Search
Inventory

John Deere 2633VT Vertical Tillage

John Deere 2633VT Vertical Tillage

 

John Deere’s 2633VT provides a unique solution to the vertical tillage market that gives operators the performance and productivity they have been looking for in a vertical tillage machine.

 

Whether the plan is to use the 2633VT in the spring or fall, this machine was designed to handle any residue management situation. With a 21-degree angle on the front gang and 19-degree gang angle on the rear gang, this tool was created to have aggressive sizing and chopping ability in tough residue in the fall and to have finishing characteristics to build an ideal seedbed in the spring.

 

Shallow gang angle vertical tillage tools can leave a wavy, washboard effect unsuitable for a proper seedbed. The 2633VT implement has an aggressive gang angle to help anchor residue, manage weeds and root balls, and create an even, smooth seedbed under the topsoil.

 

As crop yields increase, so does the amount of residue after harvest. The John Deere 2633VT allows producers to prepare soil for planting in the spring and residue management in the fall.

 

The 2633VT offers an active hydraulic rolling baskets that give the operator wide-ranging adjustability for a variety of conditions. The drawbars and rolling basket on the rear harrow are built with strength in mind for demanding vertical tillage conditions.

The system was designed to have the ability to run the rolling baskets in three different positions:

  • Raised

    • Allows the operator to raise the rolling baskets in harsh, muddy conditions

  • Float

    • Allows the operator to float the rolling baskets to lightly fluff soil

  • Apply down pressure

    • Allows the operator to adjust the basket pressure to provide consistent contact with the ground

    • Provides a firm seedbed

    • Shatters root balls

 

The hydraulic rolling basket is offered with a round bar, flat bar, or knife-edge. The flat bar is not recommended for rocky conditions. The knife-edge is best for heavier, wet soil.

 

6040   Hydraulic round-bar rolling basket harrow

NOTE: Compatible with 2633VT
6041   Hydraulic flat-bar rolling basket harrow

NOTE: Compatible with 2633VT - not recommended for rocky conditions
6042   Hydraulic knife-edge rolling basket harrow

NOTE: Compatible with 2633VT

 

The 2630 Series Disks offer multiple upgrades and new items as options versus the 2620 Series Disks to enhance the machine.

 
Extended-life bearings
 

John Deere’s 2630 Series Disks and Vertical Tillage Implements feature extended-life bearings. These more durable and reliable bearings allow producers to customize bearing maintenance for specific growing conditions and soil type.

 
TruSet™ side-to-side feature
 

John Deere TruSet system is featured in base equipment for the 2630 Series Disks and Vertical Tillage Implements. TruSet side-to-side is also available and features individual section leveling.

 
Knife-edge hydraulic rolling basket
 

The hydraulic rolling basket is now offered with a round bar, flat bar, or knife-edge. The knife-edge is best for heavier, wet soil, and can be used in rocky conditions.

 
Radial tires
 

The 2630 Series Disks and Vertical Tillage Implements feature radial tires for the mainframes in base equipment. Radial tires are available as an option on the wing frame and stabilizer wheels. These tires are designed to offer longer wear life and help minimize compaction with a wider plate and lower inflation pressures.

 
Stabilizer wheels
 

Producers can choose either mechanical stabilizer wheels or TruSet hydraulic stabilizer wheels as an option. Stabilizer wheels help to maintain a consistent, level depth and are recommended for operation on rolling ground. The mechanical stabilizer wheels can be manually adjusted with a turnbuckle. TruSet with side-to-side leveling capabilities also enables operators to control the TruSet hydraulic stabilizer wheels from the cab while on the go.

 

Utilize the residue calculator to identify the optimal residue management solution to meet the producer’s needs.


The 2633VT is the right tool for producers wanting to size residue, mix soil, and create an ideal seedbed.

The John Deere 2633VT offers six different sizes to fit any size operation, big or small.

 

Model 2633VT
Purpose Vertical tillage
Working depth Up to 75 mm (3 in.)
Standards C-spring
Gang angle 21 degrees front
19 degrees rear
Front gang blades
  • 560 mm x 5 mm (22 in. x 0.197 in.) solid shallow concavity spherical
  • Optional 560 mm x 6.5 mm (22 in. x 0.256 in.) solid shallow concavity spherical
Rear gang blades 560 mm x 5 mm (22 in. x 0.197 in.) solid shallow concavity 13 wave
Blade spacing 185 mm (7.25 in.)
Gang bolt 50 mm (2 in.)
Horsepower 27-36 hp/m (8.5-11 hp/ft) working width
Working widths 6.3 m to 12.4 m (20 ft, 9 in. to 40 ft, 8 in.)
Operating speed 11-16 km/h (7-10 mph)
 
 

 

Size

6.3 m
(20 ft, 9 in.)

8 m
(26 ft, 5 in.)

8.9 m
(29 ft, 3 in.)

9.3 m
(30 ft, 8 in.)

10.2 m
(33 ft, 7 in.)

12.4 m
(40 ft, 8 in.)

Weight

6796 kg
(14,983 lb)

9060 kg
(19,976 lb)

9230 kg
(20,343 lb)

9920 kg
(21,871 lb)

10025 kg
(22,100 lb)

12991 kg
(28,641 lb)

Number of blades

68

88

96

104

112

136

Weight per blade

100 kg
(220 lb)

103 kg
(227 lb)

96 kg
(211 lb)

95 kg
(210 lb)

90 kg
(197 lb)

95 kg
(210 lb)

Horsepower requirement
(power take-off [PTO])

131.2-170 kW
(176-228 hp)

164.8-213.3 kW
(221-286 hp)

184.2-237.9 kW
(247-319 hp)

196.1-254.3 kW
(263-341 hp)

208.8-270.7 kW
(280-363 hp)

259.5-335.6 kW
(348-450 hp)

Transport height

3.05 m
(10 ft)

3.90 m
(12 ft, 10 in.)

4.30 m
(14 ft, 1 in.)

4.21 m
(13 ft, 10 in.)

4.62 m
(15 ft, 2 in.)

3.75 m
(12 ft, 4 in.)

Transport width

4.11 m
(13 ft, 6 in.)

4.11 m
(13 ft, 6 in.)

4.11 m
(13 ft, 6 in.)

4.77 m
(15 ft, 8 in.)

4.77 m
(15 ft, 8 in.)

4.95 m
(16 ft, 3 in.)