Skip Nav
JOHN DEERE - E170 Back
Request a Quote
Year :
2021
Condition :
New
Model Number :
E170

JOHN DEERE E170 RUN WITH US ON A 100 SERIES LAWN MOWER

Built in Greeneville, Tennessee, the 100 Series takes the hassle out of yard work. With affordable prices, comfortable designs, and our most comprehensive warranty, you'll have complete peace of mind while working on your turf. Because this is more than just grass, it's home.

The Edge Mower Decks are stamped out of high-grade steel with a rounded design to leave no corner or edge for grass to get stuck in. This helps the cut grass to travel easily through the deck and supports an even dispersal for a quality cut.

KEY FEATURES
25 HP* V-Twin extended life series engine
Deep deck design with three blades lifts grass for a superior cut
Easy Change 30-Second Oil Change System for fast and convenient service

ADDITIONAL FEATURES
EASY CHANGE 30-SECOND OIL CHANGE SYSTEM
Weve changed the oil change. The John Deere Easy Change 30-second oil change system makes changing the engine oil easy, quick, and clean. Changing the oil is as easy as twisting on a new oil-filled filter. Oil does not need to be drained from the engine. The John Deere Easy Change filter is an additional engine oil reservoir. Changing the filter removes the captured contaminants and replaces about 0.8 qt (0.76 L) of the engine oil. Only from John Deere. Included on the E120, E130, E150, E160, E170, and E180 models.

ENGINE IS POWERFUL AND SMOOTH-RUNNING V-TWIN DESIGN
A 25-hp (18.6-kW) V-twin engine provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions:
V-twin cylinder design for greater torque, lower vibration, and improved sound quality
Auto choke to allow operators to start the engine without needing the choke unless air temperatures are near or below freezing
Electronic ignition for fast starts
Spring-return feature to ensure the operator will not mistakenly leave the throttle lever in the choke position
Cast-iron cylinder liners for longer engine life
Overhead valves for excellent power and fuel economy
Full-pressure lubrication and oil filter for cleaner oil, prolonging engine life and extending the time between oil changes
Includes extended-life series (ELS) engine features for enhanced performance and longer life

CONVENIENT FUEL-FILLER OPENING
The fuel tank gauge shows how much fuel is in the tank and can be seen without leaving the operator's seat
Easy to check fuel level
Convenient location
The capacity is 2.4 U.S. gal. (9.1 L)
The fuel-filler opening is conveniently located under the seat
Filling the tank without spilling is easy
A tethered fuel tank cap is more convenient
The sealed fuel cap helps keep vapors inside the tank
The tractor has a California Air Resources Board (CARB) certified engine for reduced air pollution

FULL-FEATURED ENGINE IS MORE RELIABLE AND LASTS LONGER
Overhead valve (OHV) design for cooler operation and longer valve life
Contains an advanced debris management system that directs cooling air through the rotating screen to the air cleaner compartment, where large debris is pre-filtered through ejector slots
Keeps unfiltered air out of the engine through a large, dual-sealed, premium oval-shaped cartridge-style filter
Ensures maximum protection for extended engine life with the premium air cleaner, a pleated paper filter with a foam precleaner
Captures fine particles for maximum protection and extended maintenance
Provides maximum protection with full-pressure lubrication system
Pumps oil by a mechanical gerotor-style pump to all critical engine components
Enhances the system through a premium automotive-style oil filter, which removes over 95 percent of oil contaminates
A premium bearing package for improved durability; includes a super-finished crank pin bearing with a 50% smoother surface to increase load capacity by 35 %
Uses a premium DU Teflon-coated bearing
Helps resist wear and increases durability through self-lubricating bronze bearing
Wear-resistant, chrome-plated valve stems for long-life valves
44 percent smoother for longer life
Cast-iron cylinder sleeve for extended life
Dependable float-feed type carburetor with integral fuel pump
High-capacity fuel filter for dependable operation
Includes John Deere Easy Change 30-second oil change system for making it easy, quick, and clean to change the oil
Maintenance-free electronic ignition for quick, dependable starts
Platinum spark plugs for extended life

