JOHN DEERE 730FDHYDRAFLEX DRAPER
Industry-exclusive HydraFlex technology
30-foot operating width
Available steel reel tine for working in tougher crops
Available dual knife drive
INDUSTRY-EXCLUSIVE HYDRAFLEX TECHNOLOGY ON 700FD
The 700FD Series HydraFlex Draper Platform features HydraFlex, an industry-exclusive hydraulic float system allowing for superior ground following capabilities over a wide range of crops and conditions.
The HydraFlex system hydraulically controls the float of the cutterbar by the turn of a knob in the cab for ease of operation
Provides exceptional cutterbar flexibility throughout the entire working pressure range for increased machine performance
Unique cutterbar float arms offer a dual purpose, allowing for superior ground-following capabilities plus support to the cutterbar and draper belts for increased productivity
DUAL KNIFE DRIVE IS TIMED
Dual knife drive is standard on 700FD HydraFlex Draper Platform for harvesting rice, tough crop, and wet or green crop conditions. This unique dual knife drive system is timed, creating the smoothest possible reciprocating knife drive system currently in the industry.
Positive, reliable, power take-off (PTO) shaft and driven, dual epicyclical in-line knife drives with built-in driveline protection provides producers with the strongest knife drive system in the industry.
NOTE: Single-knife drive is available on the 730FD, but increased cutterbar vibration may occur.
INCREASED VERSATILITY AND PRODUCTIVITY WITH A DUAL-POSITION FEED DRUM
The 700FD now comes standard with a dual-position drum. This allows the operator to select an upper or lower setting, equivalent to a 40.6-cm (16-in.) drum and 35.6-cm (14-in.) drum, respectively. All 700FD Draper Platforms will ship from the factory with the drum in the 40.6-cm (16-in.) position, which is the standard position. For bushy crops, such as canola, putting the drum in the upper position will allow a greater throughput.
A feature for 700FD Draper Platforms is a feed drum retractable auger finger to improve crop feeding at the corners of the feed drum. In some crop conditions, the crop can hesitate at the corners of the feed drum, and the retractable drum fingers keep the crop moving into the combine. This results in smoother feeding and better performance of the combine.
CONTROL BELT SPEED, SIDE BELT SPEED REDUCTION AND INTEGRATED BELT PROTECTION ALL FROM THE CAB
The speed of the side draper belts can be controlled by an adjustment on the CommandARM controls from within the cab. Combine software gives operators the option to slow down the side belts to a fixed speed with a push of a button on the CommandARM. Additionally, a draper belt protection system is integrated into the 700FD HydraFlex Draper Platform family to minimize side belt damage should slippage occur.
Optimal performance in varying crops and conditions through side draper belt speed that ranges from 22.6 m/min to 228 m/min (74 fpm to 748 fpm) and shows on the display in the cab
The center draper belt speed is fixed at 288 m/min (944.9 fpm) for optimal feeding to the combine feederhouse
Speed sensors monitor the speed of the idler rollers and should major slippage be experienced, the belts will shut off and an operator warning is shown on the 4600 CommandCenter display
Side belt speed reduction is designed to improve draper performance when the operator is not harvesting the full platform width or when coming out of a headland
Increased uptime as the side belt speed reduction feature is engaged/disengaged from the CommandARM controls
TOP-CROP CONVEYING AUGER KEEPS BUSHY CROPS MOVING INTO THE FEEDERHOUSE
The 700FD HydraFlex Drapers offer an optional 45.7-cm (18-in.) top-crop conveying auger extending the full width of the draper to help bushy crops, especially heavy canola, feed evenly into the feederhouse.
Maximum productivity due to smooth feeding of bushy crops such as canola that stall over the side draper belts
Minimum time and effort required to install for bushy crops or remove for traditional crops for optimal performance in both conditions
Available as a stand-alone option or as part of the draper feeding option with the center section seal kit for maximum performance in canola
Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate
JOHN DEERE 730FDHYDRAFLEX DRAPER