Skip Nav
JOHN DEERE - MX8 Back
Request a Quote
Year :
2020
Condition :
New
Model Number :
MX8
Available Options
batwing
no
width
96

JOHN DEERE MX8MEDIUM DUTY ROTARY CUTTERS

THE MX SERIES DOUBLE-DECK DESIGN DELIVERS STRENGTH AND LASTING BEAUTY
Built with the John Deeres patented double-deck design, the MX Rotary Cutters are ready for tough mowing. Thats because the double-deck design provides more strength and better material flow. There are five models, all are ready to zip through tall grasses, tough weeds, and brush up to 2 inches (17.8 cm) in diameter.

UNIQUE DESIGN KEEPS THESE CUTTERS RUNNING BETTER, LONGER
The MX Rotary Cutter models will fit perfectly into a wide variety of farms, properties, and landscape maintenance firms. These John Deere rotary cutters look different because they have the double-deck design a design that adds strength, durability, and provides improved crop flow.

The smooth, dome-shaped top deck sheds water and debris, while the flat bottom deck absorbs the punishment from rocks, stumps, flying objects. The bottom deck absorbs the abuse, so the top deck stays nice and smooth - no dents, no dings, no holes.

The internal supports, sandwiched between the top and bottom decks, add to the frames strength, and are key to the smooth and obstruction-free MaxFlow cutting chamber. Since the MaxFlow cutting chamber is free of obstructions, theres better crop flow and better distribution of cut material.

MX8
Standard safety chain shields
Standard stump jumper blade holder
3-point hitch quick-coupler (Category 2)
Industry-exclusive Double-Decker frame design

John Deere rotary cutters lead the way with innovative design, superior performance, and proven durability. Valuable features are included such as the Double-Decker design and Max Flow cutting chamber, which prevent water and debris from accumulating on the smooth, dome-shaped top deck while the flat bottom deck absorbs the punishment from rocks and stumps. The top deck stays smooth - no dents, no dings, no holes. The internal supports sandwiched between the top and bottom decks are key to the smooth and structure-free Max Flow cutting chamber, while at the same time provide added strength and durability.

To help promote safe operation, John Deere rotary cutters are equipped with front and rear safety-chain shields. John Deere rotary cutters continue to advance in value with larger, more powerful gearboxes, redesigned blade holders, and updated constant-velocity (CV) drivelines (special to the flex-wing models).

HERE ARE SITUATIONS WHEN A ROTARY CUTTER IS NEEDED
Clipping pastures encourages grass growth, optimizing on valuable pasture acreage.
Cutting grass and stocks helps control insects.
Routine cutting keeps weeds from reseeding.
It is the most cost efficient way to cut roadsides, parks, cemeteries, airport fields, hydro, gas, and telephone easements, and all other types of open properties.
Cutting grass waterways encourages root development and helps prevent erosion.
Knocking down stalks is essential in no-till and minimum-till fields.
Shredding stalks such as cotton, corn, and milo speeds up decomposition.
Clearing out brush is easy.
Use a rotary cutter to control undergrowth and grass in orchards, vineyards, and groves.

INDUSTRY-EXCLUSIVE DOUBLE-DECKER FRAME DESIGN
The patented Double-Decker design provides strength and superior cutting performance while reducing top deck rust. Two welded decks, each 3-mm (1/8-in.) thick, form the upper and lower surfaces of the rotary cutter frame.
Internal stiffeners are sandwiched between the two decks, providing superior strength and rigidity.
The top deck is domed. Water, grass, and crop debris tend to roll off the deck, reducing water buildup and deck rust. The domed shape and smooth profile of the top deck also make the deck easier to clean when trash does build up in adverse conditions.
The bottom deck is the main defense against rocks and field debris. Therefore, the top deck is continuously protected from impacts and tends to retain its smooth form.
Because the stiffeners are located between the two decks, the underside of the bottom deck is perfectly smooth; there are no structural frame members to interrupt airflow. This improves both cutting performance and distribution.
Standard material flow deflectors help channel the cut material, further improving material distribution.

DRIVELINE WITH SLIP CLUTCH HELPS PROTECT IT AGAINST OVERLOADS
Rubber element connecting drivelines help absorb the sudden stress of impact loads. Chain couplers are used to maintain the driveline alignment.
A non-seize slip clutch used between the primary gearcase and power take-off (PTO) helps protect the driveline. Slip clutches feature a spring-compression adjustment used to ensure clutches are not seized.
Lift-type and semi-mount models feature an ASAE Category 4 driveline for added durability.
The pull-type model uses an equal-angle driveline for smoother, rattle-free turns.
A lightweight driveline with a lock-slide collar makes it fast and easy to attach.
The driveline provides long lubrication periods; a 50-hour cycle reduces maintenance time, making the cutting operation more efficient.

FRONT AND REAR SAFETY CHAIN SHIELDS ARE STANDARD
Offer protection during operation yet allow uncut material to pass into the cutting chamber with minimal restriction

STANDARD STUMP JUMP BLADE HOLDER PROVIDES PROTECTION AGAINST IMPACTS
Round-pan blade holders (stump jumpers) are provided as standard equipment on most John Deere rotary cutter models. Stump jumpers increase the drivetrain reliability by providing protection against impacts such as stumps, rocks, and other obstacles.

FIVE-YEAR LIMITED GEARBOX WARRANTY PROVIDED ON EVERY JOHN DEERE ROTARY CUTTER
John Deere is so confident in the reliability of the gearbox, the warranty has been extended. John Deere rotary cutters come with a 5-year limited gearbox warranty.
There is also 1-year warranty on the complete machine, as well as drivelines and other components.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate

Request a Quote
Year :
2020
Condition :
New
Model Number :
MX8
Request Information
Available Options
batwing
no
width
96
News

John Deere Spring Clinic Tuesday @ 8:30

John Deere Spring Clinic 2018 on Tuesday 8:30 Feb 27 at Cross Implement in Minier. Get the Latest Information on John Deere Equipment . Register to receive a $750 coupon for select John Deere precision ag products.
Read More

Looking to Roll Your Late Model Equipment | Over 150 1 Season Old Units in Stock

We Are the Largest Single John Deere Dealer Location in North America | Low Overhead + High Volume + Unrivaled Quality = Great Deal
Read More

See it. Drive it. Own it. Join us for Drive Green Demo Days

John Deere Equipment Ride and Drive At Cross Implement 703 S Minier Ave Minier IL 61759 Friday Jun 16 8:00am & 5:00pm Saturday Jun 17 8:00am to Noon
Read More