FRAME MADE OF FULL-LENGTH WELDED STEEL FOR RELIABILITY
The solid one-piece frame is constructed of 12-gauge, 0.105-in. (2.66-mm) steel
Full-length, robotically-welded frame design has high-strength steel rails for added strength and long life
One-piece, steel fender deck is bolted to the frame
The front axle is constructed of solid cast iron that will not bend
Automotive-like steering system with sector and pinion steering gears and single drag link with a tie rod provides a very strong, low-effort, and tight-turning system
Three grease fittings, on both steering spindles and center pivot, allow for regular lubrication to help maintain easy steering and minimize wear
Large, 0.75-in. (1.9-cm) diameter wheel spindles provide excellent durability
The CargO Mount system is a combination of front- and rear-mounting points providing convenient and easy installation of the sun canopy, rear bagger, and other attachments

SNOW REMOVAL IS A STRENGTH OF LAWN TRACTORS
An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.

Equipment available for snow removal includes:
44-in. (112-cm) Snow Blower
46-in. (117-cm) Front Blade
Tire chains or TerraGrip traction belts
Weather enclosure
Weights

HYDROSTATIC TRANSMISSION GIVES AN INFINITE CHOICE OF GROUND SPEEDS
A Kanzaki Tuff Torq hydrostatic transmission gives an infinite choice of speeds and makes changing the direction of travel easy. Side-by-side foot pedals control the speed and direction of travel. Appropriate transmissions are used in each model, depending on rear tire size and tractor performance requirements, to ensure excellent performance and reliability.
Automotive-type accelerator controls ensure easy operation
Operator can change direction without lifting foot off the platform
Large pedal surface gives superior operator comfort

THE OPERATOR STATION IS DESIGNED FOR OPERATOR COMFORT AND EASY OPERATION
Controls are positioned where they are easy to reach and easy to use to control the tractor.
Steering wheel is positioned and angled to give the operator plenty of room and steering comfort
Seat is tilted back at the optimum angle to provide the most comfortable operator position
Controls are easy to see and use
A deluxe, 14-in. (35.6-cm) steering wheel provides greater operator comfort and control
Ignition switch is on the dash for starting ease
Wide footrest areas with non-slip, anti-vibration floor mats are provided for operator comfort
Debris-removing channels help keep the footrest area clean and dry
The wide footrest makes it easier to step over the mower deck while entering or exiting the seat
A 15-in. (38.1-cm), high-back, deluxe operator seat provides good support and lumbar adjustment for extra operator comfort
Two long seat springs give plenty of seat travel to smooth out the ride, keeping the operator comfortable while operating the tractor
Seat can be tilted forward for protection from the elements and to provide easy access to the fuel tank
Storage compartment and beverage holder, located on the right side fender, are conveniently located and easy to use
Handgrips give extra comfort for the operator, especially when operating on hillsides

* The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturers web site for additional information.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate

Request a Quote
Year :
2021
Condition :
New
Model Number :
E170
Request Information
News

John Deere Spring Clinic Tuesday @ 8:30

John Deere Spring Clinic 2018 on Tuesday 8:30 Feb 27 at Cross Implement in Minier. Get the Latest Information on John Deere Equipment . Register to receive a $750 coupon for select John Deere precision ag products.
Read More

Looking to Roll Your Late Model Equipment | Over 150 1 Season Old Units in Stock

We Are the Largest Single John Deere Dealer Location in North America | Low Overhead + High Volume + Unrivaled Quality = Great Deal
Read More

See it. Drive it. Own it. Join us for Drive Green Demo Days

John Deere Equipment Ride and Drive At Cross Implement 703 S Minier Ave Minier IL 61759 Friday Jun 16 8:00am & 5:00pm Saturday Jun 17 8:00am to Noon
Read More