Skip Nav
JOHN DEERE - 4066M HEAVY DUTY Back
Request a Quote
Year :
2020
Condition :
New
Model Number :
4066M HEAVY DUTY
Available Options
differentiallock
yes
drive
MFWD
fueltype
Diesel
horsepower
65.9
rops
yes
wheeltype
Tires

JOHN DEERE 4066M HEAVY DUTY - COMPACT UTILITY TRACTOR

THE POWER OF 4. UNLEASHED
The new 65.9 HP (48.5 kW) 4066M Heavy Duty tractor is all strength and versatility. To the power of 4. The standard eHydro Transmission, four work lights and low Roll Over Protection Structure (ROPS) hinge point on these open station models allow for efficient work in dim, tight spaces, while the standard Category 1, 2 Three-point Hitch can fit a wide array of attachments without any costly aftermarket enhancements to switch between the two. Perfect for poultry houses, landscapers, and cow calf operations.

HIGHLIGHTS:
Factory-installed 440R Quick Park Loader Mounting System included
Turbocharged diesel engine
eHydrostatic Transmission
Standard mid and rear hydraulics
Category 1 and 2, Three-point hitch

WHATS STANDARD IS STRONG AND REMARKABLY VERSATILE
Independent PTO with modulated engagement. A modulated, wet disk clutch engages the PTO. Simply pull up on the yellow knob and the PTO gently engages.
The four work lights. To illuminate any low light environment, like a poultry house, for example.
The big tires with the deep tread. Designed for work in muck and mud. The lug capacity is strong. For when slipping and sliding is not an option.
The category 1, 2 Three-Point Hitch. Simplifies implement management. Switch out Category 1 implements and Category 2 implements quickly and easily without hard-to-manage add-ons.
The Factory Installed Hydraulics. Toward the rear and right side for exceptional all-around tractor and implement performance.
The Roll-Over Protection System (ROPS) with a low hinge point. Lower to clean areas in poultry houses or other low-clearance areas. Raise for your safety.
The eHydro Transmission. With TwinTouch forward/reverse pedals, LoadMatch to prevent stalls while lifting, SpeedMatch to slow max speeds for precision tasks, MotionMatch to protect turf from stops and starts, eThrottle for fuel efficiency and noise and Cruise Control. Just like a car.
Rugged, rust and dent-resistant composite hood. Leave the dents and rust that expose your engine to the elements to metal hoods.
The Brush Gard and Front Weight Support. For protection and to be ready for when you need weight up front to counterbalance heavy implements in the back if your front loader is off.

FEATURES:
INCREASED VERSATILITY WITH CATEGORY 1 AND 2 IMPLEMENT COMPATIBILITY
The rear hitch on 4M Heavy-Duty Tractors provides producers with implement versatility to perform in a variety of applications. Attaching implements is convenient with telescoping draft links and Category 1 and 2 hitch balls in base equipment. The mechanical hitch control also features a depth stop and a rate of drop adjustment. This feature provides consistency when lowering the hitch. Each time the position control lever is pushed forward, it stops where the depth stop has been positioned. This is valuable to anyone who desires consistent, level ground.

The 3-point hitch has plenty of lift capacity to handle heavy implements.

Category 1 and Category 2 hitches allow for hookup of a variety of 3-point hitch implements.
Right-hand lift link and center-link are adjustable to save time when leveling equipment.

3-POINT HITCH CONTROL
The 3-point hitch control on the 4M Heavy-Duty Series Tractors is called position control.
Operates precisely with no jerking or leak down
3-point hitch lever features easy-to-read increments for accurate positioning and an easy-to-adjust depth stop control
The S-hook is provided to secure the center-link when hitch is not used

RATE-OF-DROP/STOP VALVE
Rate-of-drop/stop valve regulates lowering speed of 3-point hitch. It can be shut off completely to stop hitch movement.

