Search
Inventory

John Deere 1025R

25HP Premium Compact Utility Tractor

John Deere 1025R

Let Us Put You in the Seat

 

Save Up to $1,500

 

 

 

Was $14,301 | Now From $12,900

 

 

*0% APR for 84 Months Available*

 

The 1025R 120R Loader 60D Deck It may come at a compact price ... but there’s nothing compact about its capabilities.  

 

Add a Auto-Connect Drive Over Mower Deck From $2500

• Quick and easy installation and removal – with or without a loader installed on the tractor
• Includes a ramp system
• Built with 7-gauge steel

 

Add Quik-Park Loader From $3750

• Forget hopping on and off your tractor. In a few quick and easy steps, you can attach a loader and get
right to work.
• Takes just minutes!
• No tools required

 

Add a iMatch Quick-Hitch From $300

• Go from using one implement to the next in a matter of minutes – without leaving the tractor seat
• Compatible with dozens of implements
• Makes using 3-point hitch implements safer and less time-consuming

 

John Deere 1025R Compact Utility Tractor for Sale Lease from Cross Implement a John Deere Dealer Serving the Midwest region from Illinois, Iowa, Indiana & Missouri

 

Putting the Able in Affordable.

The 1025R It may come at a compact price ... but there’s nothing compact about its capabilities.  

 

Compromise?

It’s not in our vocabulary. That’s why we built the 1025R to be more than just a standard, sub-compact tractor. Like the 1025R, it sports the widest stance in the category for greater stability. And the rugged stamped-steel deck includes reliable, dial-type height-of-cut control as well as integrated independent lift.

 

The 1025R has plenty of comfort features as well: adjustable seat, effortless Twin Touch™ hydrostatic transmission, and color-coded controls for easy identification. And when you factor in attachment-friendly features like mower decks with AutoConnect™, Quik-Park™ H-Series Loaders, and iMatch™ Quick Hitch, the 1025R redefines value in the sub-compact category.

 

The foldable Roll-Gard ROPS is also standard on the 1025R. Retractable seat belts are located on the fender to keep the belt from being tangled in the seat suspension or controls.

 

The fender is contour-molded and positioned for a clean, modern look. It’s also large enough to handle containers, tools, cell phones, etc. And naturally, it’s easily within reach.

 

The 1025R also features an updated hood. The gas-charged lift struts quickly lift and support the hood for easy maintenance.

 

Twin Touch foot controls are faster, easier, and more precise to operate than a treadle pedal design found on other tractors. A rugged hydrostatic transmission delivers infinite grounds speeds, even at full-throttle. And, you don’t have to clutch in order to change directions.

 

Both 1 Family Tractors feature standard four-wheel drive for extra traction in slick conditions and increased drawbar pull. Also, a differential lock is standard with on-the-go engagement for more traction.

 

John Deere 1025R (2017)
Engine
Family EYDXL1.27NS1
FYDXL1.27NS1
GYDXL1.27NS1
Manufacturer Yanmar
Engine model 3TNV80F-NCJT
Engine power (gross) 17.8 kW
23.9 hp
24.2 PS
SAE J1995 rated power
Power take-off (PTO) power 13.4 kW
18 hp
Rated engine speed 3200 rpm
Type Diesel
Injection pump type Indirect Injection
Aspiration Natural
Emissions compliance Final Tier 4
Cylinders/displacement 3 / 1.267 L
3 / 77.3 cu in.
Number of cylinders Three
Cylinder liners Cast-in-block
Bore and stroke 80x84 mm
3.15x3.31 in.
Compression ratio 23.0:1
Lubrication Pressurized
Cooling system Water pump
Air cleaner Dual element with mechanical restriction indicator
Engine torque at rated speed 55.2 Nm
40.7 lb-ft
Fuel tank capacity 21.2 L
5.6 U.S. gal.
Electrical
Battery size 500 CCA
Alternator (12-V) 40 amp
Starter size 1.2 kW
1.6 hp
Fuel system
Type Indirect Injection
Fuel consumption 5.8 L/hr
1.5 U.S. gal./hr
Transmission
Standard transmission; forward/reverse Hydrostatic - 2 range
Left-hand reverser No
Final drive Bull Gear
Brakes Wet disc (left-hand pedal)
Steering Power
Clutch, wet/dry N/A
Axle capacity ---
Front 612 kg
1349 lb
Rear 715 kg
1576 lb
Creeper No
Cruise control Standard
Differential lock Yes
Hydraulics
Type Open center
Pump rated output 24 L/min
6.3 gpm
Steering 10.8 L/min
2.8 gpm
Implement 13.2 L/min
3.5 gpm
Pump type Gear
Maximum operating pressure 137.9 bar
2000 psi
Draft control sensing Position control
Remote control valves available Two
3-point hitch
Category Limited Category 1
Lift capacity, 24-in. behind link arms 309 kg
681 lb
Power take-off (PTO)
Standard Rear - 540 rpm
Mid - 2100 rpm
Control Independent
Clutch Wet disc
Brake (for mid and rear PTO) Wet disc
Fluid capacities
Crankcase with filter 2.7 L
2.9 qt
Transmission and hydraulic system 3.7 gal.
14 L
Final drive
Type Bull Gear
Differential lock Yes
Operator station
Rollover protective structure Yes
Type Foldable
Platform - flat/straddle One-piece semi flat
Gear shift location - console/floor Left-hand side
Cab
Compliance NA
Visibility NA
Air conditioning, temperature differential NA
Doors NA
Noise rating NA
Seat equipment NA
Dimensions
Wheelbase 145 cm
57.1 in.
Front axle clearance 195 mm
7.7 in.
Turning radius without brakes 2.25 m
7.4 ft
Limited slip differential No
Approximate shipping weight (open-station; cab) 655 kg
1444 lb
Tires
Front R4 - 18x8.5-10
Rear R4 - 26x12-12
Front tread range 91.8 cm
36.1 in.
Miscellaneous
Toolbox Yes 

 

*Qualifies for Low Rate JDF Financing Plus Applicable Participation Fees, Additional Terms and Conditions Apply. Subject to John Deere Credit Approval with Qualified Down Payment. Not everyone will qualify for low rate option. Residency restrictions may apply. Purchase or Renew Only offers a fixed purchase option without surrender option. Customer may purchase, trade, or renew at end of lease. Product features are based on published information at the time of publication. Product features are subject to change without notice. Some Restrictions Apply. Subject to Availability. See Dealer for Details. Ag & Commercial use only. Horsepower ratings are for comparison purposes only and are estimates. This schedule is only an estimate.*