Skip Nav
JOHN DEERE - X570 Back
Request a Quote
Year :
2021
Condition :
New
Model Number :
X570
Available Options
horsepower
24

JOHN DEERE X570 GREAT LAWN CARE STARTS HERE

Get total control of your turf. The X500 Series has Accel Deep Mower decks in two sizes, multiple features that help you power through any condition, and a 4-year/500-hour bumper-to-bumper warranty (see your dealer for details) because this is more than just grass, it's where memories are made.

X500s mow where you need to go, and do heavy-duty work, too. Their wide stance enhances stability on hillsides. Traction can be increased simply by pressing the foot-operated traction control. Heavy-duty frames work with ground-engaging equipment like tillers and blades. And features like the on-board deck-leveling gauge assure a quality cut every time. And the optional MulchControl Kit makes feeding your lawn easy.

KEY FEATURES
48-in. or 54-in. Accel Deep Mower Deck
Easy mulching with optional MulchControl Kit (one-touch or from deck versions)
Powered by 24 hp (17.9 kW)* iTorque Power System
Twin Touch hydrostatic transmission
Smooth, rounded contours present a modern, styled appearance
4-year/500-hour bumper-to-bumper warranty. See your dealer for details.

ADDITIONAL FEATURES
ENGINE IS SMOOTH RUNNING AND RELIABLE V-TWIN AIR-COOLED DESIGN
The tractor is powered by a John Deere iTorque power system
24 hp (17.9 kW)
Large 726 cc displacement
V-twin air-cooled design
Excellent power and performance
Smooth, quiet power
Easy starts
Cast-iron cylinder liners
Overhead valves
Full-pressure lubrication
Replaceable oil filter
Dual-stage air cleaner
Solenoid-shift starter for easy starts, even in cold weather

THE ACCEL DEEP MOWER DECK CUTS CLEAN AND IS VERSATILE
The Accel Deep Deck uses the latest in three-spindle mowing technology to raise performance to a higher level
10-gauge, 0.135-in. (3.4-mm) deck stamping for long life
Deep, flat-top deck design to handle a large volume of material at faster mowing speeds
Gives excellent cut quality and uniform discharge
Easy to keep clean on top of and under the deck
Resilient four-point mounting system suspends mower from tractor for a smooth and level cut
Wide mower wheels easily adjusted just above ground level to help prevent scalping
0.25-in. (6.4-mm) cut-height increments allow mower to be set at the desired cut height
Onboard deck-leveling system makes keeping mower properly adjusted easy
Compatible with optional MulchControl mulching system
Compatible with high-performance Power Flow material collection systems
4.83-in. (12.3-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging performance
Optional lever-action or electric one-touch MulchControl attachment provides superior mulching performance and versatility
Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance
Mower deck is suspended from the vehicle for a smooth and level cut
Adjustable mower wheels, positioned just above ground level, help reduce scalping

KEY FEATURES OF THE DRIVE SYSTEM
Large pump and motor rotating groups for long life and efficient operation
Full-length axle housings to support heavy loads
Twin Touch foot control for easy and precise change of speed and direction
Internal wet-disk brakes for long life and consistent operation
Brake interlock system that returns the foot control pedals to neutral during panic stops
Return mechanism that closes the freewheeling valve when the brake pedal is depressed to start the engine
Replaceable oil filter for extra protection for tractors equipped with hydraulic lift and steering

LEVER-ACTION OR ELECTRIC ONE-TOUCH MulchControl OPTIONS ARE AVAILABLE FOR EXTRA MOWING CONVENIENCE
Lever-action or electric one-touch MulchControl attachment is available for Accel Deep 42-in. (107-cm) (42A), 48-in. (122-cm) (48A), and 54-in. (137-cm) (54A) Mower Decks used on ZTrak Mowers, S240 Tractors, and X300 and X500 Select Series Tractors.
In mulch mode, it controls clippings dispersion in unwanted areas (driveways, landscape beds, near buildings, windows, parking lots, etc.)
Reduces cleanup time needed to dispose of clippings
Reduces the amount of material entering a material collection system because, even in the side discharge mode, MulchControl will mulch about one third of the material due to the additional baffles under the mower deck and the unique design of the mulching blades

STEERING IS LOW-EFFORT SECTOR AND PINION SYSTEM
Tight, 22-in. (56-cm) turning radius provides excellent maneuverability
Tight turning ability improves mowing efficiency
Larger, 14-in. (35.6-cm) diameter steering wheel improves leverage for easier turns
Larger sector gear improves (increases) the steering ratio
Higher steering ratio equals lower steering effort
Dual drag links help equalize steering loads and greatly reduce steering error
Ball joints are provided on both ends of the steering tie rods
Long steering arms improve the mechanical advantage of the steering system though the full range of motion
Steering wheel/pinion gear shaft turns on a sealed ball bearing at the pinion gear
Gives easy steering
Long steering system life
Sector gear pivots on a shaft rather than a bushing to ensure proper gear mesh and eliminate binding
Upper and lower ends of the sector-gear shaft pivot on sealed ball bearings

FRAME IS FORMED FROM HEAVY-DUTY STEEL AND WELDED FOR RELIABILITY
Frame is formed from 12-gauge, 0.105-in. (2.66-mm) thick material
Rear hitch plate is formed from 0.25-in. (6.4-mm) steel and completes the frame assembly
Rear hitch plate can support up to four 42-lb (19-kg) Quik-Tatch weights
Optional front bumper for the X570 Tractor can support up to four 42-lb (19-kg) Quik-Tatch weights

SNOW REMOVAL AND YARD CARE IS A STRENGTH OF LAWN TRACTORS
An advantage of lawn tractors is their ability to use attachments for snow removal and other yard-care chores. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.

Equipment available for snow removal includes:
44-in. (112-cm) Snow Blower for X570 Tractor
47-in. (119-cm) Snow Blower for X580, X584, and X590 Tractors
48-in. (122-cm) Front Blade
Tire chains or TerraGrip traction belts
Weather enclosure
Weights

* The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturers web site for additional information.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate

Request a Quote
Year :
2021
Condition :
New
Model Number :
X570
Request Information
Available Options
horsepower
24
News

John Deere Spring Clinic Tuesday @ 8:30

John Deere Spring Clinic 2018 on Tuesday 8:30 Feb 27 at Cross Implement in Minier. Get the Latest Information on John Deere Equipment . Register to receive a $750 coupon for select John Deere precision ag products.
Read More

Looking to Roll Your Late Model Equipment | Over 150 1 Season Old Units in Stock

We Are the Largest Single John Deere Dealer Location in North America | Low Overhead + High Volume + Unrivaled Quality = Great Deal
Read More

See it. Drive it. Own it. Join us for Drive Green Demo Days

John Deere Equipment Ride and Drive At Cross Implement 703 S Minier Ave Minier IL 61759 Friday Jun 16 8:00am & 5:00pm Saturday Jun 17 8:00am to Noon
Read More