TELESCOPING DRAFT LINKS (EXTENDABLE DRAFT LINKS)
Telescoping draft links will reduce the amount of effort to attach 3-point hitch implements by allowing the operator to make small adjustments without moving the tractor. It is standard on 4M Heavy-Duty Tractors.

Horizontal sway bar stabilizers regulate side-to-side sway of 3-point-hitch-mounted equipment.
4M Heavy-Duty Tractors come equipped with the horizontal stabilizer bars, the lock pin goes into the stabilizer bar vertically
Mounted on outside of lower links for fast, easy equipment hookup
Top-pull pin design allows easy adjustment without use of tools
Retainer cable holds pin while pin is removed to adjust stabilizers

Rockshaft position control lever allows operator to accurately set implement depth or height.
Operates precisely with no jerking or leak down
Control lever features easy-to-read increments for accurate positioning

Easy-to-adjust depth stop enables the operator to lower implement to a predetermined depth.

EXCELLENT VISIBILITY PROVIDED BY STANDARD LIGHTING EQUIPMENT

Standard equipment lighting includes:
Wraparound-style wide-angle halogen headlights for better lighting and visibility
Premium integrated automotive-style headlight bezels
Two amber flashing warning lights
Warning lamps placed to meet ASAE S279.10 standards
Dual lamps with increased separation for better visibility and distinction at a distance
Two fender-mounted forward and rear halogen working lights

MAXIMIZE PRODUCTIVITY WITH AN eHYDRO TRANSMISSION
The tractor is available with a three-range electronic hydrostatic (eHydro) transmission.
Fluid under pressure transmits engine power to the drive wheels using a pump and motor
Functions both as a clutch and transmission
Provides high torque for startup
Reduces powertrain shock loads

Danfoss supplies both the pump and motor. This ensures that the components are matched to each other, providing maximum efficiency.

The electronic hydrostatic transmission is ideally suited for jobs where productivity is a must, such as loader or mower applications.

Twin Touch foot controls allow the operator to select both directions of travel and speed with a touch of the toe.

Key features of the eHydro transmission:
Infinitely variable ground speeds, in each range, allow the operator to match the speed of the tractor to the job.
No clutching means fast and easy direction changes.
Twin Touch foot pedals provide quick and easy forward/reverse operation.
Cruise control is standard equipment:
Cruise control switch is located on the right-hand console for easy access.
Cruise control is electronically engaged and disengaged, which allows for precise setting of speed.

Danfoss eHydro transmission is used for reliable operation. Durability features include:
Large forged trunnion shaft with larger support bearings that reduce vibration and noise
Center section made from ductile iron (much stronger than grey iron used in many competitive transmissions)
Transmission oil cooler cools transmission oil for longer transmission life

Safety features of the eHydro transmission include:
The tractor will start with one or both foot pedals depressed, but it will not move until both pedals first return to neutral.
Operator presence system means the tractor will come to a stop if the operator leaves the seat but will not shut off unless the power take-off (PTO) is also running.

KEY JOHN DEERE ADVANTAGE
John Deere's Twin Touch foot controls offer key advantages over competitive hydro model tractors.
Some competitive hydrostatic tractors use a treadle pedal designed (toe-heel) foot control for operation of the hydro.
Requires the operator to use both toe and heel to change direction, resulting in increased operator fatigue

