Skip Nav
JOHN DEERE - 725D Back
Request a Quote
Year :
2021
Condition :
New
Model Number :
725D
Available Options
width
25.5

JOHN DEERE DRAPER PLATFORM 725D

FEATURES
TWO AVAILABLE SIZES FOR A 700D FACTORY-INSTALLED CENTER FEED DRUM IMPROVES FEEDING OF CROP INTO THE COMBINE FEEDERHOUSE
The center feed drum is designed for efficient and consistent feeding of the crop into the combine feederhouse. Beginning with model year 2020 700D Draper Platforms, customers will have the ability to choose between a 356-mm (14-in.) or 406-mm (16-in.) center feed drum to be factory installed.

FEATURE BENEFIT:
356-mm (14-in.) or 406-mm (16-in.) diameter factory-installed feed drum significantly improves feeding of the crop
Strategic location improves crop handling and capacity, increasing productivity in high-volume crops such as irrigated wheat, barley, or canola
Combine performance is improved due to retractable fingers that enable smoother feeding
Capacity increase in tough conditions by 20 percent due to an upgraded center feed section slip clutch

FUNCTIONALITY:
The feed drum protrudes forward from the draper back sheets, improving the crop handoff from the draper side belts. An increase in slip clutch torque of the center feed drum from 1200 Nm to 1650 Nm allows for increased capacity in tough crop conditions
In some crop conditions, crop can hesitate at the corners of the feed drum but the retractable drum fingers keep the crop moving into the combine.

DUAL-KNIFE DRIVE SYSTEM IS TIMED
The unique dual-knife drive system is timed, creating the smoothest-possible reciprocating knife-drive system currently in the industry. The positive, reliable shaft-driven dual epicyclical in-line knife drives with built-in driveline protection, provide operators with the strongest knife-drive system.

DOUBLE-CUT KNIFE SYSTEM PRODUCES A CLEANER CUT
All John Deere 700D Drapers include a double-cut knife which features a hydraulic tilt that is controlled from inside the cab. All 10.6-m (35-ft) and 12.1-m (40-ft) draper cutterbars have knifeback reinforcement straps to strengthen the knifeback.

FEATURE BENEFIT:
Maximized productivity through longer stroke of knife section provides a faster, cleaner, and smoother cut, which allows operators to harvest at faster ground speeds
Productivity is maximized in tough conditions through a reinforced knifeback that strengthens the cutterbar
Reduced cost of operation and increased wear life with hardened sickle sections and unique boron treatment
Hydraulic tilt optimizes the cutterbar angle for varying conditions, extending the harvest day and providing the lowest-possible cut height

FUNCTIONALITY
The 100-mm (4-in.) cutting action produces a cleaner cut versus the tearing effect of shorter-stroke cutting systems. Knife hold-downs are easily adjusted to help maintain harvesting performance.
The cutterbar hydraulic tilt adjusts a full 8 degrees while maintaining excellent visibility to the cutterbar throughout the tilt range. For improved ease of use, the hydro handle can be configured to control the platform tilt.

REEL RESUME AND REVERSE ARE FEATURES ON THE 700D DRAPERS
Reel resume and reverse are features on the 700D Drapers. The combine operator can store two different reel positions with one setting for normal conditions and another for down, tangled, short, or leaning crops.

FEATURE BENEFIT:
Added time savings and convenience with saved reel positions, lowering operator fatigue
Increased harvest efficiency through a reel-reverse feature which reverses the reel in conjunction with the center feed drum and belt to back outplugs

DRAPER FEEDING OPTION FOR THE 700D
A draper feeding option is available for model year 2018 that will be offered for the full 700D Rigid Draper lineup. This option code will include larger top crop augers with the necessary hydraulic components and mounting hardware as well as an improved seal kit to keep the grain in the draper and not left on the ground.

Feature benefit:
Smoother feeding in tough crop conditions from a 50 percent increase in top crop auger diameter
Increased performance in tough feeding crops with twice the torque on top crop auger motors
45 percent reduced center-feed section losses

Functionality:
The top crop auger has been increased in size from 304.8 mm to 457.2 mm (12 in. to 18 in.) with deeper auger flighting to give increased control in bushy crop conditions. This results in even feeding to the center feed drum, which creates a smooth transition to the feederhouse. The seal kit for the center feed section has added rubber seals on both sides of the center feed drum, preventing losses from grain falling outside of the center feed drum.

Specifications are subject to change without prior notice.
Similar models may be shown in addition to the featured model. Equipment may be shown with options.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate

Request a Quote
Year :
2021
Condition :
New
Model Number :
725D
Request Information
Available Options
width
25.5
News

John Deere Spring Clinic Tuesday @ 8:30

John Deere Spring Clinic 2018 on Tuesday 8:30 Feb 27 at Cross Implement in Minier. Get the Latest Information on John Deere Equipment . Register to receive a $750 coupon for select John Deere precision ag products.
Read More

Looking to Roll Your Late Model Equipment | Over 150 1 Season Old Units in Stock

We Are the Largest Single John Deere Dealer Location in North America | Low Overhead + High Volume + Unrivaled Quality = Great Deal
Read More

See it. Drive it. Own it. Join us for Drive Green Demo Days

John Deere Equipment Ride and Drive At Cross Implement 703 S Minier Ave Minier IL 61759 Friday Jun 16 8:00am & 5:00pm Saturday Jun 17 8:00am to Noon
Read More