SOLUTIONS AVAILABLE
As crop yields increase, so does the amount of residue after harvest. The John Deere 2623 and 2625 Disks provide operators with a disk that can be set to prepare a seedbed for planting or set to bury and size tough residue in primary tillage applications.

MECHANICAL WING CONTROL INCREASES FRAME LEVELNESS FOR FIVE-SECTION DISKS
John Deeres mechanical wing control helps producers keep their frames level for five-section disks. Mechanical wing control is included in base equipment for all five-section 2630 Series Disks. With this feature, a large spring is placed in the wing frame on each side of the disk. As the pivot point in the wing starts to raise, the spring presses against that point to keep the disk level through tough field conditions. John Deeres mechanical wing control is an industry-exclusive feature. A five-section disk without mechanical wing control can show up to 75-mm (3-in.) of depth inconsistency across the wing frame.

EXTENDED-LIFE BEARINGS IMPROVE PRODUCTIVITY
John Deeres 2630 Series Disks and Vertical Tillage Implements feature extended-life bearings. These more durable and reliable bearings allow producers to customize bearing maintenance for specific growing conditions and soil types. The flange-mounted bearing and sealing system features improved contamination resistance. The advanced seal material is highly resistant to wear and damage caused by abrasive soils and other crop materials. The design of these are more durable and reliable than previous bearings. The design of this bearing system allows for dynamic self-alignment to the gang bolt, as opposed to trunnion-mounted bearings that have limited alignment capability. This system features additional freedom of movement, accommodating a wider variety of field conditions. The bearing system has been designed to decrease stress and fatigue on the inner rolling surfaces, supporting extended bearing life.

The bearing and seal design allows for a limited, seasonal maintenance interval to minimize downtime. They also allow producers to customize the maintenance for specific growing conditions and soil types. The multi-lipped sealing system cannot be damaged by frequent greasing. It allows bearings to accept grease within the bearing as well as provide grease to the outer bearing surface to eliminate wear between the bearing and housing. With this design, the bearings can accept grease even if misaligned to the housing.

MULTIPLE ENHANCEMENTS MADE TO 2630 SERIES DISKS
The 2630 Series Disks offer multiple upgrades and new items as options versus the 2620 Series Disks to enhance the machine.

EXTENDED-LIFE BEARINGS
John Deeres 2630 Series Disks and Vertical Tillage Implements feature extended-life bearings. These more durable and reliable bearings allow producers to customize bearing maintenance for specific growing conditions and soil type.

TRUSET SIDE-TO-SIDE FEATURE
John Deere TruSet system is featured in base equipment for the 2630 Series Disks and Vertical Tillage Implements. TruSet side-to-side is also available and features individual section leveling.

KNIFE-EDGE HYDRAULIC ROLLING BASKET
The hydraulic rolling basket is now offered with a round bar, flat bar, or knife-edge. The knife-edge is best for heavier, wet soil, and can be used in rocky conditions.

RADIAL TIRES
The 2630 Series Disks and Vertical Tillage Implements feature radial tires for the mainframes in base equipment. Radial tires are available as an option on the wing frame and stabilizer wheels. These tires are designed to offer longer wear life and help minimize compaction with a wider plate and lower inflation pressures.

STABILIZER WHEELS
Producers can choose either mechanical stabilizer wheels or TruSet hydraulic stabilizer wheels as an option. Stabilizer wheels help to maintain a consistent, level depth and are recommended for operation on rolling ground. The mechanical stabilizer wheels can be manually adjusted with a turnbuckle. TruSet with side-to-side leveling capabilities also enables operators to control the TruSet hydraulic stabilizer wheels from the cab while on the go.

Similar models may be shown in addition to the featured model. Equipment may be shown with options.
Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate

Request a Quote
Year :
2021
Condition :
New
Model Number :
2633
Request Information
News

John Deere Spring Clinic Tuesday @ 8:30

John Deere Spring Clinic 2018 on Tuesday 8:30 Feb 27 at Cross Implement in Minier. Get the Latest Information on John Deere Equipment . Register to receive a $750 coupon for select John Deere precision ag products.
Read More

Looking to Roll Your Late Model Equipment | Over 150 1 Season Old Units in Stock

We Are the Largest Single John Deere Dealer Location in North America | Low Overhead + High Volume + Unrivaled Quality = Great Deal
Read More

See it. Drive it. Own it. Join us for Drive Green Demo Days

John Deere Equipment Ride and Drive At Cross Implement 703 S Minier Ave Minier IL 61759 Friday Jun 16 8:00am & 5:00pm Saturday Jun 17 8:00am to Noon
Read More