INTEGRATED EHYDRO FEATURES
The eHydro convenience controls have been integrated into a single module. Combining features such as SpeedMatch LoadMatch, MotionMatch, eThrottle, and automotive-style cruise control pulls the maximum efficiency out of the eHydro transmission tractors. All these features are standard on the 4M Heavy Duty and 4R models and deliver customers an easier and more comfortable experience.
Press button to active/deactivate eThrottle. When eThrottle is activated, depression of the travel pedal increases engine rpm and tractor speed.
Press button to active/deactivate LoadMatch. When LoadMatch is activated, engine will not stall during heavy load applications.
Press button to activate/deactivate SpeedMatch. When SpeedMatch is activated, operator is able to set the desired maximum travel speed.
Press button to activate/deactivate cruise control. When cruise control is activated, operator is able to set cruise speed.
Press button to set cruise speed, or to decrease cruise/set max speed.
Press button to resume set cruise speed, or to increase cruise/set max speed.
MotionMatch - longer accelerate and decelerate distances.
MotionMatch - shorter accelerate and decelerate distances.
eThrottle indicator - Press a button to activate/deactivate eThrottle. When eThrottle is activated, depression of the travel pedal increases engine rpm and tractor speed simultaneously. This provides the operator with comfort and convenience as well as fuel economy.

AUTOMOTIVE-STYLE CRUISE CONTROL
Cruise control indicator - An automotive-style cruise control is standard equipment on the 4M Heavy-Duty and 4R Series Tractors. Cruise control is electronically engaged and disengaged and is located on the right-hand operator console.
Maintains desired forward speed without pressure on the foot pedal
When activated, the operator is able to set cruise speed:
Use the SET/- button to set cruise speed, or to decrease cruise/maximum speed
Use the RES/+ button to set cruise speed, or to increase cruise/maximum speed
A speed sensor also allows the tractor to maintain preset speed driving up and down hills
To disengage the cruise control, either:
Apply pressure to the brakes
Disengage cruise control button
Briefly depress the reverse travel pedal

LOADMATCH POWER MANAGEMENT SYSTEM
LoadMatch is a standard feature on the 4M Heavy-Duty and 4R Series Tractors.

If torque requirements increase significantly, the transmission will reduce the tractor's drive speed to compensate for the increased load on the transmission, maximizing torque to drive wheels and minimizing stalls.

Controls automatically adjust LoadMatch compensation depending on the tractors application. PTO applications require less engine speed fluctuation, therefore adjusting the amount of droop depending on PTO speed. This adjustment increases efficiency and optimizes engine speed and torque output based on tractor application.

While typically left on, LoadMatch can be turned off with the right-hand console controls.

MOTIONMATCH

MotionMatch, standard on the 4M Heavy-Duty and 4R Series Tractors, is located on the right-hand console. It offers seven settings for adjusting the rollout or decelerating when the pedal is released.

SpeedMatch, standard on the 4M Heavy-Duty and 4R Series Tractors, further enhances the eHydro cruise control functions by allowing the operator to preset maximum speed. Once this feature is engaged, the operator must stroke the travel pedal fully to meet the operators preset speed and press the Set button to lock the speed. From there, the operator can use the automotive-style cruise controls to adjust speed. This function will improve accuracy and safety, particularly at lower travel speed applications.

Rotary tilling or spraying applications are examples of where SpeedMatch can be applied. SpeedMatch will work in both the forward and reverse set speeds.

INCREASE PRODUCTIVITY WITH INTEGRATED MID-MOUNT LOADER SELECTIVE CONTROL VALVE (SCV) AND SINGLE REAR SCV

The tractor is base equipped with a dual mid SCV.
Two sets of right-hand side-mounted couplers allow operating four hydraulic functions (such as raising/lowering boom and curling/dumping bucket).
Large 12.7-mm (0.5-in.) diameter couplers are used for maximum oil flow to implements.
Hydraulic valves have excellent featherability for smooth operation of equipment.
Couplers are color coded for correct hookup.
Hydraulic regenerative (REGEN) active, in dump position, out of neutral:
Provides faster dump cycle
Prevents cylinder voiding

REAR HYDRAULIC COUPLERS - SCVS
The tractor is also base equipped with a single third electrohydraulic SCV.
One set of rear mounted couplers allow operating rear mounted hydraulic implements.
Large 12.7-mm (0.5-in.) diameter couplers are used for maximum oil flow to implements.
Hydraulic valves have excellent featherability for smooth operation of equipment.

