Skip Nav
Request a Quote
Year :
Condition :
Model Number :


Advanced Engine System
Superior Terrain Capability
Deluxe Cargo Box Versatility

The machine is powered by an 812-cc (49.6-cu in.), 3-cylinder, dual overhead cams, liquid-cooled, four-cycle gasoline engine. It produces 6.5 kgm (47 lb-ft) of torque at 3200 rpm. The advanced electronic controls and fuel-injection system deliver superb starting, idling, and throttle response during operation.

38.8 kW (52 hp*) at 6000 rpm
71-km/h (44-mph) top speed
Electronic fuel injection for superb performance, altitude adjustment, and cold-weather starting (tested to -28.9C [-20F])
Electronic ignition is continuously variable for optimum engine power and provides fast, reliable starts
Overhead valve design provides greater efficiency and fuel economy
Full-pressure lubrication system
Spin-on oil filter with drain bracket and oil drain plug enable easy servicing
Dry, replaceable, single-element air cleaner with remote intake
See-through coolant recovery tank permits the operator to check the coolant level without having to remove the radiator cap
Open radiator compartment for air flow
Standard high-capacity alternator - 85 amps for maximum accessory capability

To complement the most capable frame available in a high-performance utility vehicle, the XUV is equipped with four-wheel independent suspension. A dual A-arm front and rear suspension provides a smooth ride over challenging terrain and excellent hauling characteristics. The entire suspension system has been optimized to handle no cargo to maximum cargo without compromising ride quality or vehicle stability.

Dual A-arm front suspension features include:
203.2 mm (8 in.) of travel provides ample compression and wheel extension, which keep all four wheels on the ground for superior traction and vehicle control
17.5-mm (0.6875-in.) solid anti-roll bar with fully rubber isolated connecting links and pivots for minimal vehicle body roll and quiet operation
Heavy-duty, nodular cast-iron knuckles to support the strut, constant-velocity (CV) shaft, and wheel
Maintenance-free rubber torsional A-arm pivots for long life and quiet operation
CV shaft protection from sticks that may puncture the rubber boot

Dual a-arm independent rear suspension features include:
Unequal length, dual A-arm construction for superior wheel control and travel
228.6 mm (9 in.) of total travel provides ample compression and wheel extension, which keep all four wheels on the ground for superior traction, excellent ride quality, and vehicle control
Coil-over shocks absorb the most demanding terrain
A-arms made from square/rectangular tubing reduce weight while remaining rigid
Heavy-duty, nodular cast-iron uprights support wheel loads with a double row of ball bearings
CV driveshaft protection from sticks that may puncture the rubber boot
Rear sway bar for lateral stability

The Gator XUV Crossover Series Utility Vehicle has a precision-engineered drivetrain system that fully utilizes engine power, optimizing acceleration, hauling, towing, and hill-climbing capabilities. Power is transmitted from the engine through a continuously-variable clutch system to the transaxle.

Key elements of the drive system include:
The variable-speed drive consists of two clutches and a drive belt. The drive clutch is attached to the engine. The driven clutch is attached to the transaxle.

Features include:
The engine braking system utilizes a tight belt for operation, requiring an idler sleeve on the primary clutch for neutral. The secondary clutch is a new build-on-shaft design that utilizes a cam to tune the acceleration and deceleration of the vehicle. The clutch will stay engaged, providing deceleration until approximately 5 km/h (3 mph).
The continuously variable transmission (CVT) air intake draws in 50 percent more air versus previous designs to reduce heat and the amount of water ingestion into the CVT system. The system will reduce belt slippage and improve durability.
o A low- and high-speed forward gear offering:
o Low range is 0 km/h to 43 km/h (0 mph to 27 mph), XUV825E and XUV825M S4
o Low range is 0 km/h to 24 km/h (0 mph to 15 mph), XUV855E and XUV855M S4
o High range is 0 km/h to 71 km/h (0 mph to 44 mph), XUV825E and XUV825M S4
o High range is 0 km/h to 51 km/h (0 mph to 32 mph), XUV855E and XUV855M S4
Ability to creep along slowly to maneuver in tight spaces
Standard full-clutch enclosure with high speed fan provides longer belt and clutch life
High-ratio clutches with three cam weights for maximum belt clamp load in high-torque conditions
Powertrain reduction ratios:
o The complete reduction ratios range for high gear is 8.6:1 at top speed and 42:1 at initial clutch engagement. This varies between the vehicles listed above.
o The complete reduction ratios range for low gear is 17.9:1 at top speed and 86.8:1 at initial clutch engagement. This varies between the vehicles listed above.

