Skip Nav
JOHN DEERE - 2330 Back
Request a Quote
Year :
2021
Condition :
New
Model Number :
2330

JOHN DEERE MULCH FINISHER 2330

NEXT LEVEL PERFORMANCE IN HEAVY RESIDUE
The 2330 Mulch Finisher aggressively cuts residue, sizing up to 80% of it and mixes it to help deliver the planter-ready seedbed you need for enhanced seed placement and germination.

Redesigned from below the ground up. The 2330 delivers a smooth field finish on the surface and the disks and sweeps slice, mix and condition the soil to produce an even, uniform field finish below the surface. This creates the perfect environment for your seeds to take root and thrive. Up to 127 more acres (11 ha) a day. Compared to our previous model, the new 2330 Mulch Finisher can help you cover more ground every day. Sizes to fit your operation. Starting at 21 ft. 9 in. (6.6 m) and extending up to 56 ft. 3 in. (17.1 m), you have a wide range of working widths to help create the planter-ready seedbed you want. When you combine these choices with the 10-mph (16 km/h) working speeds, youll cover more acres per day.

Durable frame design. The frame has been enhanced from front to back. One spring pass lets you slice and mix residue, root out weeds, and level the soil. Shank spacing helps leave smooth, level seedbed. The true 9-in. (23-cm) split-the-middle spacing provides more space for residue to flow and minimizes plugging. Narrower transport frame. Despite the wider working width, the 2330 is 5% more narrow than our previous model on the transport width for better on-road transport.

DETAILS
Working widths from 21 ft, 9 in. to 56 ft, 3 in. (6.6 to 17.2 m)
Excellent residue handling capabilities
Lattice-style frame design
Hydraulically adjustable rolling baskets

LEVEL-LIFT FRAME ENSURES EVEN OPERATION THROUGH ALL OPERATING DEPTHS
The Level-Lift hitch ensures a level operation through all operating depths. It also provides consistent gang and sweep depth fore to aft for thorough seedbed preparation. This quick, easy adjustment ensures a flat seedbed floor and level soil profile for planting. The combination of the disk gang, sweep, and harrow functions promotes consistent and uniform chemical placement and mixing. The T-hitch enables easy turnbuckle adjustment for fast tractor changeover and quick implement leveling fore to aft. The heavy-duty T-hitch allows for tighter turning, decreasing the amount of headlands required for quick turns on the end. The T-hitch also houses the hoses and wiring harness, protecting them from crop and incidental tire contact.

LOW-CONCAVITY DISKS ARE SPACED FOR EFFECTIVE RESIDUE SLICING
The producer can work ground faster with the 2330's 508-mm x 5-mm (20-in. x 0.197-in.) low-concavity disk blades and outside blades tapered to 457 mm (18 in.):
Allows aggressive cutting action
Minimizes ridging

BLADES ARE SPACED 184-MM (7.25-IN.) APART AND ARE FIXED AT AN 8-DEGREE GANG ANGLE
Results in effective slicing in heavy residue
Moves the soil inward toward the center of the implement for a level seedbed

C-SPRING CUSHION GANGS HELP PROTECT AGAINST ROCKS AND OTHER OBSTRUCTIONS IN THE FIELD. DURA-FLEX (3+1) BEARINGS ARE STANDARD EQUIPMENT:
Triple lip on the inner race and a wide seal between the outer race and flange prevents soil from entering between the bearings and flanges, and helps retain lubrication in the bearings
Greaseable for long life

ALL DISK GANGS FEATURE COMBINATION RIGID/SELF-ADJUSTING SCRAPERS AS STANDARD EQUIPMENT:
Prevent soil buildup on inside of disk blades
Adjustable to compensate for wear
Self-adjusting operationthe spring tension helps hold the scrapers against the disk blade in sticky soil conditions

ENGAGED DISK GANGS ADD TO THE STABILITY OF THE IMPLEMENT AT HIGHER GROUND SPEEDS FOR CONSISTENT WORKING DEPTH IN UNEVEN GROUND.
Allow for good weed kill and tilling
Provide excellent chemical incorporation

TRUPOSITION STANDARDS DELIVER 91 KG (200 LB) OF TRIP FORCE FOR CONSISTENT DEPTH AND EVEN CUT
Producers are working ground at faster speeds and in tighter soil conditions, requiring more from standards and frames. The 91-kg (200-lb) trip TruPosition standards include:
Heat-treated mounting bracket
Cast pivot assembly with front stop
19-mm x 45-mm x 610-mm (3/4 x 1-3/4 x 24-in.) C-shank, retained by a bolt through the casting and U-boltensures consistent sweep depth, level seedbeds in all secondary conditions, and thoroughly incorporated chemicals
610-mm (24-in.) underframe clearance provides extra room for excellent residue flow on 229-mm (9-in.) spacing
254-mm (10-in.) trip height (at shank) clears rocks and obstacles
Replaceable split-tension sleeve and chrome bushing extend life of standard and implement

REAR HITCH COMPATIBLE WITH ALL 2330 CONFIGURATIONS AND REAR HARROWS
A substantial rear hitch is available to give the 2330 the versatility to pull the 200 Seedbed Finisher or other tow-behind attachments. The rear hitch includes:
Rectangular tube construction
Telescoping hitch
Serviceable drawbar
453-kg (1000-lb) tongue weight rating
13,000 gross vehicle weight (GVW) rating for five-section machines; 10,000 gross vehicle weight (GVW) rating for three-section machines
Wiring harness for transport lights
Hydraulic hoses and couplers

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate

Request a Quote
Year :
2021
Condition :
New
Model Number :
2330
Request Information
News

John Deere Spring Clinic Tuesday @ 8:30

John Deere Spring Clinic 2018 on Tuesday 8:30 Feb 27 at Cross Implement in Minier. Get the Latest Information on John Deere Equipment . Register to receive a $750 coupon for select John Deere precision ag products.
Read More

Looking to Roll Your Late Model Equipment | Over 150 1 Season Old Units in Stock

We Are the Largest Single John Deere Dealer Location in North America | Low Overhead + High Volume + Unrivaled Quality = Great Deal
Read More

See it. Drive it. Own it. Join us for Drive Green Demo Days

John Deere Equipment Ride and Drive At Cross Implement 703 S Minier Ave Minier IL 61759 Friday Jun 16 8:00am & 5:00pm Saturday Jun 17 8:00am to Noon
Read More