OPTIONAL REAR HYDRAULIC COUPLERS - SCVS
Power beyond

POWER BEYOND KIT
Optional on the 4M Heavy-Duty Series Tractors, the power beyond kit:
Contains rear-mounted couplers and hoses to access pressurized oil at the rear of the tractor; the kit will be used for operations such as backhoe or log splitters.
Couplers are a 12.7-mm (0.5-in.) diameter for maximum oil flow to implements.

SCV CONTROLS
Single control lever (A) makes operation of loader or other implements fast and simple.
SCV safety lock lever (B) allows the operator to control the type of SCV lever movement needed for a particular operation or situation.
The SCV safety lock lever allows loader hydraulics to be locked out so the boom and bucket will not drop if SCV lever is accidentally bumped.
The SCV safety lock lever allows loader hydraulics to be locked out so the bucket will not dump if SCV lever is accidentally bumped.

POWERFUL YANMAR DIESEL ENGINE DELIVERS PLENTY OF POWER UNDER HEAVY LOADS
The Yanmar diesel engine has a high-torque reserve that provides plenty of power under heavy load.
This 4-cylinder engine features lower levels of exhaust emissions and reduced noise levels. It meets Environmental Protection Agency (EPA) Final Tier 4 (FT4) emission standards.

The engine uses the latest technology to optimize fuel economy, improve control and accuracy, and reduce environmental impact.

The common rail system (CRS) optimizes fuel economy and reduces operating costs compared to engines not using CRS technology. High-pressure injection atomizes fuel into finer particles which burn more completely. It results in improved fuel economy and lower cost of operation.

The electronic control unit (ECU) provides optimum fuel control and accuracy. ECU monitors and controls the engine. It continuously monitors engine conditions and adjusts the fuel delivery accordingly to ensure optimum performance and emissions.

The engine comes with an aftertreatment system. The system operates automatically. The exhaust filter consists of a diesel particulate filter (DPF) which captures particulate matter (PM) contained in the exhaust gas. Using a natural cleaning process, most of the PM trapped in the exhaust filter is eliminated by the heat of the exhaust stream generated by normal use. In situations of low temperature, engine speed or load factor, an active cleaning cycle is initiated. In this cleaning cycle, the exhaust gas temperature is raised by injecting additional fuel during the exhaust stroke of normal vehicle operation to the diesel oxidation catalyst (DOC). After many hours of use, the exhaust filter may require an ash removal service.

DPF CLEANING
Depending on the load that the tractor is under, as well as ambient temperature, humidity, and engine speed, the DPF may build up with particulate matter, thus requiring cleaning. Filter cleaning is determined by one of three conditions:
A prescribed time-based estimation of needed filter cleaning
DOC/DPF pressure sensors
A particulate matter buildup estimation based on load conditions

Once one of the three conditions have been met, filter cleaning will occur.

There are three different types of filter cleaning processes:
Passive filter cleaning
Active filter cleaning
Parked filter cleaning

PASSIVE FILTER CLEANING
Passive filter cleaning occurs naturally when the engine is generating enough heat to oxidize particulate matter. This automatic process occurs continuously during normal operating conditions. No tractor icons or symbols appear on the display during passive filter cleaning.

NOTE: Passive filter cleaning requires no operator involvement, and there is no interruption to tractor operation.

ACTIVE FILTER CLEANING
If conditions (temperature, load, or speed) for passive filter cleaning cannot be achieved, then PM is removed using active filter cleaner. To achieve the required conditions, exhaust temperature management (ETM) manages the initiation and duration of active filter cleaning. ETM can adjust numerous engine parameters and/or inject a small quantity of fuel into the exhaust stream for a short duration. The fuel turns to vapor and chemically reacts with the catalysts in the DOC to create heat to oxidize PM.

It is important to note that at no time is the fuel in the DOC/DPF ignited, and there is no flame within the DOC/DPF.

