JOHN DEERE VARIABLE INTENSITY TILLAGE 2633VT
VERTICAL TILLAGE TO MEET YOUR NEEDS
The 2633VT provides you a versatile tool that can be used to complete either primary or secondary tillage. If youre looking to size residue, mix soil and create an ideal seedbed, the 2633VT is the tool for you. With a 21-degree front gang angle and a 19-degree rear gang angle this tool was created to have aggressive sizing and chopping ability in tough residue in the fall and to have finishing characteristics to build an ideal seedbed in the spring. The active hydraulic rolling baskets smooth and level the soil profile. With the 2633VT, you can run the rolling baskets (available with a round bar, flat bar or knife-edge basket) in three different positions:
Raised- raise the baskets in harsh, muddy conditions
Float- float the baskets to lightly fluff soil
Apply down pressure- adjust the basket pressure to provide consistent contact with the ground, provide a firm seedbed and shatter root balls.
Get your bearings and get improved productivity and less maintenance Want bearing maintenance that you can customize for specific field conditions and soil types? Now you can. The 2630 Series Disks and Vertical Tillage implements, 2660VT, 2720 and 2730 Rippers all feature extended-life bearings, which are more durable and reliable than our previous bearings.
You can customize the maintenance for specific growing conditions and soil types. The bearing design allows for dynamic self-alignment to the gang bolt, rather than the limited alignment capability of trunnion-mounted bearings.
The advanced seal material is highly resistant to wear and damage caused by abrasive soil and residue, making it more durable and reliable than previous bearings. The flange-mounted bearing and sealing system features improved contamination resistance.
The multi-lipped sealing system is not damaged by frequent greasing. It allows the bearing to accept grease within the bearing as well as provide grease to the outer bearing surface to eliminate wear between the bearing and housing.
SIX SIZES AVAILABLE TO FIT RIGHT MACHINE TO ANY SIZE OPERATION
The John Deere 2633VT offers six different sizes to fit any size operation, big or small.
UNIQUE BLADE CONFIGURATION ON 185-MM (7.25-IN.) SPACING OPTIMIZES ONE PASS SIZING AND MIXING
John Deere's 2633VT comes equipped on 185-mm (7.25-in.) spacing with solid shallow concavity spherical blades on the front gang and solid shallow concavity wavy blades on the rear gang to size residue and mix soil. A majority of the sizing is going to be done by the front gang, and the rear gang is going to do the mixing. John Deere designed its vertical tillage tool to chop stalks to an acceptable size and begin soil mixing for breakdown, yet leave a considerable amount of residue on the cover. The 2633VT comes equipped with 185-mm (7.25-in.) spacing on the front and rear gang. Both blade sizes on front and rear gang are 560 mm x 5 mm (22 in. x 0.197 in.). Optional 560-mm x 6.5-mm (22-in. x 0.256-in.) blades are available on front gang only.
FRONT SOLID SHALLOW CONCAVITY SPHERICAL BLADE
Chops and sizes residue
Manages root balls
Removes field ruts
REAR SOLID SHALLOW CONCAVITY WAVY BLADE
Mix soil and residue
FRONT AND REAR 185-MM (7.25-IN.) SPACING
Ideal for seedbed preparation
Maximizes chemical incorporation
EASILY TENSION GANG BOLTS
John Deere's 2633VT Vertical Tillage tool provides an innovative approach to tension gang bolts.
HYDRAULIC FORE-AFT LEVELING ENABLES OPERATORS TO LEVEL MACHINE FROM TRACTOR CAB
Hydraulic fore-aft leveling comes as standard equipment with John Deere's 2633VT Vertical Tillage tool. Operators can level the machine from the comfort of the tractor cab.
VERSATILE DESIGN OF GANG ANGLE MANAGES RESIDUE IN FALL AND SPRING CONDITIONS
Whether the plan is to use the 2633VT in the spring or fall, this machine was designed to handle any residue management situation. With a 21-degree angle on the front gang and 19-degree gang angle on the rear gang, this tool was created to have aggressive sizing and chopping ability in tough residue in the fall and to have finishing characteristics to build an ideal seedbed in the spring. Shallow gang angle vertical tillage tools can leave a wavy, washboard effect unsuitable for a proper seedbed. The 2633VT implement has an aggressive gang angle to help anchor residue, manage weeds and root balls, and create an even, smooth seedbed under the topsoil.
ACTIVE HYDRAULIC ROLLING BASKETS CREATE IDEAL SEEDBED
The 2633VT offers an active hydraulic rolling baskets that give the operator wide-ranging adjustability for a variety of conditions. The drawbars and rolling basket on the rear harrow are built with strength in mind for demanding vertical tillage conditions.
MULTIPLE ENHANCEMENTS MADE TO 2630 SERIES DISKS
The 2630 Series Disks offer multiple upgrades and new items as options versus the 2620 Series Disks to enhance the machine.
John Deeres 2630 Series Disks and Vertical Tillage Implements feature extended-life bearings. These more durable and reliable bearings allow producers to customize bearing maintenance for specific growing conditions and soil type.
TRUSET SIDE-TO-SIDE FEATURE
John Deere TruSet system is featured in base equipment for the 2630 Series Disks and Vertical Tillage Implements. TruSet side-to-side is also available and features individual section leveling.
KNIFE-EDGE HYDRAULIC ROLLING BASKET
The hydraulic rolling basket is now offered with a round bar, flat bar, or knife-edge. The knife-edge is best for heavier, wet soil, and can be used in rocky conditions.
The 2630 Series Disks and Vertical Tillage Implements feature radial tires for the mainframes in base equipment. Radial tires are available as an option on the wing frame and stabilizer wheels. These tires are designed to offer longer wear life and help minimize compaction with a wider plate and lower inflation pressures.
Producers can choose either mechanical stabilizer wheels or TruSet hydraulic stabilizer wheels as an option. Stabilizer wheels help to maintain a consistent, level depth and are recommended for operation on rolling ground. The mechanical stabilizer wheels can be manually adjusted with a turnbuckle. TruSet with side-to-side leveling capabilities also enables operators to control the TruSet hydraulic stabilizer wheels from the cab while on the go.
Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate
JOHN DEERE VARIABLE INTENSITY TILLAGE 2633VT