NOTE: Delivery and torque to the ground depends on tire size, which is a function of nominal size and pressure.

How the variable-speed drive works:
As engine speed increases, the spring-loaded drive clutch is closed by weights being forced out by centrifugal force.
As the drive clutch closes, the belt rides up to the largest diameter of the drive clutch and forces open the driven clutch.
With the belt running in the smallest diameter of the driven clutch, the speed being transferred to the transaxle is increased.
The driven clutch is designed to sense varying loads (inclines, mud, etc.) and constantly adjusts drive speed upward or downward so that engine rpm remains optimal.

Transaxle, mechanical front-wheel drive (mfwd), and constant-velocity (cv) shafts
Operator interface
On-demand true four-wheel drive (4WD) system with an auto-locking front differential and dash-mounted electronic rocker switch is best in class; when the rocker switch is in the on 4WD position, the front differential will automatically lock for extra traction when needed, but when the rocker switch is in the off two-wheel drive (2WD) position, the vehicle will remain in 2WD
o Provides exceptional traction in challenging conditions
o Maintains turf-friendly operation in 2WD mode
o Illuminated for visibility in low-light conditions
o Two-speed, fully-enclosed, oil bath transaxle allows for superior pulling ability
o Cast-aluminum design is the most robust in the industry
o Helical forward and reverse gears are used for quiet operation
o Rear traction assist (differential lock) is built in and can be engaged on demand
Allows locking the rear drive wheels together
Provides increased traction in tough spots
NOTE: Differential design reduces scuffing of the turf during turns because it allows the inside wheels to turn slower than the outside wheels
o Neutral start safety interlock for engine ignition system
o Large, sealed bearings are located inside the housing for better protection and durability
o Contains gear case for transferring power to the MFWD
o Splined shaft interfaces for maximum torque transfer and durability
o All drive gears machined from highest grade gear steel
o Protected by a skid plate
o Electronic design is auto-locking for ease of use
Performs like a locking differential when engaged, but like an open differential when cornering
Offers positive engagement of both front wheels in forward and reverse as a differential package
Automatic engagement on the flyno shift linkages required
o Protected by a skid plate and frame
Drive shafts
o Rear CV shaft diameter measures 27 mm (1.1 in.) and is designed for peak engine and braking torque
o Front CV shaft diameter measures 23.9 mm (0.94 in.) and is designed for peak engine torque
o Propshaft (transaxle to MFWD shaft) diameter measures 23 mm (0.91 in.) and is designed for peak engine torque
o All CV shaft and propshaft joints are maintenance free and protected by exclusive Neoprene boots for durability

The deluxe cargo box consists of a 15 percent glass-filled polypropylene composite material that eliminates rust, dents, and reduces noise.

Deluxe Cargo Box Tailgate - The tailgate can be opened or removed for easier cleanout and to carry longer items. The tailgate has been improved, features truck-like performance, and can be operated with one hand.

The standard-installed lanyards can also be removed to lower the tailgate to 150 degrees for convenient loading and unloading tasks.

The deluxe cargo box is easier to latch, unlatch, raise, and lower with the integrated handle design and gas assist.

A prop rod is provided to hold the box in the upright position for operator convenience, as well as to limit box pivot travel.

The deluxe cargo box offers integrated tie-down points for increased versatility. Tie-down points are located in the following areas:
Four corners inside the cargo box bed
Four points on the load guard directly behind the operator station
Tie-down bars on either side of the cargo box
Six points on the underside of the cargo box frame

The deluxe cargo box easily converts to a flat bed. The flatbed configuration allows loading larger cargo.

Optional accessories for the deluxe cargo box include:
Factory-installed brake and taillight with protector
Factory-installed spray-in liner (not shown)
Improves skid resistance and surface abrasion protection
Cargo box bed mat
Cargo box power lift

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate

Request a Quote
Year :
Condition :
Model Number :
Request Information

John Deere Spring Clinic Tuesday @ 8:30

John Deere Spring Clinic 2018 on Tuesday 8:30 Feb 27 at Cross Implement in Minier. Get the Latest Information on John Deere Equipment . Register to receive a $750 coupon for select John Deere precision ag products.
Read More

Looking to Roll Your Late Model Equipment | Over 150 1 Season Old Units in Stock

We Are the Largest Single John Deere Dealer Location in North America | Low Overhead + High Volume + Unrivaled Quality = Great Deal
Read More

See it. Drive it. Own it. Join us for Drive Green Demo Days

John Deere Equipment Ride and Drive At Cross Implement 703 S Minier Ave Minier IL 61759 Friday Jun 16 8:00am & 5:00pm Saturday Jun 17 8:00am to Noon
Read More