Like passive filter cleaning, active filter cleaning requires no operator involvement, and there is no interruption to tractor operation.

PARKED FILTER CLEANING
In some instances where passive and active filter cleaning have not fully cleaned the PM from the system, a parked filter cleaning may need to take place. Most likely, the only time a parked filter cleaning will need to occur is when automatic filter cleaning has been disabled for an extended period of time and multiple warnings to engage filter cleaning were ignored or if the tractor has been used during light load conditions. Additionally, when the automatic filter cleaning process has been deliberately interrupted multiple times, or if active filter cleaning has failed numerous times due to a failed component, a parked filter cleaning may be requested. In these rare instances the operator will have to park the tractor and start the filter cleaning process.

The parked filter cleaning process needs to be activated based on usage and operation of the tractor. The process will take approximately 30 minutes. See operators manual for more details.

This system constantly monitors the soot level of the tractor, making sure the tractor is always in peak performance condition. This ensures high performance at all times.

NOTE: Number of hours since last regeneration and soot level percentage viewable on LCD display.

KEY FEATURES OF THE ENGINE ARE:
Lower rated speed for 540 rpm power take-off (PTO) operation means better fuel economy, less noise and vibration, and longer overall engine life
Cast-in-block cylinder design for good cooling and long life
Hydraulic lifters are quieter and require no adjustment
Heavy-duty crankshaft provides more bearing surface area for added durability
CRS optimizes fuel economy, lowering the cost of operation
ECU provides optimum control and accuracy
Direct fuel injection
o Improves starting
o Injects fuel directly on top of pistons for more efficient combustion
o Develops more horsepower per gallon of fuel
o Glow plugs (cold starting aid)
Engine oil cooler, cools engine oil for longer engine life
Key start and shutoff eliminates fuel shutoff knob
o Electric solenoid shuts fuel supply off immediately when key is turned off
See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
o Sealed radiator compartment keeps trash and debris on outside of hood
Dry-type air cleaner with safety element and electronic air service indicator
o Electronic air restriction indicator alerts operator when air filter servicing is required
o Dual-element design for added engine protection
o Easy to service
Standard side exhaust
Discharges fumes away from the operator, reducing engine noise
Improves operator visibility when using a loader or front implement
Optional vertical exhaust
Yanmar is a trademark of Yanmar Company Limited.

IMPROVED TRACTION IN MUDDY CONDITIONS WITH LARGER TIRES
Rain or shine, your work needs to get done. The 4M Heavy-Duty Tractor comes with larger, tougher tires to help keep you moving no matter what the weather brings.
Offers two rear tire size options:
16.9-24 (8PR, R4 Industrial, two-position)
19.5L-24 (10PR, R4 Industrial, two-position)
Allows for better traction in wet and muddy conditions
Has a higher ply rating, which allows for better control and comfort when carrying heavy loads

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate

Request a Quote
Year :
2020
Condition :
New
Model Number :
4066M HEAVY DUTY
Request Information
Available Options
differentiallock
yes
drive
MFWD
fueltype
Diesel
horsepower
65.9
rops
yes
wheeltype
Tires
News

John Deere Spring Clinic Tuesday @ 8:30

John Deere Spring Clinic 2018 on Tuesday 8:30 Feb 27 at Cross Implement in Minier. Get the Latest Information on John Deere Equipment . Register to receive a $750 coupon for select John Deere precision ag products.
Read More

Looking to Roll Your Late Model Equipment | Over 150 1 Season Old Units in Stock

We Are the Largest Single John Deere Dealer Location in North America | Low Overhead + High Volume + Unrivaled Quality = Great Deal
Read More

See it. Drive it. Own it. Join us for Drive Green Demo Days

John Deere Equipment Ride and Drive At Cross Implement 703 S Minier Ave Minier IL 61759 Friday Jun 16 8:00am & 5:00pm Saturday Jun 17 8:00am to Noon
Read More